
Audio
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
Motherboard is an open-source printed circuit board by byrantech, from the byrantech/laptop repository on GitHub, published under the MIT licence. It is a 6-layer board of 133 × 92 mm with 264 parts on 475 nets, routed with 3,844 tracks and 734 vias.
It is built around the FUSB302BUCX, SY6280AAC and TVS2200DRV, with the CH334F, PI6C557-05BLE and RT9193-18GB among its other parts. Its parts include 89 capacitors, 89 resistors, 27 ICs, 22 connectors and 7 diodes. It belongs with the computers and single-board computers and keyboards and input boards of this library.
BLDC haptic feedback like smartknob.
NOTE:
Never completed :(
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C10, C15, C16, C27, C28, C30, C36, C37, C39, C42, C52, C60, C65, C67 +5 |
| 18 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R6, R12, R13, R16, R34, R38, R44, R45, R46, R52, R56, R57, R67, R68 +2 |
| 17 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C22, C48, C49, C50, C53, C54, C55, C56, C57, C62, C75, C77, C79, C83 +1 |
| 15 | 33R | Resistor_SMD:R_0402_1005Metric | R47, R58, R59, R60, R62, R70, R72, R75, R76, R80, R81, R82, R83, R84, R85 |
| 11 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C23, C47, C51, C58, C59, C61, C66, C68, C70, C72, C76 |
| 10 | 0R | Resistor_SMD:R_0402_1005Metric | R17, R18, R20, R27, R53, R54, R55, R61, R63, R87 |
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5, C8, C11, C14, C17, C20, C29, C38, C78, C80 |
| 9 | 22uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C12, C13, C18, C19, C21, C73, C74 |
| 9 | TPD4E02B04 | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U8, U9, U10, U14, U15, U16, U22, U23, U26 |
| 6 | 100R | Resistor_SMD:R_0402_1005Metric | R39, R40, R41, R42, R43, R71 |
| 6 | 10uF (C913517) | Capacitor_SMD:C_0603_1608Metric | C25, C26, C34, C35, C88, C89 |
| 6 | 2.2k | Resistor_SMD:R_0402_1005Metric | R19, R25, R26, R32, R33, R50 |
| 6 | 49.9R | Resistor_SMD:R_0402_1005Metric | R64, R65, R73, R74, R77, R78 |
| 6 | 6.8k | Resistor_SMD:R_0402_1005Metric | R22, R23, R29, R30, R89, R90 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R21, R28, R51, R88 |
| 4 | 15pF | Capacitor_SMD:C_0402_1005Metric | C63, C64, C81, C82 |
| 4 | 1nF | Capacitor_SMD:C_0402_1005Metric | C43, C44, C45, C46 |
| 4 | 220pF | Capacitor_SMD:C_0402_1005Metric | C31, C32, C40, C41 |
| 4 | Hirose | Library:Blank | H1, H3, H5, H7 |
| 4 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H2, H4, H6, H8 |
| 4 | USB | 6P_05mm_FPC:FPC-SMD_6P-P0.50_XUNPU_FPC-05F-6PH20 | J19, J20, J21, J22 |
| 3 | 100nF (+25V) | Capacitor_SMD:C_0402_1005Metric | C24, C33, C87 |
| 3 | 1M | Resistor_SMD:R_0402_1005Metric | R24, R31, R86 |
| 3 | 33k | Resistor_SMD:R_0402_1005Metric | R3, R11, R79 |
| 3 | ACM2012 | ACM2012:FIL_ACM2012-900-2P-T001 | CMC1, CMC2, CMC3 |
| 3 | EXT GPIO | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J6, J7 |
| 3 | SY6280AAC | Package_TO_SOT_SMD:SOT-23-5 | U6, U12, U24 |
| 3 | TPS564257DRLR | TPS564257:SOT50P160X60-6N | U2, U3, U4 |
| 3 | TVS2200DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U5, U11, U25 |
| 2 | 2SK3018W | Package_TO_SOT_SMD:SOT-323_SC-70 | Q2, Q3 |
| 2 | 470R | Resistor_SMD:R_0402_1005Metric | R36, R69 |
| 2 | 49.9k | Resistor_SMD:R_0402_1005Metric | R4, R14 |
| 2 | 510k | Resistor_SMD:R_0402_1005Metric | R5, R15 |
| 2 | FUSB302BUCX | FUSB302BUCX:WLCSP9_1P2X1P2_ONS | U7, U13 |
| 2 | LESD8D5.0CB1T5G | Diode_SMD:D_SOD-882 | D6, D7 |
| 2 | MWSA0603S-3R3MT | Inductor_SMD:L_Sunlord_MWSA0603S | L1, L3 |
| 1 | +3.3V LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | +5V LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | 0R | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | R48 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R37 |
| 1 | 2.2R | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 20455-040E-76 OLED IPEX | eDP_Connector:IPEX_20455-040E-76 | J15 |
| 1 | 220k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 330k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R66 |
| 1 | 5V FAN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | AO3415A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AP2127K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U21 |
| 1 | BATTERY IN | Connector_Molex:Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal | J4 |
| 1 | Bus_M.2_Socket_E | WIRELESS_E_KEY:CONN-SMD_APCI0147-P001A | J8 |
| 1 | Bus_M.2_Socket_M | NVME_M_KEY:CONN-SMD_AS0BC21-S30BM-7H | J23 |
| 1 | CH334F | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U20 |
| 1 | CM3588 Hirose Connector | Library:CM3588 | J1 |
| 1 | DEBUG UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | FXL0630-4R7-M | Inductor_SMD:L_Sunlord_MWSA0603S | L2 |
| 1 | GZ1608D601TF | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | HALL SWITCH | 6P_05mm_FPC:FPC-SMD_6P-P0.50_XUNPU_FPC-05F-6PH20 | J12 |
| 1 | HPD | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | LEFT SPEAKERS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J17 |
| 1 | LRB521S-30T1G | Diode_SMD:D_SOD-523 | D5 |
| 1 | MASK | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW3 |
| 1 | Micro_SD_Card_Det1 | microSD_Card:TF-SMD_TF-CARD-H1.8 | J24 |
| 1 | Outer USB-C | USB-C:USB-C-SMD_TYPE-C-24P-QT | J9 |
| 1 | PCIE LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | PI6C LED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | PI6C557-05BLE | SOP65P640X120-20N:SOP65P640X120-20N | IC1 |
| 1 | PJ-332A-6A (3.5mm Jack) | Headphone_Jack:AUDIO-SMD_PJ-332A-6A | CN1 |
| 1 | PWR | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | PWRON | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1 |
| 1 | RECOVERY | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW4 |
| 1 | RESET | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | RIGHT SPEAKERS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J18 |
| 1 | RT9193-18GB | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | SPI Flash | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U17 |
| 1 | SYSTEM | 6P_05mm_FPC:FPC-SMD_6P-P0.50_XUNPU_FPC-05F-6PH20 | J13 |
| 1 | TPA2016D2RTJR | TPA2016:QFN50P400X400X80-21N | U19 |
| 1 | TPS22917DBV | Package_TO_SOT_SMD:SOT-23-6 | U18 |
| 1 | USB-231-ARY | USB_A:USB-A-TH_USB-231-ARY | J25 |
The 260 most common of 264 parts.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


johnb302/cmu-embedded
Repo for distributed embedded systems at CMU, 18-449





Ains0X1/UART-Wand
It is an open-source, ultra-compact USB-to-Serial converter. It uses the CH340E IC to provide a stable asynchronous serial interface (UART) via a USB-C connector.

saikhamhein/benchswitch-usb-dut-hub
BenchSwitch USB DUT Hub: a four-port USB 2.0 hardware development prototype with KiCad design sources, BOM, manufacturing files, and bring-up documentation.
It measures 133 × 92 mm and has 6 copper layers, 1.6 mm thick.
264 parts, built around the FUSB302BUCX, SY6280AAC, TVS2200DRV and CH334F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the byrantech/laptop repository on GitHub, at the commit this page was made from: the board is motherboard/motherboard.kicad_pcb and its schematic audio/audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).