Skip to the content
123456

TPS22918DBV

Texas InstrumentsExtended

-40℃~+105℃ 1 1V~5.5V 2A 53mΩ Active High Load Switch Output discharge function、Soft-start、Integrated charge pump SOT-23-6 Power Distribution Switches ROHS

Part id
ti/TPS22918DBV
Category
Power Distribution Switches
Package
SOT-23-6
Pins
6
In stock
71,251 at JLCPCB (C131941)
Used on
27 open-source boards

Overview

The TPS22918DBV is a power Distribution Switche made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+105℃ 1 1V~5.5V 2A 53mΩ Active High Load Switch Output discharge function、Soft-start、Integrated charge pump SOT-23-6 Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:MX22917T23, from EasyEDA) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 71,251 are in stock at JLCPCB (part C131941). 27 open-source boards in 19 repositories on GitHub use it.

Symbol

1VIN2GND3ON4CT5QOD6VOUT
EasyEDA_Cloud:MX22917T23From EasyEDA

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

13
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute maximum · p. 4
Works from
-40 °C · Operating free-air temperature min · p. 4
Works up to
105 °C · Operating free-air temperature max · p. 4
Junction, hottest
125 °C · Junction temperature max · p. 4
Takes working
8.3 µA · VIN quiescent current typical, VIN = 3.3 V, VON = 5 V, IOUT = 0 A · p. 5
Takes at most
17 µA · VIN quiescent current max, VIN = 1.8 V, VON = 5 V, IOUT = 0 A · p. 5
Takes asleep
500 nA · VIN shutdown current typical, VIN = 3.3 V, VON = 0 V, VOUT = 0 V · p. 5
Gives
2 A · Continuous switch current max, ambient temperature = 70°C · p. 4
Junction to air (DBV (SOT-23))
183.2 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to board (DBV (SOT-23))
34.1 K/W · Junction-to-board thermal resistance · p. 4
Junction to case (DBV (SOT-23))
151.6 K/W · Junction-to-case (top) thermal resistance · p. 4
Edge
2 µs · VOUT fall time typical, VIN = 5 V, RL = 10 Ω, CL = 0.1 uF, CT = 1000 pF, QOD open · p. 6

What it is and has

6
Load switch channels
1 · p. 1
Quick output discharge
Adjustable · p. 1
Rise time
Configurable with CT pin · p. 1
Package
SOT23-6 (DBV) · p. 1
On-resistance
52 mΩ typical at VIN = 5 V · p. 1
On-resistance
53 mΩ typical at VIN = 3.3 V · p. 1

Around it

5
cap 1 µF
between VIN and GND; Ceramic input bypass capacitor, placed close to the pins; X5R or X7R dielectric recommended. For heavy loads, input capacitance about ten times output capacitance is recommended. · p. 17
cap 22 µF
between VOUT and GND; Optional output capacitor CL in the design example; CIN greater than CL is highly recommended. · p. 16
res 58.333 Ω
between VOUT and QOD; External QOD resistance calculated for the example with a desired 4 ms fall time and CL = 22 uF. · p. 17
cap 220 pF
between CT and GND; Example rise-time capacitor for VIN = 5 V; the stated typical rise time is 650 us. · p. 19
cap 1 µF
between VIN and GND; Additional bulk capacitor may be needed when the supply is more than a few inches away; electrolytic, tantalum, or ceramic. · p. 20

Specifications

84
ParameterConditionsAs printedPage
Input voltage VINOver operating free-air temperature rangemin -0.3 · max 6 V4
Output voltage VOUTOver operating free-air temperature rangemin -0.3 · max 6 V4
ON voltage VONOver operating free-air temperature rangemin -0.3 · max 6 V4
Maximum continuous switch current IMAXambient temperature = 70°Cmax 2 A4
Maximum pulsed switch current IPLSpulse < 300 us, 2% duty cyclemax 2.5 A4
Maximum junction temperature TJmax 125 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001min -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101min -1000 · max 1000 V4
Input voltage VINmin 0 · max 5.5 V4
ON voltage VONmin 0 · max 5.5 V4
High-level input voltage, ON VIH, ONVIN = 1 V to 5.5 Vmin 1 · max 5.5 V4
Low-level input voltage, ON VIL, ONVIN = 1 V to 5.5 Vmin 0 · max 0.5 V4
Operating free-air temperature TAmin -40 · max 105 °C4
Input Capacitor CINRefer to Application and Implementation sectionmin 1 uF4
Junction-to-ambient thermal resistance RθJATPS22918, DBV (SOT-23), 6 PINStyp 183.2 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS22918, DBV (SOT-23), 6 PINStyp 151.6 °C/W4
Junction-to-board thermal resistance RθJBTPS22918, DBV (SOT-23), 6 PINStyp 34.1 °C/W4
Junction-to-top characterization parameter ψJTTPS22918, DBV (SOT-23), 6 PINStyp 37.2 °C/W4
Junction-to-board characterization parameter ψJBTPS22918, DBV (SOT-23), 6 PINStyp 33.6 °C/W4
Quiescent current IQ, VINVIN = 5.5 V, VON = 5 V, IOUT = 0 A; TA = –40°C to +105°C; typical at 25°Ctyp 9.2 · max 16 uA5
Quiescent current IQ, VINVIN = 5 V, VON = 5 V, IOUT = 0 A; TA = –40°C to +105°C; typical at 25°Ctyp 8.7 · max 16 uA5
Quiescent current IQ, VINVIN = 3.3 V, VON = 5 V, IOUT = 0 A; TA = –40°C to +105°C; typical at 25°Ctyp 8.3 · max 15 uA5
Quiescent current IQ, VINVIN = 1.8 V, VON = 5 V, IOUT = 0 A; TA = –40°C to +105°C; typical at 25°Ctyp 10.2 · max 17 uA5
Quiescent current IQ, VINVIN = 1.2 V, VON = 5 V, IOUT = 0 A; TA = –40°C to +105°C; typical at 25°Ctyp 9.3 · max 16 uA5
Quiescent current IQ, VINVIN = 1 V, VON = 5 V, IOUT = 0 A; TA = –40°C to +105°C; typical at 25°Ctyp 8.9 · max 15 uA5
Shutdown current ISD, VINVIN = 5.5 V, VON = 0 V, VOUT = 0 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.5 · max 5 uA5
Shutdown current ISD, VINVIN = 5 V, VON = 0 V, VOUT = 0 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.5 · max 4.5 uA5
Shutdown current ISD, VINVIN = 3.3 V, VON = 0 V, VOUT = 0 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.5 · max 3.5 uA5
Shutdown current ISD, VINVIN = 1.8 V, VON = 0 V, VOUT = 0 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.5 · max 2.5 uA5
Shutdown current ISD, VINVIN = 1.2 V, VON = 0 V, VOUT = 0 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.4 · max 2 uA5
Shutdown current ISD, VINVIN = 1 V, VON = 0 V, VOUT = 0 V; TA = –40°C to +105°C; typical at 25°Ctyp 0.4 · max 2 uA5
ON pin input leakage current IONVIN = 5.5 V, IOUT = 0 A; TA = –40°C to +105°Cmax 0.1 uA5
On-Resistance RONVIN = 5.5 V, IOUT = –200 mA; TA = 25°Ctyp 51 · max 59 mΩ5
On-Resistance RONVIN = 5.5 V, IOUT = –200 mA; TA = –40°C to +85°Cmax 71 mΩ5
On-Resistance RONVIN = 5.5 V, IOUT = –200 mA; TA = –40°C to +105°Cmax 78 mΩ5
On-Resistance RONVIN = 5.0 V, IOUT = –200 mA; TA = 25°Ctyp 52 · max 59 mΩ5
On-Resistance RONVIN = 5.0 V, IOUT = –200 mA; TA = –40°C to +85°Cmax 71 mΩ5
On-Resistance RONVIN = 5.0 V, IOUT = –200 mA; TA = –40°C to +105°Cmax 79 mΩ5
On-Resistance RONVIN = 4.2 V, IOUT = –200 mA; TA = 25°Ctyp 52 · max 59 mΩ5
On-Resistance RONVIN = 4.2 V, IOUT = –200 mA; TA = –40°C to +85°Cmax 71 mΩ5
On-Resistance RONVIN = 4.2 V, IOUT = –200 mA; TA = –40°C to +105°Cmax 79 mΩ5
On-Resistance RONVIN = 3.3 V, IOUT = –200 mA; TA = 25°Ctyp 53 · max 59 mΩ5
On-Resistance RONVIN = 3.3 V, IOUT = –200 mA; TA = –40°C to +85°Cmax 71 mΩ5
On-Resistance RONVIN = 3.3 V, IOUT = –200 mA; TA = –40°C to +105°Cmax 80 mΩ5
On-Resistance RONVIN = 2.5 V, IOUT = –200 mA; TA = 25°Ctyp 53 · max 61 mΩ5
On-Resistance RONVIN = 2.5 V, IOUT = –200 mA; TA = –40°C to +85°Cmax 75 mΩ5
On-Resistance RONVIN = 2.5 V, IOUT = –200 mA; TA = –40°C to +105°Cmax 80 mΩ5
On-Resistance RONVIN = 1.8 V, IOUT = –200 mA; TA = 25°Ctyp 55 · max 65 mΩ5
On-Resistance RONVIN = 1.8 V, IOUT = –200 mA; TA = –40°C to +85°Cmax 79 mΩ5
On-Resistance RONVIN = 1.8 V, IOUT = –200 mA; TA = –40°C to +105°Cmax 88 mΩ5
On-Resistance RONVIN = 1.2 V, IOUT = –200 mA; TA = 25°Ctyp 64 · max 77 mΩ5
On-Resistance RONVIN = 1.2 V, IOUT = –200 mA; TA = –40°C to +85°Cmax 88 mΩ5
On-Resistance RONVIN = 1.2 V, IOUT = –200 mA; TA = –40°C to +105°Cmax 104 mΩ5
On-Resistance RONVIN = 1.0 V, IOUT = –200 mA; TA = 25°Ctyp 71 · max 85 mΩ5
On-Resistance RONVIN = 1.0 V, IOUT = –200 mA; TA = –40°C to +85°Cmax 100 mΩ5
On-Resistance RONVIN = 1.0 V, IOUT = –200 mA; TA = –40°C to +105°Cmax 116 mΩ5
ON pin hysteresis VHYSVIN = 1 V to 5.5 V; TA = –40°C to +105°C; typical at 25°Ctyp 107 mV5
Output pull down resistance RPDVIN = 5.0 V, VON = 0 V; TA = 25°Ctyp 24 Ω5
Output pull down resistance RPDVIN = 5.0 V, VON = 0 V; TA = –40°C to +105°Cmax 30 Ω5
Output pull down resistance RPDVIN = 3.3 V, VON = 0 V; TA = 25°Ctyp 25 Ω5
Output pull down resistance RPDVIN = 3.3 V, VON = 0 V; TA = –40°C to +105°Cmax 35 Ω5
Output pull down resistance RPDVIN = 1.8 V, VON = 0 V; TA = 25°Ctyp 45 Ω5
Output pull down resistance RPDVIN = 1.8 V, VON = 0 V; TA = –40°C to +105°Cmax 60 Ω5
Turn-on time tONVIN = 5 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 1950 us6
Turn-off time tOFFVIN = 5 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 2 us6
VOUT rise time tRVIN = 5 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 2540 us6
VOUT fall time tFVIN = 5 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 2 us6
Delay time tDVIN = 5 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 690 us6
Turn-on time tONVIN = 3.3 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 1430 us6
Turn-off time tOFFVIN = 3.3 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 2 us6
VOUT rise time tRVIN = 3.3 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 1680 us6
VOUT fall time tFVIN = 3.3 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 2 us6
Delay time tDVIN = 3.3 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 590 us6
Turn-on time tONVIN = 1.8 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 965 us6
Turn-off time tOFFVIN = 1.8 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 2 us6
VOUT rise time tRVIN = 1.8 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 960 us6
VOUT fall time tFVIN = 1.8 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 2 us6
Delay time tDVIN = 1.8 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 480 us6
Turn-on time tONVIN = 1 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 725 us6
Turn-off time tOFFVIN = 1 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 3 us6
VOUT rise time tRVIN = 1 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 560 us6
VOUT fall time tFVIN = 1 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 2 us6
Delay time tDVIN = 1 V; VON = 5 V, TA = 25 °C, QOD = Open; VIN steady before ON asserted; RL = 10 Ω, CIN = 1 uF, CL = 0.1 uF, CT = 1000 pFtyp 430 us6

Pins, by the datasheet

6
1 VIN
Switch input; place ceramic bypass capacitors between VIN and GND. · p. 3
2 GND
Device ground. · p. 3
3 ON
Active high switch control input; do not leave floating. · p. 3
4 CT
Switch slew rate control; can be left floating. · p. 3
5 QOD
Quick Output Discharge pin; connect to VOUT through an external resistor or directly using the internal resistance, or leave floating to disable discharge. · p. 3
6 VOUT
Switch output. · p. 3

Open-source boards using it

27See all 27
  • 2 layers54 × 12.5 mmBrodBoost C2, the printed circuit board in 3D

    BrodBoost C2

    axiometa/BrodBoost-C2

    USB - C Breadboard Powersupply: BrodBoost-C

    31 parts36CERN-OHL-S-2.0
  • 2 layers122 × 112 mmRetroPie Power Board v1a, the printed circuit board in 3D

    RetroPie Power Board v1a

    baldengineer/Raspberry-Pi-Soft-Power-Controller

    Originally intended to be a controller for a RetroPie. A soft power controller that allows for Raspberry Pi proper shutdown. Intention is to turn this into a "hat." This is a work in progress. It works for me, kinda.

    59 parts21
  • 2 layers45 × 45 mmAkaLinkPro, the printed circuit board in 3D

    AkaLinkPro

    akkako/akaLinkPro

    akaLinkPro 是一个基于 HPM5300 的高性能 CMSIS-DAP 调试器。

    95 parts11Apache-2.0
  • 4 layers53.4 × 92.4 mmMain revb, the printed circuit board in 3D

    Main revb

    conol-ai/openwalkietalkie

    OpenMicroDial firmware — Rust/embassy on SiFli SF32LB52 (LilyGo T-Display SF32 dev board)

    142 parts3MIT
  • 4 layers68 × 16 mmBike light, the printed circuit board in 3D

    Bike light

    gladish/esp32_bike_taillight

    ESP32 Bike Rear Light

    54 parts1Apache-2.0
  • 4 layers220 × 160 mmSuperMikrobusCape, the printed circuit board in 3D

    SuperMikrobusCape

    8aChristian/-Super-Mikrobus-Cape-Testbed

    The Super Mikrobus Cape & Testbed is an industrial-grade expansion and validation platform engineered for the BeagleBone embedded computer ecosystem (BeagleBone Black, BeagleBone AI-64, BeagleY-AI, and PocketBeagle 2).

    45 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS22918DBV?

Yes. The symbol is EasyEDA_Cloud:MX22917T23 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS22918DBV?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TPS22918DBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS22918DBV?

JLCPCB lists it as part C131941, with 71,251 in stock; the sellers' links on this page open their listings.

What can replace the TPS22918DBV?

Parts like it in the library: the TPS2553DBV by Texas Instruments, the AP2553W6 by Diodes Incorporated, the TPS27081ADDC by Texas Instruments and the AP22653W6 by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS22918DBV?

27 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.