Skip to the content
123456

TPS27081ADDC

Texas InstrumentsExtended

-40℃~+85℃ 1 1.2V~8V 32mΩ 3A Active Low High Side Switch Soft-start SOT-23-6 Power Distribution Switches ROHS

Part id
ti/TPS27081ADDC
Category
Power Distribution Switches
Package
SOT-23-6
Pins
6
In stock
21,818 at JLCPCB (C128404)
Used on
2 open-source boards

Overview

The TPS27081ADDC is a power Distribution Switche made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+85℃ 1 1.2V~8V 32mΩ 3A Active Low High Side Switch Soft-start SOT-23-6 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (dk_PMIC-Power-Distribution-Switches-Load-Drivers:TPS27081ADDCR, from Digikey) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 21,818 are in stock at JLCPCB (part C128404). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1R22VOUT3VOUT4VIN5ON/OFF6R1/C1
dk_PMIC-Power-Distribution-Switches-Load-Drivers:TPS27081ADDCRFrom Digikey

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

11
Supply, least
1 V · VIN, recommended operating min · p. 4
Supply, most
8 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
8 V · VIN, absolute max relative to R2 · p. 3
Works from
-40 °C · Operating free-air ambient temperature min · p. 4
Works up to
85 °C · Operating free-air ambient temperature max · p. 4
Junction, hottest
150 °C · Operating virtual junction temperature absolute max · p. 3
Gives
3 A · Continuous Q1 drain current max at TJ = 105°C · p. 3
Takes asleep
150 nA · VIN total leakage typical, VIN = 8 V, OFF, RR1 = 10 kΩ, TJ = 25°C · p. 5
Junction to air (DDC (SOT))
105 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DDC (SOT))
43 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (DDC (SOT))
17.8 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

4
Switch architecture
Integrated power PFET and control NMOS · p. 1
Slew rate control
Adjustable turnon and turnoff · p. 1
ESD protection
All pins; HBM 2 kV, CDM 500 V · p. 1
Package
6-pin SOT (DDC) · p. 1

Specifications

45
ParameterConditionsAs printedPage
VIN pin maximum voltage with reference to pin R2 VIN(max)TJ = –40°C to 105°Cmin -0.1 · max 8 V3
VOUT pin maximum voltage with reference to pin R2 VOUT(max)TJ = –40°C to 105°Cmin -0.1 · max 8 V3
ON/OFF in maximum voltage with respect to pin R2 VON/OFFTJ = –40°C to 105°Cmin -0.3 · max 8 V3
Maximum continuous drain current of Q1 at TJ = 105°C IQ1(on)TJ = 105°Cmax 3 A3
Maximum pulsed drain current of Q1 IQ1(on)TJ = 105°C; pulse width <300 us, duty cycle < 2%max 9.5 A3
Maximum power dissipation at TA = 25°C, TJ = 150°C, RθJA = 105°C/W PDTA = 25°C, TJ = 150°C, RθJA = 105°C/Wmax 1190 mW3
Operating free-air ambient temperature TATJ(max) limits and other related conditions applymin -40 · max 85 °C3
Operating virtual junction temperature TJ(max)max 150 °C3
Storage temperature Tstgmin -65 · max 150 °C3
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ± ratingmax 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ± ratingmax 500 V4
Input voltage VINOver operating free-air temperature rangemin 1 · max 8 V4
Operating free-air ambient temperature TAmin -40 · max 85 °C4
Junction temperature TJmin -40 · max 105 °C4
Junction-to-ambient thermal resistance RθJATPS27081A, DDC (SOT), 6 PINStyp 105 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS27081A, DDC (SOT), 6 PINStyp 43 °C/W4
Junction-to-board thermal resistance RθJBTPS27081A, DDC (SOT), 6 PINStyp 17.8 °C/W4
Junction-to-top characterization parameter ψJTTPS27081A, DDC (SOT), 6 PINStyp 6.5 °C/W4
Junction-to-board characterization parameter ψJBTPS27081A, DDC (SOT), 6 PINStyp 16.2 °C/W4
Q1 drain-to-source breakdown voltage BVIN1VON/OFF = 0 V, VGS(Q1) = 0 V, ID(Q1) = 250 uAmin -8 V5
VIN pin total leakage current ILOADVIN = 8 V, VON/OFF = 0 V, RR1 = 10 kΩ, TJ = 25°Ctyp 0.15 · max 0.75 uA5
VIN pin total leakage current ILOADVIN = 8 V, VON/OFF = 0 V, RR1 = 10 kΩ, TJ = 85°C; specified by designtyp 5 · max 20 uA5
VIN pin total leakage current ILOADVIN = 5 V, VON/OFF = 0 V, RR1 = 10 kΩ, TJ = 25°Ctyp 0.05 uA5
VIN pin total leakage current ILOADVIN = 5 V, VON/OFF = 0 V, RR1 = 10 kΩ, TJ = 85°C; specified by designtyp 2 uA5
Q2 drain-to-source leakage current IFQ2VIN = 8 V, VON/OFF = 0 V, TJ = 25°Ctyp 0.03 · max 0.05 uA5
Q2 drain-to-source leakage current IFQ2VIN = 8 V, VON/OFF = 0 V, TJ = 85°C; specified by designtyp 0.35 · max 0.6 uA5
Q2 drain-to-source leakage current IFQ2VIN = 5 V, VON/OFF = 0 V, TJ = 25°Ctyp 0.025 uA5
Q2 drain-to-source leakage current IFQ2VIN = 5 V, VON/OFF = 0 V, TJ = 85°C; specified by designtyp 0.25 uA5
ON/OFF pin low-level input voltage VILVIN = 5 V, ID(Q1) < 2 uA, RR1 = 10 kΩ, RR2 = RL = 0 Ω, TJ = 25°Cmax 0.3 V5
ON/OFF pin low-level input voltage VILVIN = 5 V, ID(Q1) < 20 uA, RR1 = 10 kΩ, RR2 = RL = 0 Ω, TJ = 85°C; specified by designmax 0.2 V5
ON/OFF pin high-level input voltage VIHVIN = 5 V, RR1 = 10 kΩmin 1 V5
Q1 Channel ON-resistance RQ1(on)VGS = –4.5 V, ID(Q1) = 3 A; pulse width < 300 us, duty cycle < 2.0%typ 32 · max 55 mΩ5
Q1 Channel ON-resistance RQ1(on)VGS = –3 V, ID(Q1) = 2.5 A; pulse width < 300 us, duty cycle < 2.0%typ 44 · max 77 mΩ5
Q1 Channel ON-resistance RQ1(on)VGS = –2.5 V, ID(Q1) = 2.5 A; pulse width < 300 us, duty cycle < 2.0%typ 50 · max 85 mΩ5
Q1 Channel ON-resistance RQ1(on)VGS = –1.8 V, ID(Q1) = 2 A; pulse width < 300 us, duty cycle < 2.0%typ 82 · max 147 mΩ5
Q1 Channel ON-resistance RQ1(on)VGS = –1.5 V, ID(Q1) = 1 A; pulse width < 300 us, duty cycle < 2.0%typ 93 · max 166 mΩ5
Q1 Channel ON-resistance RQ1(on)VGS = –1.2 V, ID(Q1) = 0.5 A; pulse width < 300 us, duty cycle < 2.0%typ 155 · max 260 mΩ5
Q2 Channel ON-resistance RQ2(on)VGS = 4.5 V, ID(Q2) = 0.4 A; pulse width < 300 us, duty cycle < 2.0%typ 1.8 · max 3 Ω5
Q2 Channel ON-resistance RQ2(on)VGS = 3.0 V, ID(Q2) = 0.3 A; pulse width < 300 us, duty cycle < 2.0%typ 2.3 · max 6.2 Ω5
Q2 Channel ON-resistance RQ2(on)VGS = 2.5 V, ID(Q2) = 0.2 A; pulse width < 300 us, duty cycle < 2.0%typ 2.6 · max 6.1 Ω5
Q2 Channel ON-resistance RQ2(on)VGS = 1.8 V, ID(Q2) = 0.1 A; pulse width < 300 us, duty cycle < 2.0%typ 3.8 · max 10 Ω5
Q2 Channel ON-resistance RQ2(on)VGS = 1.5 V, ID(Q2) = 0.05 A; pulse width < 300 us, duty cycle < 2.0%typ 4.4 · max 8.5 Ω5
Q2 Channel ON-resistance RQ2(on)VGS = 1.2 V, ID(Q2) = 0.03 A; pulse width < 300 us, duty cycle < 2.0%typ 6.25 · max 13.5 Ω5
Source-drain diode peak forward current IFSDVFSD = 0.8 V, VON/OFF = 0 V; pulse width < 300 us, duty cycle < 2.0%; not rated for continuous current operationtyp 1 A5
Source-drain diode forward voltage VFSDVON/OFF = 0 V, IFSD = –0.6 A; pulse width < 300 us, duty cycle < 2.0%; not rated for continuous current operationmax 1 V5

Pins, by the datasheet

6
1 R2
Source terminal of NMOS Q2; connect to system GND directly or through a slew rate control resistor. · p. 3
2 VOUT
Drain terminal of power PFET Q1; connect a slew control capacitor between VOUT and R1/C1. · p. 3
3 VOUT
Drain terminal of power PFET Q1; connect a slew control capacitor between VOUT and R1/C1. · p. 3
4 VIN
Source terminal of power PFET Q1; connect a pull-up resistor between VIN and R1/C1. · p. 3
5 ON/OFF
Active high enable; connect an external pull down resistor to GND when driven with a high-impedance driver. · p. 3
6 R1/C1
Gate terminal of power PFET Q1. · p. 3

Ordering codes, by the datasheet

3
TPS27081ADDCR
SOT-23-THIN (DDC), 6 pins · 3000 units, LARGE T&R; operating temperature -40 to 85°C · p. 20
TPS27081ADDCR.A
SOT-23-THIN (DDC), 6 pins · 3000 units, LARGE T&R; operating temperature -40 to 85°C; no electrical difference stated · p. 20
TPS27081ADDCR.B
SOT-23-THIN (DDC), 6 pins · 3000 units, LARGE T&R; operating temperature -40 to 85°C; no electrical difference stated · p. 20

Open-source boards using it

2
  • 2 layers57 × 57 mmSensor node, the printed circuit board in 3D

    Sensor node

    henriheimann/prosper3-monitor

    Repository of the Prosper III Environment Monitor project ☀️🌱

    52 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS27081ADDC?

Yes. The symbol is dk_PMIC-Power-Distribution-Switches-Load-Drivers:TPS27081ADDCR and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS27081ADDC?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TPS27081ADDC datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS27081ADDC?

JLCPCB lists it as part C128404, with 21,818 in stock; the sellers' links on this page open their listings.

What can replace the TPS27081ADDC?

Parts like it in the library: the TPS22918DBV by Texas Instruments, the TPS2553DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated and the AP22653W6 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS27081ADDC?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.