
LM2664M6X
Texas InstrumentsExtended
-40℃~+85℃ -5.5V~-1.8V 1.8V~5.5V 12Ω 220uA 40mA 80kHz 91% Inverted Not supported SOT-23-6 Charge Pumps ROHS
- Part id
- ti/LM2664M6X
- Category
- Charge Pumps
- Package
- SOT-23-6
- Pins
- 6
- In stock
- 162,572 at JLCPCB (C108573)
- Used on
- 1 open-source board
Overview
The LM2664M6X is a charge Pump made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+85℃ -5.5V~-1.8V 1.8V~5.5V 12Ω 220uA 40mA 80kHz 91% Inverted Not supported SOT-23-6 Charge Pumps ROHS.
PCBKit's library has its KiCad symbol (tinkerforge:LM2664, from Tinkerforge) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 162,572 are in stock at JLCPCB (part C108573). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 1.8 V · V+, recommended operating min · p. 5
- Supply, most
- 5.5 V · V+, recommended operating max · p. 5
- Supply, absolute maximum
- 5.8 V · V+ to GND, absolute max · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 220 µA · V+, no load, 5 V, typical · p. 5
- Takes asleep
- 1 µA · V+, shutdown, typical · p. 5
- Gives
- 40 mA · Output current min · p. 5
- Switches at
- 80 kHz · Switching frequency typical · p. 5
- Junction to air (DBV)
- 210 K/W · Junction-to-ambient thermal resistance · p. 4
What it is and has
5- Function
- Inverts input supply voltage · p. 1
- Package
- 6-pin SOT-23 · p. 1
- Output impedance
- 12 Ω typical · p. 1
- Conversion efficiency
- 91% typical at 40 mA · p. 1
- Shutdown current
- 1 µA typical · p. 1
Around it
1- cap 3.3 µF
- between CAP+ and CAP−; C1 flying capacitor; test circuit uses SC series OS-CON. Place close to the device with short, wide traces. · p. 7
Specifications
23| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage (V+ to GND, or GND to OUT) | Over operating free-air temperature range | max 5.8 V | 4 |
| V+ and OUT continuous output current | Over operating free-air temperature range | max 50 mA | 4 |
| Output short-circuit duration to GND | OUT must not be shorted to GND or V+ above 85°C; shorting OUT to V+ may damage the device | max 1 sec. | 4 |
| Continuous power dissipation | TA = 25°C | max 600 mW | 4 |
| TJMax | max 150 °C | 4 | |
| Lead temp. (soldering, 10 seconds) | Soldering, 10 seconds | max 300 °C | 4 |
| Storage temperature range Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | max 2000 V | 4 |
| Operating junction temperature | min -40 · max 85 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | LM2664, DBV, 6 pins | typ 210 °C/W | 4 |
| Supply voltage V+ | TJ = 25°C, C1 = C2 = 3.3 uF | min 1.8 · max 5.5 V | 5 |
| Supply current IQ | No load; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature range | typ 220 · max 500 uA | 5 |
| Shutdown supply current ISD | TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF | typ 1 uA | 5 |
| Shutdown pin input voltage VSD | Normal operation; V+ = 5 V; minimum input high equals 40% of V+ | min 2 V | 5 |
| Shutdown pin input voltage VSD | Shutdown mode; V+ = 5 V; maximum input low equals 20% of V+ | max 0.8 V | 5 |
| Output current IL | V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature range | min 40 mA | 5 |
| Sum of the Rds(on)of the four internal MOSFET switches RSW | IL = 40 mA; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature range | typ 4 · max 8 Ω | 5 |
| Output resistance ROUT | IL = 40 mA; includes internal switch resistance and capacitor ESR; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature range | typ 12 · max 25 Ω | 5 |
| Oscillator frequency fOSC | See (7); TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature range | min 80 · typ 160 kHz | 5 |
| Switching frequency fSW | See (7); TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature range | min 40 · typ 80 kHz | 5 |
| Power efficiency PEFF | RL (1 k) between GND and OUT; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature range | min 90 · typ 94 % | 5 |
| Power efficiency PEFF | IL = 40 mA to GND; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF | typ 91 % | 5 |
| Voltage conversion efficiency VOEFF | No load; TJ = 25°C, V+ = 5 V, C1 = C2 = 3.3 uF; limits apply over full operating temperature range | min 99 · typ 99.96 % | 5 |
Pins, by the datasheet
6- 1 GND
- Power supply ground input. · p. 3
- 2 OUT
- Negative voltage output. · p. 3
- 3 CAP−
- Connect to the negative terminal of the charge-pump capacitor. · p. 3
- 4 SD
- Shutdown control; tie to V+ for normal operation and GND for shutdown. · p. 3
- 5 V+
- Power supply positive voltage input. · p. 3
- 6 CAP+
- Connect to the positive terminal of the charge-pump capacitor. · p. 3
Ordering codes, by the datasheet
6- LM2664M6/NOPB
- SOT-23 (DBV) · 1000, SMALL T&R; operating temperature -40 to 85°C · p. 15
- LM2664M6/NOPB.A
- SOT-23 (DBV) · 1000, SMALL T&R; operating temperature -40 to 85°C · p. 15
- LM2664M6/NOPB.B
- SOT-23 (DBV) · 1000, SMALL T&R; operating temperature -40 to 85°C · p. 15
- LM2664M6X/NOPB
- SOT-23 (DBV) · 3000, LARGE T&R; operating temperature -40 to 85°C · p. 15
- LM2664M6X/NOPB.A
- SOT-23 (DBV) · 3000, LARGE T&R; operating temperature -40 to 85°C · p. 15
- LM2664M6X/NOPB.B
- SOT-23 (DBV) · 3000, LARGE T&R; operating temperature -40 to 85°C · p. 15
Open-source boards using it
1- 2 layers70.5 × 33.7 mm

Parts like it
8ME2135A50M6G
SOT-23-6-40℃~+125℃ 2.7V~5.5V 300mA 4.85V~5.15V 650kHz 800uA 81% boost converter SOT-23-6 Charge Pumps ROHSMICRONECharge PumpsLM2776DBV
SOT-23-6-40℃~+85℃ -5.5V~-2.7V 2.5Ω 2.7V~5.5V 200mA 200uA 2MHz 90% Inverted Support SOT-23-6 Charge Pumps ROHSTexas InstrumentsCharge PumpsTX4310B
SOT-23-6-40℃~+85℃ 1.2MHz 1.8V~5V 3.17V~3.43V 300mA 650uA 83% boost converter SOT-23-6 Charge Pumps ROHSXDSCharge PumpsHX4002-MFC
SOT-23-6-40℃~+85℃ 1.2MHz 1.8mA 2.7V~5V 250mA 4.8V~5.2V 83% boost converter SOT-23-6 Charge Pumps ROHSHEXINCharge PumpsME2135A33M6G
SOT-23-6-40℃~+125℃ 1.8V~5.5V 250mA 3.3V 400uA 650kHz boost converter SOT-23-6 Charge Pumps ROHSMICRONECharge PumpsSGM3204YN6G/TR
SOT-23-6-40℃~+85℃ 1.4V~5.5V 1.84mA 200mA 4.2Ω 80% 950kHz Inverted SOT-23-6 Charge Pumps ROHSSG MicroCharge PumpsHX4004A-MFC
SOT-23-6-40℃~+85℃ 170uA 2.7V~4.5V 230mA 360kHz 4.83V~4.97V 78% boost converter SOT-23-6 Charge Pumps ROHSHEXINCharge PumpsLM2665M6X
SOT-23-6-40℃~+85℃ 1.25mA 12Ω 2.5V~5.5V 40mA 80kHz 90% Not supported boost converter、Step-down SOT-23-6 Charge Pumps ROHSTexas InstrumentsCharge Pumps
Questions
Is there a KiCad symbol and footprint for the LM2664M6X?
Yes. The symbol is tinkerforge:LM2664 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM2664M6X?
SOT-23-6, with 6 pins. Its footprint is drawn on this page.
Where is the LM2664M6X datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM2664M6X?
JLCPCB lists it as part C108573, with 162,572 in stock; the sellers' links on this page open their listings.
What can replace the LM2664M6X?
Parts like it in the library: the ME2135A50M6G by MICRONE, the LM2776DBV by Texas Instruments, the TX4310B by XDS and the HX4002-MFC by HEXIN. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LM2664M6X?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.