Skip to the content
123456

AP22653W6

Diodes IncorporatedExtended

-40℃~+85℃ 1 2.1A 3V~5.5V 65mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-26 Power Distribution Switches ROHS

Part id
diodes/AP22653W6
Category
Power Distribution Switches
Package
SOT-26
Pins
6
In stock
11,195 at JLCPCB (C2158037)
Used on
40 open-source boards

Overview

The AP22653W6 is a power Distribution Switche made by Diodes Incorporated in a SOT-26 package with 6 pins. -40℃~+85℃ 1 2.1A 3V~5.5V 65mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Over Voltage Protection、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-26 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:AP2552AW6-7, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 11,195 are in stock at JLCPCB (part C2158037). 40 open-source boards in 36 repositories on GitHub use it.

Symbol

1IN2GND3EN/EN#4FAULT#5ILIM6OUT
EasyEDA_Cloud:AP2552AW6-7From EasyEDA

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

12
Supply, least
3 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute maximum · p. 4
Works from
-40 °C · Operating ambient temperature min · p. 4
Works up to
85 °C · Operating ambient temperature max · p. 4
Junction, hottest
150 °C · Junction temperature absolute max · p. 4
Takes working
140 µA · IN quiescent typical, enabled, VIN = 5.5V, OUT open, RLIM = 20kΩ · p. 5
Takes asleep
100 nA · IN shutdown typical, VIN = 5.5V, disabled, OUT open · p. 5
Gives
2.1 A · Continuous output current max, -40°C to +85°C · p. 4
Current limit
2.665 A · Current-limit threshold typical, RLIM = 10kΩ, TA = +25°C, VIN = 5V, VOUT = 4.5V · p. 5
Junction to air (SOT26 (Type A1))
120 K/W · Junction to ambient, High-K board · p. 4
Junction to case (SOT26 (Type A1))
35 K/W · Junction to case, High-K board · p. 4

What it is and has

12
Maximum load current
2.1A · p. 1
Adjustable current limit
125mA to 2665mA · p. 1
Current-limit accuracy
±7% at 1.735A with RLIM = 15kΩ · p. 1
Overcurrent behavior
Constant-current · p. 1
Short-circuit response time
5µs typical · p. 1
Soft-start
0.5ms typical rise time · p. 1
Protection
Overcurrent and thermal protection · p. 1
Fault reporting
FAULT with blanking time · p. 1
ESD protection
2kV HBM, 500V CDM · p. 1
UL recognition
File Number E322375, Vol. 1 · p. 1
Certification
IEC60950-1 CB Scheme · p. 1
Enable polarity
Active-high · p. 1

Around it

9
cap 0.1 µF minimum
between IN and GND; Ceramic; place as close to the IC as possible. · p. 2
cap 0.1μF
between OUT and GND; Bypass capacitor close to the IC. · p. 2
cap 10μF minimum
between OUT and GND; High-value capacitor close to the IC for USB applications. · p. 2
cap 120µF
between OUT and GND; Output capacitance required for USB. · p. 2
res 10kΩ to 210kΩ
between ILIM and GND; 1% current-limit programming resistor; keep traces short. · p. 10
cap 0.01μF to 0.1μF
between IN and GND; X7R or X5R ceramic bypass capacitor close to the device. · p. 11
cap 10μF minimum
between IN and GND; High-value electrolytic capacitor recommended for heavy output loads. · p. 11
cap 120µF
between OUT and GND; High-value electrolytic capacitor recommended for heavy output loads. · p. 11
cap 0.1μF to 4.7μF
between OUT and GND; Ceramic capacitor improves immunity to short-circuit transients and prevents negative output during turn-off. · p. 11

Specifications

64
ParameterConditionsAs printedPage
Human Body Model ESD Protection HBMTA = +25°Cmax 2 kV4
Charged Device Model ESD Protection CDMTA = +25°Cmax 500 V4
Surges per IEC61000-4-2. 1999 Applied to Output Terminals of EVM (Note 6) IEC System LevelExternal output capacitors; pass test only, not a limitmax 15 kV4
Voltage on IN, OUT, FAULT , ILIM, EN, EN VIN, VOUT, VFAULT, VILIM, VENTA = +25°Cmin -0.3 · max 6 V4
Continuous FAULT Sink CurrentTA = +25°Cmax 25 mA4
ILIM Source CurrentTA = +25°Cmax 1 mA4
Maximum Junction Temperature TJ(MAX)min -40 · max 150 °C4
Storage Temperature Range (Note 5) TSTGmin -65 · max 150 °C4
Thermal Resistance θJA θJASOT26 (Type A1), High-K (Note 7)typ 120 °C/W4
Thermal Resistance θJC θJCSOT26 (Type A1), High-K (Note 7)typ 35 °C/W4
Power RatingSOT26 (Type A1), High-K (Note 7), TA ≤ +25°Cmax 830 mW4
Derating Factor Above TA = +25°CSOT26 (Type A1), High-K (Note 7)typ 8.3 mW/°C4
Power RatingSOT26 (Type A1), High-K (Note 7), TA = +70°Cmax 450 mW4
Power RatingSOT26 (Type A1), High-K (Note 7), TA = +85°Cmax 330 mW4
Input Voltage VINTA = +25°Cmin 3 · max 5.5 V4
Continuous Output Current (-40°C ≤ TA ≤ +85°C) IOUT-40°C ≤ TA ≤ +85°Cmin 0 · max 2.1 A4
Enable Voltage VENTA = +25°Cmin 0 · max 5.5 V4
High-Level Input Voltage on EN or EN VIHMaximum VIN; TA = +25°Cmin 1.5 V4
Low-Level Input Voltage on EN or EN VILTA = +25°Cmin 0 · max 0.4 V4
Current-Limit Threshold Resistor Range (1% Initial Tolerance) RLIM1% Initial Tolerancemin 10 · max 210 kΩ4
Continuous FAULT Sink Current IOTA = +25°Cmin 0 · max 10 mA4
Input De-Coupling Capacitance, IN to GNDmin 0.1 uF4
Operating Ambient Temperature TAmin -40 · max 85 °C4
Operating Junction Temperature TJmin -40 · max 125 °C4
Input UVLO VUVLOVIN Risingtyp 2.65 · max 2.95 V5
Input UVLO Hysteresis VUVLOVIN Decreasingtyp 65 mV5
Input Shutdown Current ISHDNVIN = 5.5V, Disabled, OUT = Opentyp 0.1 · max 1 uA5
Input Quiescent Current IQVIN = 5.5V, Enabled, OUT = Open, RLIM = 20kΩtyp 140 · max 160 uA5
Input Quiescent Current IQVIN = 5.5V, Enabled, OUT = Open, RLIM = 210kΩtyp 120 · max 140 uA5
Reverse Leakage Current IREVDisabled, VIN = 0V, VOUT = 5.5V, IREV at VINtyp 0.01 · max 1 uA5
Switch On-Resistance RDS(ON)SOT26 (Type A1) Package; TJ = +25°C, VIN = 5.0Vtyp 65 · max 90 mΩ5
Switch On-Resistance RDS(ON)SOT26 (Type A1) Package; -40°C ≤ TA ≤ +85°Cmax 135 mΩ5
Output Turn-On Rise Time tRVIN = 5.5V, CL = 1uF, RLOAD = 100Ω. See Figure 1typ 0.5 · max 1.5 ms5
Output Turn-On Rise Time tRVIN = 3.0V, CL = 1uF, RLOAD = 100Ωtyp 0.3 · max 1 ms5
Output Turn-Off Fall Time tFVIN = 5.5V, CL = 1uF, RLOAD = 100Ω. See Figure 1min 0.1 · max 0.5 ms5
Output Turn-Off Fall Time tFVIN = 3.0V, CL = 1uF, RLOAD = 100Ωmin 0.1 · max 0.5 ms5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 10kΩ, TA = +25°Cmin 2478 · typ 2665 · max 2852 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 10kΩ, -40°C ≤ TA ≤ +85°Cmin 2398 · typ 2665 · max 2931 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 15kΩ, TA = +25°Cmin 1614 · typ 1735 · max 1856 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 15kΩ, -40°C ≤ TA ≤ +85°Cmin 1561 · typ 1735 · max 1908 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 20kΩ, TA = +25°Cmin 1196 · typ 1286 · max 1376 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 20kΩ, -40°C ≤ TA ≤ +85°Cmin 1157 · typ 1286 · max 1414 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 49.9kΩ, TA = +25°Cmin 456 · typ 490 · max 524 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 49.9kΩ, -40°C ≤ TA ≤ +85°Cmin 441 · typ 490 · max 539 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM = 210kΩ, TA = +25°Cmin 95 · typ 125 · max 155 mA5
Current-Limit Threshold (Maximum DC Output Current), VIN = 5V, VOUT = 4.5V ILIMITRLIM Shorted to GNDmin 40 · typ 80 · max 120 mA5
Short-Circuit Current Limit, OUT Connected to GND ISHORTRLIM = 10kΩ, TA = +25°Ctyp 700 mA5
Short-Circuit Current Limit, OUT Connected to GND ISHORTRLIM = 15kΩ, TA = +25°Ctyp 470 mA5
Short-Circuit Current Limit, OUT Connected to GND ISHORTRLIM = 20kΩ, TA = +25°Ctyp 350 mA5
Short-Circuit Current Limit, OUT Connected to GND ISHORTRLIM = 49.9kΩ, TA = +25°Ctyp 140 mA5
Short-Circuit Current Limit, OUT Connected to GND ISHORTRLIM = 210kΩ, TA = +25°Ctyp 35 mA5
Short-Circuit Current Limit, OUT Connected to GND ISHORTRLIM Shorted to GND, TA = +25°Ctyp 80 mA5
EN Input Leakage Current ILEAK-ENVIN = 5V, VEN = 0V and 5.5Vmin -2 · max 2 uA5
Turn-On Time tONCL = 1uF, RL = 100Ω. See Figure 1max 4 ms5
Turn-Off Time tOFFCL = 1uF, RL = 100Ω. See Figure 1max 1 ms5
Discharge Resistance (Note 9) RDISVIN = 5V, Disabled, IOUT = 1mAtyp 600 Ω5
Reverse-Voltage Comparator Trip Point VRVPVOUT - VINtyp 65 mV6
Reverse Current Limit IROCPVOUT - VIN = 150mVtyp 0.32 A6
Time from Reverse-Voltage Condition to MOSFET Turn Off tTRIGVIN = 5Vmin 2 · typ 6 · max 20 ms6
FAULT Output Low Voltage VOLIFAULT = 1mAmax 180 mV6
FAULT Off Current IFOHVFAULT = 5.5Vmax 1 uA6
FAULT Blanking Time tBLANKAssertion or deassertion due to overcurrent and overtemperature conditionmin 2 · typ 6 · max 20 ms6
Thermal Shutdown Threshold TSHDNEnabledtyp 145 °C6
Thermal Shutdown Hysteresis THYSOnly for AP22652 and AP22653typ 40 °C6

Pins, by the datasheet

6
1 IN
Input; connect a 0.1uF or greater ceramic capacitor to GND as close to the IC as possible. · p. 2
2 GND
Ground. · p. 2
3 EN
Enable input; logic high turns on the power switch. · p. 2
4 FAULT
Active-low output asserted during overcurrent, overtemperature, or reverse-voltage conditions. · p. 2
5 ILIM
Use an external resistor to set the current-limit threshold; recommended resistance is 10kΩ to 210kΩ. · p. 2
6 OUT
Voltage output; connect a 0.1uF bypass capacitor and a high-value capacitor to GND close to the IC, at least 10uF in USB applications. · p. 2

Open-source boards using it

40See all 40
  • 6 layers54.6 × 57.1 mmCM5 MINIMA 2, the printed circuit board in 3D

    CM5 MINIMA 2

    piecol/CM5_MINIMA_REV2

    Compact, feature-filled CM5 carrier board

    102 parts170CERN-OHL-S-2.0
  • 4 layers54.6 × 57.1 mmCM5 MINIMA, the printed circuit board in 3D

    CM5 MINIMA

    piecol/CM5_MINIMA_REV1

    CM5 LoRaWAN carrier board in a compact, feature-filled footprint

    98 parts63CERN-OHL-S-2.0
  • 4 layers170 × 170 mmCM5IO, the printed circuit board in 3D

    CM5IO

    sanctuary-systems-com/rpi-cm5io-mini-itx

    A mini ITX board with PCIe x16 based on the Raspberry Pi Comput Module 5 IO board

    75 parts29CERN-OHL-P-2.0
  • 4 layers110 × 100 mmBitcart, the printed circuit board in 3D

    Bitcart

    skot/bitcart

    Raspberry Pi CM4 based antminer control board

    134 parts23
  • 6 layers125 × 125 mmLibreboard broken, the printed circuit board in 3D

    Libreboard broken

    256foundation/libreboard

    Open Source Bitcoin Mining Control Board

    193 parts21CERN-OHL-S-2.0
  • 4 layers80 × 70 mmCM4IOv5, the printed circuit board in 3D

    CM4IOv5

    vega-d/CM4-nano-carrierboard

    A simplified carrier board for RPI CM4 module featuring reduced footprint.

    66 parts11GPL-3.0
  • 6 layers46.5 × 47.2 mmNAVCORE SoOP, the printed circuit board in 3D

    NAVCORE SoOP

    kfilipekk/iridium_drone

    STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler

    217 parts2MIT
  • 6 layers100 × 220 mmSrvant mk2, the printed circuit board in 3D

    Srvant mk2

    lwolf/srvant-board

    [WIP] Carrier board for the CM4 with BMC

    276 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP22653W6?

Yes. The symbol is EasyEDA_Cloud:AP2552AW6-7 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP22653W6?

SOT-26, with 6 pins. Its footprint is drawn on this page.

Where is the AP22653W6 datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP22653W6?

JLCPCB lists it as part C2158037, with 11,195 in stock; the sellers' links on this page open their listings.

What can replace the AP22653W6?

Parts like it in the library: the TPS22918DBV by Texas Instruments, the TPS2553DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated and the TPS27081ADDC by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP22653W6?

40 boards in 36 repositories on GitHub; the most starred are listed on this page, with their KiCad files.