Skip to the content
12

KT-0805Y

Hubei KENTO ElecJLCPCB basic

-40℃~+85℃ 1.8V~2.4V 120° 175mcd 40mW 584nm~594nm 596nm Discrete Diode Water Clear Yellow 0805 LED Indication - Discrete ROHS

Part id
kento/KT-0805Y
Category
LED Indication, Discrete
Package
0805
Pins
2
In stock
589,366 at JLCPCB (C2296)
Used on
44 open-source boards

Overview

The KT-0805Y is a LED Indication, Discrete made by Hubei KENTO Elec in a 0805 package with 2 pins. -40℃~+85℃ 1.8V~2.4V 120° 175mcd 40mW 584nm~594nm 596nm Discrete Diode Water Clear Yellow 0805 LED Indication - Discrete ROHS.

PCBKit's library has its KiCad symbol (Device:LED, from KiCad's library) and its footprint (LED_SMD:LED_0805_2012Metric, from KiCad's library), ready for a KiCad board. 589,366 are in stock at JLCPCB (part C2296). 44 open-source boards in 36 repositories on GitHub use it.

Symbol

Device:LEDFrom KiCad's library

Footprint

12
LED_SMD:LED_0805_2012MetricFrom KiCad's library

From the datasheet

4
Forward current, most
20 mA · IF, continuous max at ambient 25 °C · p. 3
Reverse voltage, most
5 V · VR, absolute max at ambient 25 °C · p. 3
Works from
-40 °C · Topr, operating ambient min · p. 3
Works up to
85 °C · Topr, operating ambient max · p. 3

What it is and has

6
Package dimensions
2.0*1.2*0.8mm · p. 2
Emission color
Yellow · p. 2
Emission type
Single color · p. 2
Soldering method
Reflow · p. 2
Compliance
RoHS · p. 2
Packing quantity
3000 pcs/reel · p. 5

Specifications

12
ParameterConditionsAs printedPage
顺向电流 IF环境温度=25℃max 20 mA3
顺向峰值电流 *1 IFP环境温度=25℃; *1max 100 mA3
反向电压 VR环境温度=25℃max 5 V3
焊接温度 Tsol回流焊,8sec.max 250 °C3
焊接温度 Tsol手工焊,3sec.max 300 °C3
使用温度 Toprmin -40 · max 85 °C3
储存温度 Tstgmin -40 · max 85 °C3
顺向电压 Vf环境温度=25°Cmin 2 · max 2.2 V3
亮度 Iv环境温度=25°C; IF=20mAmin 95 · max 113 mcd3
发光角度 2Ө1/2环境温度=25°Ctyp 120 deg3
反向电流 IR环境温度=25°C; VR=5Vmax 1 uA3
波长 WLD环境温度=25°C; IF=20mAmin 592 · max 594 nm3

Open-source boards using it

44See all 44
  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0
  • 2 layers56.6 × 57.7 mmQuack, the printed circuit board in 3D

    Quack

    demik/quack

    Bluetooth and ADB Mouse Converter for Macintosh 128/512/Plus, Apple Lisa and Apple IIc

    52 parts21Apache-2.0
  • 4 layers250.4 × 131 mmPanel-16, the printed circuit board in 3D

    Panel-16

    geezacoleman/owl-driver-board

    Development of a board that receives GPIO input and allows on/off control of connected solenoids.

    939 parts14MIT
  • 4 layers57.4 × 49.9 mmPhoniesp32, the printed circuit board in 3D

    Phoniesp32

    butzist/phoniesp32

    A kid-friendly jukebox powered by the ESP32

    82 parts11MIT
  • 4 layers82.9 × 64.6 mmPico2-MSX, the printed circuit board in 3D

    Pico2-MSX

    Guimli/Pico2-MSX

    MultiROM for MSX based on Pico2

    67 parts9MIT
  • 4 layers30.1 × 30.1 mmMaglev driver, the printed circuit board in 3D

    Maglev driver

    Janky-Jingle-Crew/SouthPoleLevitator

    2025 Christmas card "South Pole Levitator"

    65 parts3
  • 2 layers35.5 × 45.8 mmPCB Fallout, the printed circuit board in 3D

    PCB Fallout

    Pegoku/fallout-badge

    ESP-NOW-Powered Bidirectional Wireless Communicator Badge

    30 parts3
  • 2 layers160 × 110 mmAcquedotto test v4 finale, the printed circuit board in 3D

    Acquedotto test v4 finale

    igorilla666/water-controller

    Scheda di controllo basata sul modulo Waveshare ESP32-S3-ETH, con ingressi sensore, RS-485, pilotaggio rele, buzzer e alimentazione/protezioni dedicate.

    139 parts1CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the KT-0805Y?

Yes. The symbol is Device:LED and the footprint LED_SMD:LED_0805_2012Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the KT-0805Y?

0805, with 2 pins. Its footprint is drawn on this page.

Where is the KT-0805Y datasheet?

Hubei KENTO Elec publishes it: the Datasheet link on this page opens it.

Where can I order the KT-0805Y?

JLCPCB lists it as part C2296, with 589,366 in stock; the sellers' links on this page open their listings.

What can replace the KT-0805Y?

Parts like it in the library: the KT-0805G by Hubei KENTO Elec, the NCD0805R1 by Foshan NationStar Optoelectronics, the XL-2012SURC by XINGLIGHT and the XL-2012UGC by XINGLIGHT. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the KT-0805Y?

44 boards in 36 repositories on GitHub; the most starred are listed on this page, with their KiCad files.