The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
Phmod is an open-source printed circuit board by gallicchio, from the gallicchio/AMOD-and-RFMOD repository on GitHub. It is a 4-layer board of 100 × 100 mm with 234 parts on 152 nets, routed with 802 tracks and 203 vias.
It is built around the OPA810ID, LMH6629SD and DRV8876PWP, with the OPA847ID, THS3491IRGTR and TPS65131RGER among its other parts. Its parts include 74 resistors, 66 capacitors, 30 connectors, 19 diodes and 15 ICs.
The tutorial's 2x12 adapter (~/mudd/133electronics/icepi-zero-dac-adc/adapter_board/) with a 2 x 6 right-angle Pmod
socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod plugs while
the AD9280/AD9708 module sits on top as before.
~/OpticsPCBs/IcepiZeroADCDAC/adapters/make_boards.py, board adda12p (the generator that drew
every adapter). These files are copies of its out/IcepiZero_AD9280_AD9708_2x12_Pmod/; rebuild there with
KICAD=10 ../kicad-python.sh make_boards.py adda12p and copy back. Its README section "The 2x12 with a Pmod" has
the reasons.*-pinmap.csv, *.lpf): the .lpf names them pmod[0] ... pmod[7] for the Pmod standard's IO1-8.| Pmod | pin | Icepi header pin | GPIO | ECP5 ball |
|---|---|---|---|---|
| IO1 | 1 | 10 | 15 | N1 |
| IO2 | 2 | 27 | 0 | G3 |
| IO3 | 3 | 36 | 16 | H3 |
| IO4 | 4 | 40 | 21 | F2 |
| IO5 | 7 | 8 | 14 | P1 |
| IO6 | 8 | 22 | 25 | J2 |
| IO7 | 9 | 28 | 1 | K3 |
| IO8 | 10 | 38 | 20 | F1 |
| GND | 5, 11 | |||
| 3.3 V | 6, 12 | 1 |
Header pins 3 and 5 (GPIO2, GPIO3; T2, R2) are spare.
IcepiZero_AD9280_AD9708_2x12_Pmod-gerbers.zip at JLCPCB as a 4-layer, 1.6 mm board (the price was not
checked on the day). Hand-solder J1 (2 x 20 female, 2.54 mm, on the BOTTOM: it takes the Icepi Zero's header), J2 (2 x 12 male, top,
for the module) and J3 (2 x 6 right-angle female, 2.54 mm, e.g. HC-PM254-8.5H-2x6PW, LCSC C22373932; housing face at
the board edge). Nothing else changes from the 2x12 adapter's instructions.| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | SMA | amod:SMA_BWSMA-KE-Z001_Vertical | J201, J202, J301, J302, J303, J304, J401, J501, J502, J503, J504, J601, J1001, J1002, J1003, J1004 +10 |
| 18 | 100n | Capacitor_SMD:C_0402_1005Metric | C107, C201, C203, C403, C504, C508, C605, C701, C702, C703, C704, C809, C902, C1001, C1002, C1006 +2 |
| 16 | 49.9 | Resistor_SMD:R_0402_1005Metric | R203, R301, R406, R501, R506, R507, R512, R605, R701, R702, R703, R706, R709, R801, R906, R1001 |
| 14 | 10u | Capacitor_SMD:C_0805_2012Metric | C101, C102, C103, C109, C110, C111, C114, C115, C116, C117, C202, C204, C401, C1004 |
| 13 | 1u | Capacitor_SMD:C_0402_1005Metric | C501, C502, C503, C505, C506, C507, C601, C602, C604, C901, C905, C906, C907 |
| 9 | 100k | Resistor_SMD:R_0402_1005Metric | R401, R402, R601, R602, R802, R803, R805, R806, R1010 |
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R204, R502, R503, R508, R509, R603, R902, R903, R1009 |
| 9 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q301, Q401, Q501, Q601, Q701, Q801, Q901, Q1001, Q1003 |
| 8 | ON | amod:SW_SPDT_Shouhan_MSK12C02 | SW301, SW401, SW501, SW601, SW701, SW801, SW901, SW1001 |
| 6 | 1N4148W | Diode_SMD:D_SOD-123 | D301, D302, D303, D304, D305, D306 |
| 6 | OPA810 | Package_TO_SOT_SMD:SOT-23-5 | U402, U601, U701, U702, U1001, U1002 |
| 5 | B5819W | Diode_SMD:D_SOD-123 | D101, D102, D401, D402, D1001 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R1002, R1003, R1004, R1006 |
| 4 | 2.2p | Capacitor_SMD:C_0402_1005Metric | C801, C803, C805, C808 |
| 4 | 499 | Resistor_SMD:R_0402_1005Metric | R704, R705, R707, R708 |
| 4 | BB133 | Diode_SMD:D_SOD-323 | D801, D802, D803, D804 |
| 3 | 100 | Resistor_SMD:R_0402_1005Metric | R103, R604, R1005 |
| 3 | 100p | Capacitor_SMD:C_0402_1005Metric | C603, C903, C1005 |
| 3 | 240 | Resistor_SMD:R_0402_1005Metric | R504, R510, R904 |
| 3 | 27 | Resistor_SMD:R_0402_1005Metric | R505, R511, R905 |
| 3 | LMH6629 | Package_TO_SOT_SMD:SOT-23-5 | U501, U502, U902 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C301, C302 |
| 2 | 10n | Capacitor_SMD:C_0402_1005Metric | C112, C1003 |
| 2 | 10u | Inductor_SMD:L_1210_3225Metric | L801, L802 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R109, R110 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R804, R807 |
| 2 | 4.7u | amod:L_4x4_XRNR4030 | L101, L102 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R107, R108 |
| 2 | 6.8p | Capacitor_SMD:C_0402_1005Metric | C113, C807 |
| 2 | GND | amod:TestPoint_Loop_RH-5019 | TP9901, TP9902 |
| 1 | +15V | amod:LED_0805_2012Metric_Kbar | LED101 |
| 1 | +5V | amod:LED_0805_2012Metric_Kbar | LED103 |
| 1 | -5V | amod:LED_0805_2012Metric_Kbar | LED102 |
| 1 | 1.1k | Resistor_SMD:R_0603_1608Metric | R302 |
| 1 | 1.3M | Resistor_SMD:R_0402_1005Metric | R102 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R405 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R1007 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R304 |
| 1 | 105k | Resistor_SMD:R_0402_1005Metric | R101 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R105 |
| 1 | 1n | Capacitor_SMD:C_0402_1005Metric | C806 |
| 1 | 1p | Capacitor_SMD:C_0402_1005Metric | C804 |
| 1 | 220n | Capacitor_SMD:C_0402_1005Metric | C104 |
| 1 | 22n | Capacitor_SMD:C_0402_1005Metric | C402 |
| 1 | 27n | Inductor_SMD:L_0402_1005Metric | L1002 |
| 1 | 2A | Fuse:Fuse_1812_4532Metric | F101 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1002 |
| 1 | 3.3k | Resistor_SMD:R_0402_1005Metric | R404 |
| 1 | 330n | Inductor_SMD:L_0805_2012Metric | L1001 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R106 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R205 |
| 1 | 4.7n | Capacitor_SMD:C_0402_1005Metric | C105 |
| 1 | 4.7p | Capacitor_SMD:C_0402_1005Metric | C802 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C108 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R1008 |
| 1 | 49.9 | Resistor_SMD:R_0603_1608Metric | R303 |
| 1 | 5.1k | Resistor_SMD:R_0402_1005Metric | R403 |
| 1 | 680 | Resistor_SMD:R_0402_1005Metric | R901 |
| 1 | 698 | Resistor_SMD:R_0402_1005Metric | R201 |
| 1 | 7.5p | Capacitor_SMD:C_0402_1005Metric | C106 |
| 1 | 75 | Resistor_SMD:R_0402_1005Metric | R202 |
| 1 | 88.7k | Resistor_SMD:R_0402_1005Metric | R104 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1004 |
| 1 | DIP4 | amod:SW_DIP_SPSTx04_Slide_1.27mm_DSHP04 | SW802 |
| 1 | DRV8876 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.66x2.46mm | U401 |
| 1 | LM2664 | Package_TO_SOT_SMD:SOT-23-6 | U102 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q902 |
| 1 | OPA847 | Package_TO_SOT_SMD:SOT-23-6 | U301 |
| 1 | Pmod | amod:PinHeader_2x06_P2.54mm_Horizontal_PZ254R-12-12P | J505 |
| 1 | SMAJ5.0A | Diode_SMD:D_SMA | D103 |
| 1 | THS3491 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U201 |
| 1 | TPS22917 | Package_TO_SOT_SMD:SOT-23-6 | U901 |
| 1 | TPS65131 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U101 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J101 |
| 1 | VM in | amod:TerminalBlock_KF301_1x02_P5.00mm | J402 |
| 1 | coil | amod:TerminalBlock_KF301_1x02_P5.00mm | J403 |
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
niklasdathe/IRBicycleWheelSpeedSensor
Configurable 940 nm IR spoke sensor with KiCad 10 hardware, linked Python/ngspice simulation, ESP-IDF RMT firmware, and JLCPCB exports.
tim4431/analog_programmable_matrix
DC-coupled 4x4 programmable analog matrix: signed gains, 1 MHz target, BNC I/O, Pico control, KiCad PCB and enclosure CAD.
tombueng/hilprobe
HILprobe: multi-function UUT probe for hardware-in-the-loop testing - RS-485, CAN FD, logic analyzer, 4-ch scope, two programmable UUT supplies. KiCad 10, 6 layers, RP2350B + ESP32-S3.
HW-Lab-Hardware-Design-Agency/WebScreen-PCB
WebScreen PCB designs, BOM and other manufacturing files.
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
234 parts, built around the OPA810ID, LMH6629SD, DRV8876PWP and OPA847ID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gallicchio/AMOD-and-RFMOD repository on GitHub, at the commit this page was made from: the board is hardware/phmod.kicad_pcb and its schematic hardware/amod_a.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gallicchio before reusing the design.