
Teds business card
DovydasTEDS/teds-business-card
an nfc business card with (i think) cool (sorta) artwork which took me longer than it should've it also has a qr code
Hubei KENTO ElecJLCPCB basic
-30℃~+85℃ 120° 13172K~100000K 2.6V~3.2V 25mA 350mcd 80mW Discrete Diode Top-mount White Yellow Lens 0805 LED Indication - Discrete ROHS
The KT-0805W is a LED Indication, Discrete made by Hubei KENTO Elec in a 0805 package with 2 pins. -30℃~+85℃ 120° 13172K~100000K 2.6V~3.2V 25mA 350mcd 80mW Discrete Diode Top-mount White Yellow Lens 0805 LED Indication - Discrete ROHS.
PCBKit's library has its KiCad symbol (Device:LED, from KiCad's library) and its footprint (LED_SMD:LED_0805_2012Metric, from KiCad's library), ready for a KiCad board. 328,261 are in stock at JLCPCB (part C34499). 14 open-source boards in 10 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| 消耗功率 Pd | Ta=25℃ | max 80 mW | 3 |
| 最大脉冲电流 IFP | Ta=25℃; 1/10占空比, 0.1ms脉宽 | max 100 mA | 3 |
| 正向直流工作电流 IF | Ta=25℃ | max 25 mA | 3 |
| 反向电压 VR | Ta=25℃ | max 5 V | 3 |
| 工作环境温度 Topr | min -30 · max 85 °C | 3 | |
| 存储环境温度 Tstg | min -40 · max 90 °C | 3 | |
| 焊接条件 Tsol | 回流焊, 10s | max 260 °C | 3 |
| 焊接条件 Tsol | 手动焊, 3s | max 300 °C | 3 |
| 光强 IV | Ta=25℃; IF =5mA | typ 350 mcd | 4 |
| 半光强视角 2θ1/2 | Ta=25℃; IF =5mA | typ 120 deg | 4 |
| 正向电压 VF | Ta=25℃; IF =5mA | min 2.6 · max 3.2 V | 4 |
| 反向电流 IR | Ta=25℃; VR=5V | max 1 uA | 4 |
| Q4 | IF=5mA | min 210 · max 250 mcd | 4 |
| R3 | IF=5mA | min 250 · max 300 mcd | 4 |
| R4 | IF=5mA | min 300 · max 360 mcd | 4 |
| S3 | IF=5mA | min 360 · max 430 mcd | 4 |
| 7A | IF=5mA | min 2.6 · max 2.7 V | 4 |
| 7B | IF=5mA | min 2.7 · max 2.8 V | 4 |
| 8A | IF=5mA | min 2.8 · max 2.9 V | 4 |
| 8B | IF=5mA | min 2.9 · max 3 V | 4 |
| 9A | IF=5mA | min 3 · max 3.1 V | 4 |

DovydasTEDS/teds-business-card
an nfc business card with (i think) cool (sorta) artwork which took me longer than it should've it also has a qr code

dweggg/MagneticLevitation
My take on one of those active magnetic levitation projects.


TechnikWeber/convertible-keyboard-pcb
Convertible keyboard PCB: full-size ISO-DE & ANSI with a snap-off numpad that turns it into a TKL (RP2040, USB-C, KiCad). Cheap, clean, modern core to build on — looking for a case designer.



vyrubaev/TV-Lift-Controller
TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.

enliktjioe/three-workshops
HfK Bremen - Three Workshops course from Ralf Baecker
Yes. The symbol is Device:LED and the footprint LED_SMD:LED_0805_2012Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.
0805, with 2 pins. Its footprint is drawn on this page.
Hubei KENTO Elec publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C34499, with 328,261 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the KT-0805G by Hubei KENTO Elec, the F.0805.00004/P2-0805G2TS2-08T-002 by TUOZHAN, the TZ-P2-0805BTCS2-0.8T by TUOZHAN and the ORH-B35A by Orient. Check their datasheets: a part that fits the footprint may still differ in its ratings.
14 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.