Skip to the content

TPS2116DRL

Texas InstrumentsExtended

Operating status indication SOT-583 Power Management - Specialized ROHS

Part id
ti/TPS2116DRL
Category
Power Distribution Switches
Package
SOT-583
Pins
8
In stock
54,343 at JLCPCB (C3235557)
Used on
130 open-source boards

Overview

The TPS2116DRL is a power Distribution Switche made by Texas Instruments in a SOT-583 package with 8 pins. Operating status indication SOT-583 Power Management - Specialized ROHS.

PCBKit's library has its KiCad symbol (Power_Management:TPS2116DRL, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-583-8, from KiCad's library), ready for a KiCad board. 54,343 are in stock at JLCPCB (part C3235557). 130 open-source boards in 93 repositories on GitHub use it.

Symbol

1GND2VOUT3VIN14PR15MODE6VIN28ST
Power_Management:TPS2116DRLFrom KiCad's library

Footprint

Package_TO_SOT_SMD:SOT-583-8From KiCad's library

From the datasheet

11
Supply, least
1.6 V · VIN1, recommended operating min · p. 4
Supply, most
5.5 V · VIN1, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN1 and VIN2, absolute max · p. 4
Works from
-40 °C · Ambient temperature min · p. 4
Works up to
105 °C · Ambient temperature max · p. 4
Gives
2.5 A · Maximum continuous output current · p. 1
Takes working
1.37 µA · sum of VIN1 quiescent and VIN2 standby, typical; VIN1 powers VOUT, VIN1 > VIN2 + 0.1V, 25°C · p. 5
Takes asleep
150 nA · sum of VIN1 and VIN2 shutdown, typical; MODE = 0V, PR1 = 5V, VIN1 > VIN2, 25°C · p. 5
Junction to air (DRL (SOT))
111.5 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to case (DRL (SOT))
19.4 K/W · Junction-to-case top thermal resistance · p. 4
Junction to board (DRL (SOT))
35.8 K/W · Junction-to-board thermal resistance · p. 4

What it is and has

5
Function
Power mux with manual and priority switchover · p. 1
On-resistance
40 mΩ typical · p. 1
Protection
Reverse current blocking when VOUT > VINx · p. 1
Protection
Thermal shutdown · p. 1
Package
SOT (8), 2.1 mm x 1.6 mm nominal body · p. 1

Specifications

94
ParameterConditionsAs printedPage
Input Voltage VIN1, VIN2Over operating free-air temperature rangemin -0.3 · max 6 V4
Output Voltage VOUTOver operating free-air temperature rangemin -0.3 · max 6 V4
Control Pin Voltage VST, VPR1, VMODEOver operating free-air temperature rangemin -0.3 · max 6 V4
Maximum Current IMAXOver operating free-air temperature rangemax 2.5 A4
Maximum Pulsed Current IMAX,PLSMax duration 1ms, Duty cycle of 2%max 4 A4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; rated ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; rated ±500 Vmax 500 V4
Input Voltage VIN1, VIN2Over operating free-air temperature rangemin 1.6 · max 5.5 V4
Output Voltage VOUTOver operating free-air temperature rangemin 0 · max 5.5 V4
Control Pin Voltage VST, VMODE, VPR1Over operating free-air temperature rangemin 0 · max 5.5 V4
Ambient Temperature TAmin -40 · max 105 °C4
Junction-to-ambient thermal resistance RθJATPS2116, DRL (SOT), 8-PINStyp 111.5 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)TPS2116, DRL (SOT), 8-PINStyp 19.4 °C/W4
Junction-to-board thermal resistance RθJBTPS2116, DRL (SOT), 8-PINStyp 35.8 °C/W4
Junction-to-top characterization parameter ΨJTTPS2116, DRL (SOT), 8-PINStyp 1.2 °C/W4
Junction-to-board characterization parameter ΨJBTPS2116, DRL (SOT), 8-PINStyp 19.1 °C/W4
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; TA = 25°Ctyp 1.1 uA5
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; TA = -40°C to 85°Cmax 1.9 uA5
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; TA = -40°C to 105°Cmax 2 uA5
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; TA = 25°Ctyp 0.22 uA5
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; TA = -40°C to 85°Cmax 0.31 uA5
VIN1 Standby Current ISTBY, VIN1VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; TA = -40°C to 105°Cmax 0.32 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; TA = 25°Ctyp 1.2 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; TA = -40°C to 85°Cmax 2 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; TA = -40°C to 105°Cmax 2.1 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; TA = 25°Ctyp 0.05 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; TA = -40°C to 85°Cmax 0.07 uA5
VIN2 Standby Current ISTBY, VIN2VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; TA = -40°C to 105°Cmax 0.09 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; TA = 25°Ctyp 1.32 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; TA = -40°C to 85°Cmax 3.6 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; TA = -40°C to 105°Cmax 4.4 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; TA = 25°Ctyp 0.3 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; TA = -40°C to 85°Cmax 0.51 uA5
VIN1 Quiescent Current IQ, VIN1VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; TA = -40°C to 105°Cmax 0.55 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; TA = 25°Ctyp 1.35 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; TA = -40°C to 85°Cmax 3.7 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; TA = -40°C to 105°Cmax 4.5 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; TA = 25°Ctyp 0.1 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; TA = -40°C to 85°Cmax 0.27 uA5
VIN2 Quiescent Current IQ, VIN2VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; TA = -40°C to 105°Cmax 0.29 uA5
VIN1 Shutdown Current ISD,VIN1MODE = 0V, PR1 = 5V; VIN1 > VIN2; VOUT = 0V; TA = 25°Ctyp 0.1 uA5
VIN1 Shutdown Current ISD,VIN1MODE = 0V, PR1 = 5V; VIN1 > VIN2; VOUT = 0V; TA = -40°C to 85°Cmax 1.3 uA5
VIN1 Shutdown Current ISD,VIN1MODE = 0V, PR1 = 5V; VIN1 > VIN2; VOUT = 0V; TA = -40°C to 105°Cmax 2.9 uA5
VIN1 Shutdown Current ISD,VIN1MODE = 0V, PR1 = 5V; VIN1 < VIN2; VOUT = 0V; TA = 25°Ctyp 0.05 uA5
VIN1 Shutdown Current ISD,VIN1MODE = 0V, PR1 = 5V; VIN1 < VIN2; VOUT = 0V; TA = -40°C to 85°Cmax 1 uA5
VIN1 Shutdown Current ISD,VIN1MODE = 0V, PR1 = 5V; VIN1 < VIN2; VOUT = 0V; TA = -40°C to 105°Cmax 2.4 uA5
VIN2 Shutdown Current ISD,VIN2MODE = 0V, PR1 = 5V; VIN2 > VIN1; VOUT = 0V; TA = 25°Ctyp 0.05 uA6
VIN2 Shutdown Current ISD,VIN2MODE = 0V, PR1 = 5V; VIN2 > VIN1; VOUT = 0V; TA = -40°C to 85°Cmax 1.3 uA6
VIN2 Shutdown Current ISD,VIN2MODE = 0V, PR1 = 5V; VIN2 > VIN1; VOUT = 0V; TA = -40°C to 105°Cmax 2.9 uA6
VIN2 Shutdown Current ISD,VIN2MODE = 0V, PR1 = 5V; VIN2 < VIN1; VOUT = 0V; TA = 25°Ctyp 0.05 uA6
VIN2 Shutdown Current ISD,VIN2MODE = 0V, PR1 = 5V; VIN2 < VIN1; VOUT = 0V; TA = -40°C to 85°Cmax 0.7 uA6
VIN2 Shutdown Current ISD,VIN2MODE = 0V, PR1 = 5V; VIN2 < VIN1; VOUT = 0V; TA = -40°C to 105°Cmax 2.1 uA6
Reverse leakage current out of VINx IREVVOUT = 5.5V; VINx = 0V, VINy = Open; TA = 25°Ctyp 0.001 uA6
Reverse leakage current out of VINx IREVVOUT = 5.5V; VINx = 0V, VINy = Open; TA = 85°Ctyp 0.05 uA6
Reverse leakage current out of VINx IREVVOUT = 5.5V; VINx = 0V, VINy = Open; TA = 105°Ctyp 0.15 uA6
Reverse leakage current into VOUT IREVVOUT = 5.5V; VINx = 0V, VINy = Open; TA = 25°Ctyp 0.01 uA6
Reverse leakage current into VOUT IREVVOUT = 5.5V; VINx = 0V, VINy = Open; TA = 85°Ctyp 0.1 uA6
Reverse leakage current into VOUT IREVVOUT = 5.5V; VINx = 0V, VINy = Open; TA = 105°Ctyp 0.25 uA6
PR1 pin leakage IPR1TA = -40°C to 105°Cmax 0.1 uA6
MODE pin leakage IMODETA = -40°C to 105°Cmax 0.1 uA6
ST pin leakage ISTTA = -40°C to 105°Cmax 0.03 uA6
On-Resistance RONVINx = 5V; IOUT = 200mA; TA = 25°Ctyp 37 · max 46 mΩ6
On-Resistance RONVINx = 5V; IOUT = 200mA; TA = -40°C to 85°Cmax 55 mΩ6
On-Resistance RONVINx = 5V; IOUT = 200mA; TA = -40°C to 105°Cmax 60 mΩ6
On-Resistance RONVINx = 3.3V; IOUT = 200mA; TA = 25°Ctyp 40 · max 48 mΩ6
On-Resistance RONVINx = 3.3V; IOUT = 200mA; TA = -40°C to 85°Cmax 55 mΩ6
On-Resistance RONVINx = 3.3V; IOUT = 200mA; TA = -40°C to 105°Cmax 59 mΩ6
On-Resistance RONVINx = 1.8V; IOUT = 200mA; TA = 25°Ctyp 41 · max 51 mΩ6
On-Resistance RONVINx = 1.8V; IOUT = 200mA; TA = -40°C to 85°Cmax 61 mΩ6
On-Resistance RONVINx = 1.8V; IOUT = 200mA; TA = -40°C to 105°Cmax 66 mΩ6
On-Resistance RONVINx = 1.6V; IOUT = 200mA; TA = 25°Ctyp 42 · max 52 mΩ6
On-Resistance RONVINx = 1.6V; IOUT = 200mA; TA = -40°C to 85°Cmax 68 mΩ6
On-Resistance RONVINx = 1.6V; IOUT = 200mA; TA = -40°C to 105°Cmax 74 mΩ6
Status pin VOL VOL,STIST = 1mA; TA = -40°C to 105°Cmax 0.1 V6
Status pin response time tSTST pin pulled high to low; RST = 10kΩ; TA = -40°C to 105°Ctyp 5 us6
PR1 reference voltage VREFTA = -40°C to 105°Cmin 0.92 · typ 1 · max 1.08 V6
MODE logic high threshold VIH, MODETA = -40°C to 105°Cmin 1 · max 5.5 V6
MODE logic low threshold VIL, MODETA = -40°C to 105°Cmin 0 · max 0.35 V6
Reverse current blocking response time tRCBVOUT > Selected VIN + 1V; TA = -40°C to 105°Ctyp 2 us6
Reverse current blocking rising threshold (VOUT - VIN) VRCB,RTA = -40°C to 105°Ctyp 42 · max 70 mV6
Reverse current blocking falling threshold (VOUT - VIN) VRCB,FTA = -40°C to 105°Ctyp 17 · max 40 mV6
Reverse current blocking activation current IRCBTA = -40°C to 105°Ctyp 1.4 · max 4 A6
Thermal shutdown TSDtyp 170 °C6
Thermal shutdown hysteresis TSDHYStyp 20 °C7
Switchover time, VINx = 5 V tSWRL = 10 Ω, CL = 10 uF; ambient temperature 25°Ctyp 8 us7
Switchover time, VINx = 3.3 V tSWRL = 10 Ω, CL = 10 uF; ambient temperature 25°Ctyp 6.2 us7
Switchover time, VINx = 1.8 V tSWRL = 10 Ω, CL = 10 uF; ambient temperature 25°Ctyp 17.7 us7
Delay time, VINx = 5 V tDRL = 100 Ω, CL = 10 uF; ambient temperature 25°Ctyp 1 ms7
Delay time, VINx = 3.3 V tDRL = 100 Ω, CL = 10 uF; ambient temperature 25°Ctyp 1.2 ms7
Delay time, VINx = 1.8 V tDRL = 100 Ω, CL = 10 uF; ambient temperature 25°Ctyp 1.4 ms7
Soft-start time, VINx = 5 V tSSRL = 100 Ω, CL = 10 uF; ambient temperature 25°Ctyp 1.7 ms7
Soft-start time, VINx = 3.3 V tSSRL = 100 Ω, CL = 10 uF; ambient temperature 25°Ctyp 1.3 ms7
Soft-start time, VINx = 1.8 V tSSRL = 100 Ω, CL = 10 uF; ambient temperature 25°Ctyp 0.9 ms7

Pins, by the datasheet

8
1 GND
Device ground. · p. 3
2 VOUT
Output power. · p. 3
3 VIN1
Channel 1 input power. · p. 3
4 PR1
Selects VIN1 when high and VIN2 when low. · p. 3
5 MODE
Tie to VIN1 for Priority mode; pull up to an external voltage for manual mode. · p. 3
6 VIN2
Channel 2 input power. · p. 3
7 VOUT
Output power. · p. 3
8 ST
Open drain status pin; pulled low when VIN1 is not being used. · p. 3

Open-source boards using it

130See all 130
  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 4 layers76.6 × 25.1 mmEsp atx power, the printed circuit board in 3D

    Esp atx power

    valletw/esp-atx-power

    ESP32 ATX Power Controller

    55 parts30MIT
  • 8 layers38 × 38 mmKolibri v0.5, the printed circuit board in 3D

    Kolibri v0.5

    bastian2001/Kolibri-FC-Hardware

    Hardware for the Kolibri Flight Controller. 30mm/20mm FC with RP2350 + ELRS onboard

    221 parts8GPL-3.0
  • 2 layers75 × 55 mmWellfed bench, the printed circuit board in 3D

    Wellfed bench

    Isaac-Duarte/wellfed

    Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.

    93 parts8MIT
  • 4 layers358 × 40 mmLongboi, the printed circuit board in 3D

    Longboi

    KungfuPancake/longboi

    Possibly the longest controller board to control the BoxTurtle AFC

    297 parts7Apache-2.0
  • 4 layers63 × 20 mmTwinusb.kicad, the printed circuit board in 3D

    Twinusb.kicad

    s-t-e-f-a-n/twinusb

    H₂H³ | Twin USB Host Switch × Triple USB Hub (with OLED Telemetry)

    120 parts7
  • 4 layers112 × 75 mmKvm board, the printed circuit board in 3D

    Kvm board

    FuNK3Y/picoKVM

    A network KVM that can switch inputs of smart monitors

    95 parts6
  • 4 layers23.2 × 36.1 mmGB LINK v1.4, the printed circuit board in 3D

    GB LINK v1.4

    Chisfamily/GB-Link-USB-Hardware

    An open-source USB adapter for the Game Boy Link Cable.

    60 parts4

Questions

Is there a KiCad symbol and footprint for the TPS2116DRL?

Yes. The symbol is Power_Management:TPS2116DRL and the footprint Package_TO_SOT_SMD:SOT-583-8, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS2116DRL?

SOT-583, with 8 pins. Its footprint is drawn on this page.

Where is the TPS2116DRL datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS2116DRL?

JLCPCB lists it as part C3235557, with 54,343 in stock; the sellers' links on this page open their listings.

Which open-source boards use the TPS2116DRL?

130 boards in 93 repositories on GitHub; the most starred are listed on this page, with their KiCad files.