Skip to the content
123456

TPS2553DBV

Texas InstrumentsExtended

-40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active High High Side Switch 过压保护、软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection SOT-23-6 Power Distribution Switches ROHS

Part id
ti/TPS2553DBV
Category
Power Distribution Switches
Package
SOT-23-6
Pins
6
In stock
59,131 at JLCPCB (C55266)
Used on
9 open-source boards

Overview

The TPS2553DBV is a power Distribution Switche made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+150℃ 1 1.5A 2.5V~6.5V 85mΩ Active High High Side Switch 过压保护、软启动、欠压锁定、反向电压保护、集成电荷泵、Overcurrent Protection、Over temperature protection、锁存保护、Short-Circuit Protection SOT-23-6 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TPS2553DBVR, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 59,131 are in stock at JLCPCB (part C55266). 9 open-source boards in 8 repositories on GitHub use it.

Symbol

1IN2GND3EN4/FAULT5ILIM6OUT
EasyEDA_Cloud:TPS2553DBVRFrom EasyEDA

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

18
Supply, least
2.5 V · IN, recommended operating min · p. 5
Supply, most
6.5 V · IN, recommended operating max · p. 5
Supply, absolute maximum
7 V · IN, absolute maximum · p. 5
Junction, hottest
150 °C · Junction temperature absolute maximum · p. 5
Takes working
120 µA · IN typical, output enabled, VIN = 6.5V, no load, RILIM = 20kΩ · p. 7
Takes at most
150 µA · IN max, output enabled, VIN = 6.5V, no load, RILIM = 20kΩ · p. 7
Takes asleep
100 nA · IN typical, output disabled, VIN = 6.5V, no load · p. 7
Gives
1.2 A · OUT continuous max, -40°C ≤ TJ ≤ 125°C · p. 5
Gives
1.5 A · OUT continuous max, -40°C ≤ TJ ≤ 105°C · p. 5
Current limit
1.7 A · Typical, RILIM = 15kΩ, –40°C ≤ TJ ≤105°C · p. 7
Current limit
1.295 A · Typical, RILIM = 20kΩ, TJ = 25°C · p. 7
Current limit
520 mA · Typical, RILIM = 49.9kΩ, TJ = 25°C · p. 7
Current limit
130 mA · Typical, RILIM = 210kΩ · p. 7
Current limit
75 mA · Typical, ILIM shorted to IN · p. 7
Junction to air (DBV (SOT-23))
182.6 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to board (DBV (SOT-23))
29.4 K/W · Junction-to-board thermal resistance · p. 6
Junction to case (DBV (SOT-23))
122.2 K/W · Junction-to-case top thermal resistance · p. 6
Edge
700 µs · Output rise time typical, VIN = 2.5V, CL = 1uF, RL = 100Ω · p. 6

What it is and has

11
Maximum load current
1.5A · p. 1
Current-limit accuracy
±6% at 1.7A (Typical) · p. 1
USB current limiting
Meets USB current-limiting requirements · p. 1
Overcurrent response
2µs (Typical) · p. 1
High-side MOSFET
85mΩ, DBV package · p. 1
Protection
Reverse input-output voltage protection · p. 1
Soft start
Built-in · p. 1
Overcurrent behavior
Constant-current mode · p. 14
Enable polarity
Active high · p. 4
Safety certification
UL listed, File No. E169910 · p. 1
Safety certification
NEMKO IEC60950-1-am1 ed2.0 · p. 1

Around it

2
cap 0.1µF or greater
between IN and GND; Ceramic; place as close to the IC as possible. · p. 4
res 15kΩ to 232kΩ
between ILIM and GND; Current-limit threshold resistor; nominal 1% tolerance. · p. 5

Specifications

59
ParameterConditionsAs printedPage
Voltage range on IN, OUT, EN or EN, ILIM, FAULTOver operating free-air temperature range; referenced to GNDmin -0.3 · max 7 V5
Voltage range from IN to OUTOver operating free-air temperature rangemin -7 · max 7 V5
Continuous FAULT sink currentOver operating free-air temperature rangemin 0 · max 25 mA5
ILIM source currentOver operating free-air temperature rangemin 0 · max 1 mA5
Maximum junction temperature TJmin -40 · max 150 °C5
Storage temperature Tstgmin -65 · max 150 °C5
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; ± polaritymax 2000 V5
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101; ± polaritymax 500 V5
Electrostatic discharge V(ESD)IEC 61000-4-2 contact discharge; output terminals of EVM; passing test level; ± polaritymax 8000 V5
Electrostatic discharge V(ESD)IEC 61000-4-2 air-gap discharge; output terminals of EVM; passing test level; ± polaritymax 15000 V5
Input voltage, IN VINOver operating free-air temperature rangemin 2.5 · max 6.5 V5
Enable voltage VENTPS2553/53-1min 0 · max 6.5 V5
High-level input voltage on EN or EN VIHmin 1.1 V5
Low-level input voltage on EN or EN VILmax 0.66 V5
Continuous output current, OUT IOUT-40°C ≤ TJ ≤ 125°Cmax 1.2 A5
Continuous output current, OUT IOUT-40°C ≤ TJ ≤ 105°Cmax 1.5 A5
Current-limit threshold resistor range (nominal 1%) from ILIM to GND RILIMmin 15 · max 232 kΩ5
Continuous FAULT sink current IOmin 0 · max 10 mA5
Input de-coupling capacitance, IN to GNDmin 0.1 uF5
Operating virtual junction temperature TJIOUT ≤ 1.2Amin -40 · max 125 °C6
Operating virtual junction temperature TJIOUT ≤ 1.5Amin -40 · max 105 °C6
Junction-to-ambient thermal resistance RθJATPS2553, DBV (SOT-23), 6 PINStyp 182.6 °C/W6
Junction-to-case (top) thermal resistance RθJC(top)TPS2553, DBV (SOT-23), 6 PINStyp 122.2 °C/W6
Junction-to-board thermal resistance RθJBTPS2553, DBV (SOT-23), 6 PINStyp 29.4 °C/W6
Junction-to-top characterization parameter ψJTTPS2553, DBV (SOT-23), 6 PINStyp 20.8 °C/W6
Junction-to-board characterization parameter ψJBTPS2553, DBV (SOT-23), 6 PINStyp 28.9 °C/W6
Static drain-source on-state resistance rDS(on)DBV package, TJ = 25°Ctyp 85 · max 95 mΩ6
Static drain-source on-state resistance rDS(on)DBV package, –40°C ≤ TJ ≤125°Cmax 135 mΩ6
Rise time, output trCL = 1uF, RL = 100Ω, VIN = 6.5V; see Figure 7-2typ 1.1 · max 1.5 ms6
Rise time, output trCL = 1uF, RL = 100Ω, VIN = 2.5V; see Figure 7-2typ 0.7 · max 1 ms6
Fall time, output tfCL = 1uF, RL = 100Ω, VIN = 6.5V; see Figure 7-2min 0.2 · max 0.5 ms6
Fall time, output tfCL = 1uF, RL = 100Ω, VIN = 2.5V; see Figure 7-2min 0.2 · max 0.5 ms6
Enable pin turn on/off thresholdmin 0.66 · max 1.1 V6
Input current IENVEN = 0V or 6.5V, VEN = 0V or 6.5Vmin -0.5 · max 0.5 uA6
Turnon time tonCL = 1uF, RL = 100Ω; see Figure 7-2max 3 ms6
Turnoff time toffCL = 1uF, RL = 100Ω; see Figure 7-2max 3 ms6
Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOSRILIM = 15kΩ, –40°C ≤ TJ ≤105°Cmin 1610 · typ 1700 · max 1800 mA7
Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOSRILIM = 20kΩ, TJ = 25°Cmin 1215 · typ 1295 · max 1375 mA7
Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOSRILIM = 20kΩ, –40°C ≤ TJ ≤ 125°Cmin 1200 · typ 1295 · max 1375 mA7
Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOSRILIM = 49.9kΩ, TJ = 25°Cmin 490 · typ 520 · max 550 mA7
Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOSRILIM = 49.9kΩ, –40°C ≤ TJ ≤ 125°Cmin 475 · typ 520 · max 565 mA7
Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOSRILIM = 210kΩmin 110 · typ 130 · max 150 mA7
Current-limit threshold (Maximum DC output current IOUT delivered to load) and Short-circuit current, OUT connected to GND IOSILIM shorted to INmin 50 · typ 75 · max 100 mA7
Response time to short circuit tIOSVIN = 5V; see Figure 7-3typ 2 us7
Reverse-voltage comparator trip point (VOUT – VIN)min 95 · typ 135 · max 190 mV7
Time from reverse-voltage condition to MOSFET turn offVIN = 5Vmin 3 · typ 5 · max 7 ms7
Supply current, low-level output IIN_offVIN = 6.5V, No load on OUT, VEN = 6.5V or VEN = 0Vtyp 0.1 · max 1 uA7
Supply current, high-level output IIN_onVIN = 6.5V, No load on OUT, RILIM = 20kΩtyp 120 · max 150 uA7
Supply current, high-level output IIN_onVIN = 6.5V, No load on OUT, RILIM = 210kΩtyp 100 · max 130 uA7
Reverse leakage current IREVVOUT = 6.5V, VIN = 0V, TJ = 25°Ctyp 0.01 · max 1 uA7
Low-level input voltage, IN UVLOVIN risingtyp 2.35 · max 2.45 V7
Hysteresis, INTJ = 25°Ctyp 25 mV7
Output low voltage, FAULT VOLI/FAULT = 1mAmax 180 mV7
Off-state leakageV/FAULT = 6.5Vmax 1 uA7
FAULT deglitchFAULT assertion or de-assertion due to overcurrent conditionmin 3 · typ 7.5 · max 11 ms7
FAULT deglitchFAULT assertion or de-assertion due to reverse-voltage conditionmin 2 · typ 4 · max 7 ms7
Thermal shutdown thresholdmin 155 °C7
Thermal shutdown threshold in current-limitmin 135 °C7
HysteresisThermal shutdowntyp 10 °C7

Pins, by the datasheet

6
1 IN
Input voltage; connect a 0.1uF or greater ceramic capacitor from IN to GND as close to the IC as possible. · p. 4
2 GND
Ground connection. · p. 4
3 EN
Enable input; logic high turns on power switch. · p. 4
4 FAULT
Active-low open-drain output asserted during overcurrent, overtemperature, or reverse-voltage conditions. · p. 4
5 ILIM
External resistor sets current-limit threshold; recommended 15kΩ ≤ RILIM ≤ 232kΩ. · p. 4
6 OUT
Power-switch output. · p. 4

Open-source boards using it

9See all 9
  • 4 layers66 × 90 mmIctester, the printed circuit board in 3D

    Ictester

    jakubfi/ictester

    Logic IC tester

    104 parts79
  • 2 layers75 × 60 mmCircuit design, the printed circuit board in 3D

    Circuit design

    heresiarch/esp32-wifi-eth-gateway

    This is proof of concept of a Wifi to Ethernet Gateway with ESP32

    10 parts1Apache-2.0
  • 2 layers85 × 45 mmBench, the printed circuit board in 3D

    Bench

    Amir-Vered/Bench

    Wi-Fi upload dock for Arduino

    58 partsCERN-OHL-P-2.0
  • 6 layers140 × 100 mmSbc baseboard, the printed circuit board in 3D

    Sbc baseboard

    calicopizzadelivery/sbc-development-baseboard

    Baseboard for remote management of an attached SBC: K64 MCU as USB HID to the target and Ethernet to the workstation, six switched USB-A ports, isolated SPDT relays, level-shifted console, switched target power

    271 partsApache-2.0
  • 4 layers100 × 60 mmKigeyes power io board, the printed circuit board in 3D

    Kigeyes power io board

    jrymk/KigEyes

    Video passthrough and electronic eye for Kigurumi masks

    280 parts
  • 2 layers90 × 60 mmFanCtrl3-Pro, the printed circuit board in 3D

    FanCtrl3-Pro

    mikagosz/FanCtrl3

    USB-powered controller for three 4-pin PWM fans, driven by the CPU temperature of a Proxmox VE host - KiCad, MicroPython, OpenSCAD

    39 partsMIT
  • 4 layers106 × 110 mmRearCircuitBoard 10, the printed circuit board in 3D

    RearCircuitBoard 10

    ssbingo/samba-solar-track

    Samba Solar Track – Solarnachführung mit Sturmschutz: Handbuch, Platine und Gehäuse für den Nachbau (10,1-Zoll-Version)

    329 parts
  • 4 layers42 × 100 mmPsu, the printed circuit board in 3D

    Psu

    xdylanm/modular-system-psu

    A PSU for a modular Eurorack system, featuring +/-12V and 5V rails, USB-C input, and a regulated USB-A output.

    68 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS2553DBV?

Yes. The symbol is EasyEDA_Cloud:TPS2553DBVR and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2553DBV?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TPS2553DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2553DBV?

JLCPCB lists it as part C55266, with 59,131 in stock; the sellers' links on this page open their listings.

What can replace the TPS2553DBV?

Parts like it in the library: the TPS22918DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated, the TPS27081ADDC by Texas Instruments and the AP22653W6 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS2553DBV?

9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.