Skip to the content
12

SMAJ5.0A

MDDExtended

-65℃~+150℃ 400W@10/1000us 43.5A 5V 7V 800uA 9.2V TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS

Part id
mdd/SMAJ5.0A
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-214AC(SMA)
Pins
2
In stock
470,253 at JLCPCB (C113952)
Used on
200 open-source boards

Overview

The SMAJ5.0A is an ESD And Surge Protection made by MDD in a DO-214AC(SMA) package with 2 pins. -65℃~+150℃ 400W@10/1000us 43.5A 5V 7V 800uA 9.2V TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Diode:SMAJ5.0A, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 470,253 are in stock at JLCPCB (part C113952). 200 open-source boards in 168 repositories on GitHub use it.

Symbol

Diode:SMAJ5.0AFrom KiCad's library

Footprint

12
Diode_SMD:D_SMAFrom KiCad's library

Pinout

2
The pins of the SMAJ5.0A
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

200See all 200
  • 4 layers68.6 × 53.3 mmDsi shield, the printed circuit board in 3D

    Dsi shield

    twlostow/dsi-shield

    Arduino MIPI DSI Shield

    224 parts524LGPL-3.0
  • 4 layers98 × 75 mmPiFinder4, the printed circuit board in 3D

    PiFinder4

    brickbots/PiFinder

    A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera

    157 parts257GPL-3.0
  • 4 layers119 × 79 mmLuxdmx, the printed circuit board in 3D

    Luxdmx

    tombueng/LuxDMX

    Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.

    97 parts97
  • 2 layers60 × 30 mmTd free, the printed circuit board in 3D

    Td free

    mawoka-myblock/td-free

    Measure the TD of your filament easily

    24 parts60EUPL-1.2
  • 4 layers106 × 63.5 mmBrineomatic, the printed circuit board in 3D

    Brineomatic

    hoeken/brineomatic

    Open Source Watermaker Controller.

    323 parts47LGPL-2.1
  • 4 layers100 × 100 mmRpi pico printer board, the printed circuit board in 3D

    Rpi pico printer board

    jackw01/pi-pico-printer-board

    Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

    224 parts42CERN-OHL-W-2.0
  • 4 layers150 × 95 mmSkysweep32 rev c, the printed circuit board in 3D

    Skysweep32 rev c

    bobberdolle1/SkySweep32

    Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype

    103 parts33GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SMAJ5.0A?

Yes. The symbol is Diode:SMAJ5.0A and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMAJ5.0A?

DO-214AC(SMA), with 2 pins. Its footprint is drawn on this page.

Where is the SMAJ5.0A datasheet?

MDD publishes it: the Datasheet link on this page opens it.

Where can I order the SMAJ5.0A?

JLCPCB lists it as part C113952, with 470,253 in stock; the sellers' links on this page open their listings.

What can replace the SMAJ5.0A?

Parts like it in the library: the SMAJ5.0CA by hongjiacheng, the SMAJ5.0CA by GOODWORK, the SMAJ5.0A by Liown and the SMAJ5.0CA by Brightking. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMAJ5.0A?

200 boards in 168 repositories on GitHub; the most starred are listed on this page, with their KiCad files.