Skip to the content
123456

TPS22917DBV

Texas InstrumentsExtended

-40℃~+125℃ 0V~5.5V 1 2A 80mΩ Active High Load Switch Output discharge function、Soft-start、Reverse current blocking SOT-23-6 Power Distribution Switches ROHS

Part id
ti/TPS22917DBV
Category
Power Distribution Switches
Package
SOT-23-6
Pins
6
In stock
3,979 at JLCPCB (C2681320)
Used on
75 open-source boards

Overview

The TPS22917DBV is a power Distribution Switche made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+125℃ 0V~5.5V 1 2A 80mΩ Active High Load Switch Output discharge function、Soft-start、Reverse current blocking SOT-23-6 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Power_Management:TPS22917DBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 3,979 are in stock at JLCPCB (part C2681320). 75 open-source boards in 62 repositories on GitHub use it.

Symbol

1VIN2GND3ON4CT5QOD6VOUT
Power_Management:TPS22917DBVFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

11
Supply, least
1 V · VIN, recommended operating min · p. 5
Supply, most
5.5 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
6 V · VIN, absolute maximum · p. 5
Junction, hottest
125 °C · Maximum junction temperature · p. 5
Takes working
500 nA · VIN, typical quiescent current, enabled, VOUT open · p. 6
Takes asleep
10 nA · VIN, typical shutdown current, disabled, VOUT grounded, TPS22917 · p. 6
Gives
2 A · Maximum continuous switch current · p. 5
Junction to air (DBV (SOT-23))
183 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (DBV (SOT-23))
152 K/W · Junction-to-case top thermal resistance · p. 5
Junction to board (DBV (SOT-23))
34 K/W · Junction-to-board thermal resistance · p. 5
Edge
22 µs · Typical output fall time, RL = 10 Ω, CL = 1uF, RQOD short · p. 7

What it is and has

5
Package
6-pin SOT-23 (DBV) · p. 4
Switch architecture
P-channel MOSFET · p. 14
Adjustable timing
Configurable output slew rate · p. 14
Reverse current blocking
Always-on reverse current blocking · p. 1
Output discharge
Configurable QOD pin · p. 15

Around it

4
cap 7 V minimum voltage rating
between CT and VIN; Optional timing capacitor; leave CT open for fastest turn-on. · p. 5
cap >594 pF
between CT and VIN; Design example to keep inrush current below 150 mA. · p. 18
cap 47 µF
between VOUT and GND; Load capacitance in the typical application design example; place close to the device. · p. 17
res 480 Ω
between VOUT and QOD; External output discharge resistor in the shutdown sequencing design example. · p. 18

Specifications

88
ParameterConditionsAs printedPage
Input voltage VINOver operating free-air temperature rangemin -0.3 · max 6 V5
Output voltage VOUTOver operating free-air temperature rangemin -0.3 · max 6 V5
Enable voltage VONOver operating free-air temperature rangemin -0.3 · max 6 V5
QOD pin voltage VQODOver operating free-air temperature rangemin -0.3 · max 6 V5
Maximum continuous switch current IMAXmax 2 A5
Maximum pulsed switch current IPLSpulse < 300-us, 2% duty cyclemax 2.5 A5
Maximum junction temperature TJ,MAXmax 125 °C5
Storage temperature TSTGmin -65 · max 150 °C5
Maximum Lead temperature TLEAD10-s soldering timemax 300 °C5
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001min -2000 · max 2000 V5
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101min -500 · max 500 V5
Input voltage VINOver operating free-air temperature rangemin 1 · max 5.5 V5
Output voltage VOUTOver operating free-air temperature rangemin 0 · max 5.5 V5
High-level input voltage, ON VIHOver operating free-air temperature rangemin 1 · max 5.5 V5
Low-level input voltage, ON VILOver operating free-air temperature rangemin 0 · max 0.35 V5
QOD Pin Voltage VQODOver operating free-air temperature rangemin 0 · max 5.5 V5
Timing Capacitor Voltage Rating VCTOver operating free-air temperature rangemin 7 V5
Junction-to-ambient thermal resistance θJATPS22917, DBV (SOT-23), 6 PINStyp 183 °C/W5
Junction-to-case (top) thermal resistance θJCtopTPS22917, DBV (SOT-23), 6 PINStyp 152 °C/W5
Junction-to-board thermal resistance θJBTPS22917, DBV (SOT-23), 6 PINStyp 34 °C/W5
Junction-to-top characterization parameter ψJTTPS22917, DBV (SOT-23), 6 PINStyp 37 °C/W5
Junction-to-board characterization parameter ψJBTPS22917, DBV (SOT-23), 6 PINStyp 33 °C/W5
VIN Quiescent current IQ,VINEnabled, VOUT = Open; TJ = –40°C to +85°C; VIN = 1 V to 5.5 V; typical at 25°Ctyp 0.5 · max 1 uA6
VIN Quiescent current IQ,VINEnabled, VOUT = Open; TJ = –40°C to +125°C; VIN = 1 V to 5.5 Vmax 1.2 uA6
VIN Shutdown current ISD,VINDisabled, VOUT = GND (TPS22917); TJ = –40°C to +85°C; typical at 25°Ctyp 10 · max 100 nA6
VIN Shutdown current ISD,VINDisabled, VOUT = GND (TPS22917); TJ = –40°C to +105°Cmax 250 nA6
ON-Resistance RONIOUT = 200 mA; VIN = 5 V; TJ = 25°Ctyp 80 · max 100 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 5 V; TJ = –40°C to +85°Cmax 120 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 5 V; TJ = –40°C to +105°Cmax 130 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 5 V; TJ = –40°C to +125°Cmax 140 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 3.6 V; TJ = 25°Ctyp 90 · max 110 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 3.6 V; TJ = –40°C to +85°Cmax 140 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 3.6 V; TJ = –40°C to +105°Cmax 150 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 3.6 V; TJ = –40°C to +125°Cmax 160 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.8 V; TJ = 25°Ctyp 120 · max 150 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.8 V; TJ = –40°C to +85°Cmax 175 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.8 V; TJ = –40°C to +105°Cmax 185 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.8 V; TJ = –40°C to +125°Cmax 200 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.2 V; TJ = 25°Ctyp 170 · max 220 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.2 V; TJ = –40°C to +85°Cmax 265 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.2 V; TJ = –40°C to +105°Cmax 280 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.2 V; TJ = –40°C to +125°Cmax 300 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.0 V; TJ = 25°Ctyp 220 · max 300 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.0 V; TJ = –40°C to +85°Cmax 350 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.0 V; TJ = –40°C to +105°Cmax 370 mΩ6
ON-Resistance RONIOUT = 200 mA; VIN = 1.0 V; TJ = –40°C to +125°Cmax 390 mΩ6
ON Pin leakage IONEnabled (TPS22917); TJ = –40°C to +125°Cmin -10 · max 10 nA6
Smart Pull Down Resistance RPDVON ≤ VIL; TJ = –40°C to +105°C; typical at 25°Ctyp 750 kΩ6
RCB Activation Current IRCBEnabled, VOUT > VIN; TJ = –40°C to +125°C; typical at 25°Ctyp -0.5 · max -1 A6
RCB Activation time tRCBEnabled, VOUT > VIN + 200mV; TJ = –40°C to +125°C; typical at 25°Ctyp 10 us6
RCB Release Voltage VRCBEnabled, VOUT > VIN; TJ = –40°C to +125°C; typical at 25°Ctyp 25 mV6
VIN Reverse Leakage Current IIN,RCB0 V ≤ VIN + VRCB ≤ VOUT ≤ 5.5 V; TJ = –40°C to +105°Cmin -1 uA6
Output discharge resistance QODDisabled; TJ = –40°C to +105°C; typical at 25°Ctyp 150 Ω6
Turn ON Time tONVIN = 5.0 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 100 us7
Turn ON Time tONVIN = 5.0 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 4 us/pF7
Turn ON Time tONVIN = 3.6 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 120 us7
Turn ON Time tONVIN = 3.6 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 3.8 us/pF7
Turn ON Time tONVIN = 1.8 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 200 us7
Turn ON Time tONVIN = 1.8 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 3.6 us/pF7
Turn ON Time tONVIN = 1.2 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 300 us7
Turn ON Time tONVIN = 1.2 V; CT ≥ 200 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 3.4 us/pF7
Turn ON Time tONVIN = 1.0 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 400 us7
Turn ON Time tONVIN = 1.0 V; CT ≥ 400 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 3 us/pF7
Output Rise Time tRVIN = 5.0 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 55 us7
Output Rise Time tRVIN = 5.0 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 1.8 us/pF7
Output Rise Time tRVIN = 3.6 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 65 us7
Output Rise Time tRVIN = 3.6 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 1.6 us/pF7
Output Rise Time tRVIN = 1.8 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 100 us7
Output Rise Time tRVIN = 1.8 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 1.2 us/pF7
Output Rise Time tRVIN = 1.2 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 150 us7
Output Rise Time tRVIN = 1.2 V; CT ≥ 200 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 0.95 us/pF7
Output Rise Time tRVIN = 1.0 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ωtyp 200 us7
Output Rise Time tRVIN = 1.0 V; CT ≥ 400 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 0.6 us/pF7
Turn ON Slew Rate SRONVIN = 5.0 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ω; fastest slew rate during tONtyp 72 mV/us7
Turn ON Slew Rate SRONVIN = 5.0 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 2300 (mV/us)*pF7
Turn ON Slew Rate SRONVIN = 3.6 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ω; fastest slew rate during tONtyp 44 mV/us7
Turn ON Slew Rate SRONVIN = 3.6 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 1900 (mV/us)*pF7
Turn ON Slew Rate SRONVIN = 1.8 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ω; fastest slew rate during tONtyp 14 mV/us7
Turn ON Slew Rate SRONVIN = 1.8 V; CT ≥ 100 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 1100 (mV/us)*pF7
Turn ON Slew Rate SRONVIN = 1.2 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ω; fastest slew rate during tONtyp 6.2 mV/us7
Turn ON Slew Rate SRONVIN = 1.2 V; CT ≥ 200 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 1000 (mV/us)*pF7
Turn ON Slew Rate SRONVIN = 1.0 V; CT = Open; 25°C; CL = 1 uF; RL = 10 Ω; fastest slew rate during tONtyp 3.9 mV/us7
Turn ON Slew Rate SRONVIN = 1.0 V; CT ≥ 400 pF; 25°C; CL = 1 uF; RL = 10 Ωtyp 1100 (mV/us)*pF7
Turn OFF Time tOFFVIN = 1 V to 5.5 V; 25°C; CL = 1 uF; RL = 10 Ωtyp 10 us7
Output Fall Time tFALLVIN = 1 V to 5.5 V; 25°C; RL = 10 Ω; CL = 1uF; RQOD = Shorttyp 22 us7
Output Fall Time tFALLVIN = 1 V to 5.5 V; 25°C; RL = Open; CL = 10uF; RQOD = Shorttyp 3.8 ms7
Output Fall Time tFALLVIN = 1 V to 5.5 V; 25°C; RL = Open; CL = 10uF; RQOD = 100 Ωtyp 5.9 ms7
Output Fall Time tFALLVIN = 1 V to 5.5 V; 25°C; RL = Open; CL = 220uF; RQOD = Shorttyp 72 ms7

Pins, by the datasheet

6
1 VIN
Switch input. · p. 4
2 GND
Device ground. · p. 4
3 ON
Active high switch control input; do not leave floating. · p. 4
4 CT
Switch slew rate control; connect a capacitor to VIN to increase output slew rate and turn-on time, or leave floating for fastest timing. · p. 4
5 QOD
Quick Output Discharge; connect to VOUT through an external resistor or directly using the internal resistor, or leave floating to disable discharge. · p. 4
6 VOUT
Switch output. · p. 4

Open-source boards using it

75See all 75
  • 6 layers133 × 92 mmMotherboard, the printed circuit board in 3D

    Motherboard

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    264 parts4.3kMIT
  • 4 layers95 × 55.5 mmEinkPDA keyboard, the printed circuit board in 3D

    EinkPDA keyboard

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    137 parts2kApache-2.0
  • 4 layers66.9 × 87 mmMeshtasticNode BQ25185, the printed circuit board in 3D

    MeshtasticNode BQ25185

    h0lad/SolarMeshtasticNode

    This is a Meshtastic Solar Node PCB based on the Heltec HT-CT62 and the linear solar charge controller TI BQ25185.

    49 parts40CERN-OHL-S-2.0
  • 2 layers75 × 60 mmDUTler V2, the printed circuit board in 3D

    DUTler V2

    TheYoctoJester/dutler

    A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.

    54 parts23Apache-2.0
  • 4 layers69 × 31 mmSilver, the printed circuit board in 3D

    Silver

    Foalyy/silver-kicad

    Kicad project for the Silver open-source, long-range camera remote control

    96 parts18GPL-3.0
  • 2 layersSuntastic, the printed circuit board in 3D

    Suntastic

    snorkman88/suntastic

    An ultra low-power management board for IoT devices

    120 parts13Apache-2.0
  • 4 layers48 × 45.5 mmLoRaHarvesterBox, the printed circuit board in 3D

    LoRaHarvesterBox

    h0lad/LoRaHarvesterBox

    PCB integrating a ST STM32WLE5CC and TI BQ25570 energy harvester. Ideal platform for ultra-low-power LoRa(WAN) nodes projects.

    46 parts11CERN-OHL-S-2.0
  • 4 layers36 × 46 mmPcb LR1110, the printed circuit board in 3D

    Pcb LR1110

    TheThingsIndustries/generic-node-te

    Generic Node Tracker Edition

    162 parts10

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS22917DBV?

Yes. The symbol is Power_Management:TPS22917DBV and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS22917DBV?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TPS22917DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS22917DBV?

JLCPCB lists it as part C2681320, with 3,979 in stock; the sellers' links on this page open their listings.

What can replace the TPS22917DBV?

Parts like it in the library: the TPS22918DBV by Texas Instruments, the TPS2553DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated and the TPS27081ADDC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS22917DBV?

75 boards in 62 repositories on GitHub; the most starred are listed on this page, with their KiCad files.