
Rpicoscope2
leslier7/ece5730-scopeboy-final-project
The ScopeBoy is a portable oscilloscope design. This was a final project for Cornell's ECE5730.

Polished version of the ScopeBoy project started in ECE5730
Scopeboy is an open-source printed circuit board by leslier7, from the leslier7/scopeboy repository on GitHub. It is a 4-layer board of 100 × 80 mm with 151 parts on 132 nets, routed with 2,738 tracks and 284 vias.
It is built around the LMH6629SD, OPA820ID and TLV62568DBVR-TP, with the W25Q128JVSIQ, DAC5571I and ADG621BRM among its other parts. Its parts include 55 resistors, 52 capacitors, 17 ICs, 9 connectors and 6 diodes. It belongs with the RP2350 boards of this library.
Polished version of the ScopeBoy project started in ECE5730
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0603_1608Metric | C27, C31, C32, C33, C36, C42, C43, C44, C45, C46, C49, C50, C51, C52 |
| 12 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C8, C12, C13, C14, C15, C16, C18, C19, C20, C21, C22 |
| 8 | 220 | Resistor_SMD:R_0603_1608Metric | R24, R25, R26, R27, R28, R29, R30, R31 |
| 5 | 100 | Resistor_SMD:R_0603_1608Metric | R33, R37, R38, R41, R42 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R14, R15, R19, R32, R49 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R35, R40, R43, R46 |
| 4 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C26, C30, C39, C40 |
| 4 | DNF | Resistor_SMD:R_0402_1005Metric | R1, R3, R4, R5 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R48, R54, R55 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C17, C53, C54 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R8, R9, R11 |
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric | C25, C28, C38 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R22, R23 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C23, C24 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R20, R47 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C6, C37 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 4.7u | RP2350_80QFN_minimal:C_0402_1005Metric_small_pads | C5, C7 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C10, C11 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric | R6, R7 |
| 2 | 50k | Resistor_SMD:R_0603_1608Metric | R18, R21 |
| 2 | 87k | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | BAT54WS-G3-08 | Diode_SMD:D_0603_1608Metric | D2, D3 |
| 2 | DAC5571 | Package_TO_SOT_SMD:SOT-23-6 | U12, U15 |
| 2 | SM03B-SRSS-TB | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J2, J3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R52 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric | C41 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C29 |
| 1 | 120p | Capacitor_SMD:C_0603_1608Metric | C47 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 1MEG | Resistor_SMD:R_0603_1608Metric | R45 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C48 |
| 1 | 2.2u | Inductor_SMD:L_Bourns-SRN4018 | L3 |
| 1 | 3.3u | RP2350_80QFN_minimal:L_pol_2016 | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 39 | Resistor_SMD:R_0603_1608Metric | R44 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 4.7u | Inductor_SMD:L_Bourns-SRN4018 | L2 |
| 1 | 453k | Resistor_SMD:R_0603_1608Metric | R53 |
| 1 | 47 | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R50 |
| 1 | 680 | Resistor_SMD:R_0603_1608Metric | R39 |
| 1 | 73.2k | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | 731000105 | Footprints:CONN_73100-0105_MOL | J7 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | ADC08060 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U7 |
| 1 | ADG621 | Package_SO:MSOP-10_3x3mm_P0.5mm | U9 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J8 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J9 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | D | Diode_SMD:D_0603_1608Metric | D4 |
| 1 | DNF | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | DNF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D5 |
| 1 | ESD9B5.0ST5G | Diode_SMD:D_SOD-923 | D1 |
| 1 | HDMI_A | Connector_Video:HDMI_A_Molex_208658-1001_Horizontal | J6 |
| 1 | LM27762 | Package_SON:WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65_ThermalVias | U6 |
| 1 | LM4040DBZ-2.0 | Package_TO_SOT_SMD:SOT-23 | U13 |
| 1 | LMH6629 | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | MINISMDC050F-2 | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | MT3608 (TPS61023DRLR) | Package_TO_SOT_SMD:SOT-23-6 | U18 |
| 1 | OPA354 | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | OPA820 | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | RP2350_80QFN | RP2350_80QFN_minimal:RP2350-QFN-80-1EP_10x10_P0.4mm_EP3.4x3.4mm_ThermalVias | U4 |
| 1 | RotaryEncoder_Switch | Footprints:PEC11L4115FS0020 | SW3 |
| 1 | SM04B-SRSS-TB | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J5 |
| 1 | SMBJ5.0A | Diode_SMD:D_SMB | D6 |
| 1 | TLV3501 | Package_TO_SOT_SMD:SOT-23-6 | U14 |
| 1 | TLV62568DBVR | Package_TO_SOT_SMD:SOT-23-5 | U17 |
| 1 | TLV9101 | Package_TO_SOT_SMD:SOT-23-5 | U16 |
| 1 | TPS2116DRL | Package_TO_SOT_SMD:SOT-583-8 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
It measures 100 × 80 mm and has 4 copper layers, 1.6 mm thick.
151 parts, built around the LMH6629SD, OPA820ID, TLV62568DBVR-TP and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the leslier7/scopeboy repository on GitHub, at the commit this page was made from: the board is board/scopeboy.kicad_pcb and its schematic board/analog_front_end.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask leslier7 before reusing the design.

leslier7/ece5730-scopeboy-final-project
The ScopeBoy is a portable oscilloscope design. This was a final project for Cornell's ECE5730.


gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

WAFFLE-Systems/PEC_Sensor
Electrical schematics and PCB gerber files for the Pulsed Eddy Current Sensor



