Skip to the content
123456

LM2664M6

Texas InstrumentsExtended

-40℃~+85℃ -5.5V~-1.8V 1.8V~5.5V 12Ω 40mA 500uA 80kHz 91% Inverted Not supported SOT-23-6 Charge Pumps ROHS

Part id
ti/LM2664M6
Category
Charge Pumps
Package
SOT-23-6
Pins
6
In stock
3,086 at JLCPCB (C840095)
Used on
22 open-source boards

Overview

The LM2664M6 is a charge Pump made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+85℃ -5.5V~-1.8V 1.8V~5.5V 12Ω 40mA 500uA 80kHz 91% Inverted Not supported SOT-23-6 Charge Pumps ROHS.

PCBKit's library has its KiCad symbol (tinkerforge:LM2664, from Tinkerforge) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 3,086 are in stock at JLCPCB (part C840095). 22 open-source boards in 13 repositories on GitHub use it.

Symbol

5V+4nSD1GND6CAP+3CAP-2OUT
tinkerforge:LM2664From Tinkerforge

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

9
Supply, least
1.8 V · V+, recommended operating minimum · p. 5
Supply, most
5.5 V · V+, recommended operating maximum · p. 5
Supply, absolute maximum
5.8 V · V+ to GND, absolute maximum · p. 4
Junction, hottest
150 °C · Junction temperature, absolute maximum · p. 4
Takes working
220 µA · V+, typical no-load supply current at 5 V · p. 5
Takes asleep
1 µA · V+, typical shutdown supply current · p. 5
Gives
40 mA · Rated output current, minimum capability · p. 5
Switches at
80 kHz · Typical switching frequency · p. 5
Junction to air (DBV)
210 K/W · Junction-to-ambient thermal resistance · p. 4

What it is and has

5
Function
Inverts input supply voltage · p. 1
Package
6-pin SOT-23 · p. 1
Output impedance
12 Ω typical · p. 1
Conversion efficiency
91% typical at 40 mA · p. 1
Shutdown current
1 µA typical · p. 1

Around it

1
cap 3.3 µF
between CAP+ and CAP−; C1 charge-pump capacitor; SC series OS-CON in the test circuit. Place close to the device with short, wide traces. · p. 7

Specifications

23
ParameterConditionsAs printedPage
Supply voltage (V+ to GND, or GND to OUT)Over operating free-air temperature rangemax 5.8 V4
V+ and OUT continuous output currentOver operating free-air temperature rangemax 50 mA4
Output short-circuit duration to GNDSee footnote (3)max 1 sec.4
Continuous power dissipationTA = 25°Cmax 600 mW4
TJMax TJMaxSee footnote (4)max 150 °C4
Lead temp. (soldering, 10 seconds)Soldering, 10 secondsmax 300 °C4
Storage temperature range Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pinsmax 2000 V4
Operating junction temperaturemin -40 · max 85 °C4
Junction-to-ambient thermal resistance RθJALM2664, DBV, 6 pinstyp 210 °C/W4
Supply voltage V+TJ = 25°C, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangemin 1.8 · max 5.5 V5
Supply current IQNo load; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangetyp 220 · max 500 uA5
Shutdown supply current ISDTJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uFtyp 1 uA5
Shutdown pin input voltage VSDNormal operation; V+ = 5 V; minimum input high equals 40% of V+min 2 V5
Shutdown pin input voltage VSDShutdown mode; V+ = 5 V; maximum input low equals 20% of V+max 0.8 V5
Output current ILTJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangemin 40 mA5
Sum of the Rds(on)of the four internal MOSFET switches RSWIL = 40 mA; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangetyp 4 · max 8 Ω5
Output resistance ROUTIL = 40 mA; includes internal switch resistance and capacitor ESR; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangetyp 12 · max 25 Ω5
Oscillator frequency fOSCSee (7); TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangemin 80 · typ 160 kHz5
Switching frequency fSWSee (7); TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangemin 40 · typ 80 kHz5
Power efficiency PEFFRL (1 k) between GND and OUT; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangemin 90 · typ 94 %5
Power efficiency PEFFIL = 40 mA to GND; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uFtyp 91 %5
Voltage conversion efficiency VOEFFNo load; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature rangemin 99 · typ 99.96 %5

Pins, by the datasheet

6
1 GND
Power supply ground input. · p. 3
2 OUT
Negative voltage output. · p. 3
3 CAP−
Connect to the negative terminal of the charge-pump capacitor. · p. 3
4 SD
Shutdown control; tie to V+ for normal operation and GND for shutdown. · p. 3
5 V+
Power supply positive voltage input. · p. 3
6 CAP+
Connect to the positive terminal of the charge-pump capacitor. · p. 3

Ordering codes, by the datasheet

6
LM2664M6/NOPB
SOT-23 (DBV) · 6 pins; 1000-unit SMALL T&R; operating temperature -40 to 85 °C · p. 15
LM2664M6/NOPB.A
SOT-23 (DBV) · 6 pins; 1000-unit SMALL T&R; operating temperature -40 to 85 °C · p. 15
LM2664M6/NOPB.B
SOT-23 (DBV) · 6 pins; 1000-unit SMALL T&R; operating temperature -40 to 85 °C · p. 15
LM2664M6X/NOPB
SOT-23 (DBV) · 6 pins; 3000-unit LARGE T&R; operating temperature -40 to 85 °C · p. 15
LM2664M6X/NOPB.A
SOT-23 (DBV) · 6 pins; 3000-unit LARGE T&R; operating temperature -40 to 85 °C · p. 15
LM2664M6X/NOPB.B
SOT-23 (DBV) · 6 pins; 3000-unit LARGE T&R; operating temperature -40 to 85 °C · p. 15

Open-source boards using it

22See all 22
  • 2 layers38.6 × 90.3 mmBioElectricalSensor, the printed circuit board in 3D

    BioElectricalSensor

    CGrassin/biosignals

    Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).

    107 parts15MIT
  • 2 layers61.8 × 52.9 mmJetKVM audio expansion, the printed circuit board in 3D

    JetKVM audio expansion

    calvss/jetKVM-audio-expansion

    JetKVM-compatible audio expansion board

    67 parts12BSD-3-Clause
  • 4 layers100 × 50 mmPsu ext, the printed circuit board in 3D

    Psu ext

    PSU-Ext-Org/psu-ext-hardware

    A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.

    137 parts9CERN-OHL-S-2.0
  • 4 layers45.5 × 52 mmEeg, the printed circuit board in 3D

    Eeg

    jwmke/eeg

    Open Source 8-channel EEG Pi Pico Shield for <$80

    73 parts7
  • 2 layers89.9 × 42.7 mmMonolith, the printed circuit board in 3D

    Monolith

    Monolith-BCI/Trillium-PCB

    We're a group of teens working on creating a BCI PCB to start running our own experiments on noise filtering, signal processing speed, and data collection.

    89 parts5
  • 4 layers61.4 × 61.3 mmCyton wired, the printed circuit board in 3D

    Cyton wired

    BostonUniversitySeniorDesign/brain-4ce

    Where thoughts become motion. Designed by BU ECE 2023 Senior Design Capstone Team 4 From left to right: Brendan Shortall, Mitchell Gilmore, Dayanna De La Torres, Jonathan Mikalov, Alexander Johnson

    100 parts3
  • 2 layers50 × 50 mmUps, the printed circuit board in 3D

    Ups

    hrandib/upsv2

    BQ24610-based low power DC UPS

    71 parts3
  • 4 layers28.1 × 32.6 mmThinkerAFE, the printed circuit board in 3D

    ThinkerAFE

    yelabb/pcbfork

    A browser sandbox testing if LLMs can optimize KiCad board layouts by treating the AI as an untrusted proposal generator for low-noise biosignal PCBs

    57 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM2664M6?

Yes. The symbol is tinkerforge:LM2664 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM2664M6?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the LM2664M6 datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM2664M6?

JLCPCB lists it as part C840095, with 3,086 in stock; the sellers' links on this page open their listings.

What can replace the LM2664M6?

Parts like it in the library: the LM2664M6X by Texas Instruments, the ME2135A50M6G by MICRONE, the LM2776DBV by Texas Instruments and the TX4310B by XDS. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM2664M6?

22 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.