2 layers65 × 30 mm
Overview
The LMH6629SD is an operational Amplifier made by Texas Instruments in a DFN-8-EP(3x3) package with 9 pins. -40℃~+125℃ 1 1.6V/ns 18.2mA 2.7V~5.5V 250mA 35uA 3uA 450nV/℃ 690pV/√Hz@1MHz 800uV 87dB Enable/shutdown function、Built-in compensation DFN-8-EP(3x3) Operational Amplifier ROHS.
PCBKit's library has its KiCad symbol (LibrePCB_Texas_Instruments:TI LMH6629SD, from Librepcb) and its footprint (LibrePCB_Base:DFN50P300X300X75-8T200X160_reflow, from Librepcb), ready for a KiCad board. 52 are in stock at JLCPCB (part C2057393). 6 open-source boards in 5 repositories on GitHub use it.
Symbol
Footprint
Parameters
13- Common Mode Rejection Ratio(CMRR)
- 87dB
- Features
- Enable/shutdown function
- Ib - Input Bias Current
- 35uA
- Input Offset Current(Ios)
- 3uA
- Input Offset Voltage Drift(Vos TC)
- 450nV/℃
- Input Voltage Noise Density
- 690pV/√Hz@1MHz
- Number of Channels
- 1
- Operating Temperature
- -40℃~+125℃
- Output Current
- 250mA
- Quiescent Current
- 18.2mA
- Single supply
- 2.7V~5.5V
- Slew Rate
- 1.6V/ns
- Vos - Input Offset Voltage
- 800uV
Order codes
1- LMH6629SD/NOPBLCSC C2057393
Pinout
9| Pin | Name | Type |
|---|---|---|
| 1 | !PD | Passive |
| 2 | FB | Passive |
| 3 | - | Passive |
| 4 | + | Passive |
| 5 | V- | Passive |
| 6 | COMP | Passive |
| 7 | OUT | Passive |
| 8 | V+ | Passive |
| ExposedPad | V- | Passive |
Open-source boards using it
All 6- 2 layers65 × 56 mm
- 4 layers100 × 100 mm
Phmod
gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…
234 parts - 4 layers100 × 80 mm
Rpicoscope2
leslier7/ece5730-scopeboy-final-project
The ScopeBoy is a portable oscilloscope design. This was a final project for Cornell's ECE5730.
85 parts - 4 layers100 × 80 mm
- 2 layers65 × 30 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/ti/LMH6629SD" title="LMH6629SD in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/ti/LMH6629SD.jpg" alt="LMH6629SD" width="1200" height="900">[](https://pcbkit.io/parts/ti/LMH6629SD)Questions
Is there a KiCad symbol and footprint for the LMH6629SD?
Yes. The symbol is LibrePCB_Texas_Instruments:TI LMH6629SD and the footprint LibrePCB_Base:DFN50P300X300X75-8T200X160_reflow, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LMH6629SD?
DFN-8-EP(3x3), with 9 pins. Its footprint is drawn on this page.
Where is the LMH6629SD datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LMH6629SD?
JLCPCB lists it as part C2057393, with 52 in stock; the sellers' links on this page open their listings.
What can replace the LMH6629SD?
Parts like it in the library: the LMH6629SDX by Texas Instruments and the LMH6629SDE/NOPB by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LMH6629SD?
6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
Parts like it
2
LMH6629SDX
WSON-8(3x3)-40℃~+125℃ 1 1.6V/ns 1.8uA 15.5mA 2.7V~5.5V 23uA 250mA 450nV/℃ 690pV/√Hz@1MHz 780uV 87dB Enable/shutdown function、Built-in compensation WSON-8(3x3) Operational Amplifier ROHSTexas InstrumentsOperational AmplifierLMH6629SDE/NOPB
WSON-8-EP(3x3)-40℃~+125℃ 1 1.6V/ns 15.5mA 2.7V~5.5V 250mA 37uA 3uA 450nV/℃ 690pV/√Hz 780uV 87dB Enable/shutdown function、Built-in compensation WSON-8-EP(3x3) Operational Amplifier ROHSTexas InstrumentsOperational Amplifier