
Raghav fallout badge
Pegoku/fallout-badge
ESP-NOW-Powered Bidirectional Wireless Communicator Badge

ESP-NOW-Powered Bidirectional Wireless Communicator Badge
PCB Fallout is an open-source printed circuit board by Pegoku, from the Pegoku/fallout-badge repository on GitHub. It is a 2-layer board of 35.5 × 45.8 mm with 30 parts on 25 nets, routed with 106 tracks and 5 vias.
It is built around the KT-0805Y. Its parts include 14 diodes, 10 resistors, 3 switches and 1 IC. It belongs with the ESP32 and RISC-V boards of this library.
From: @Pegoku
ESP32-C3 based boards that connect to each other and let you send and receive messages using ESPNOW.




| Item | Quantity | JLCPCB PN. |
|---|---|---|
| XIAO ESP32-C3 | 1 | N/A |
| 100 Ω resistor | 10 | C22775 |
| Push button | 3 | C318884 |
| 0805 Red LED | 14 | C84256 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | KT-0805Y | LED_SMD:LED_PLCC-2_3x2mm_KA | LED0, LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13 |
| 10 | 100ohm | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R0, R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 3 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2, SW3 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2 |
| 1 | XIAO-ESP32-C3-DIP | Seeed Studio XIAO Series Library:XIAO-ESP32-C3-DIP | U1 |

Pegoku/fallout-badge
ESP-NOW-Powered Bidirectional Wireless Communicator Badge


Pegoku/fallout-badge
ESP-NOW-Powered Bidirectional Wireless Communicator Badge

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

demik/quack
Bluetooth and ADB Mouse Converter for Macintosh 128/512/Plus, Apple Lisa and Apple IIc

geezacoleman/owl-driver-board
Development of a board that receives GPIO input and allows on/off control of connected solenoids.



Janky-Jingle-Crew/SouthPoleLevitator
2025 Christmas card "South Pole Levitator"

igorilla666/water-controller
Scheda di controllo basata sul modulo Waveshare ESP32-S3-ETH, con ingressi sensore, RS-485, pilotaggio rele, buzzer e alimentazione/protezioni dedicate.

It measures 35.5 × 45.8 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the KT-0805Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Pegoku/fallout-badge repository on GitHub, at the commit this page was made from: the board is other-SMCHDs/emefedez-fallout-badge/PCB_Fallout.kicad_pcb and its schematic other-SMCHDs/08ibai-fallout-badge/badgePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Pegoku before reusing the design.