
Iasis
hydazz/iasis
An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico
Rpi pico printer board is an open-source printed circuit board by jackw01, from the jackw01/pi-pico-printer-board repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 4-layer board of 100 × 100 mm with 224 parts on 149 nets, routed with 1,269 tracks and 264 vias.
It is built around the SC0915, AP63300WU and B1911UD--20D001014U1930, with the CL32B106KBJNNNE, ZV20K1206201NIR1 and DSS16U among its other parts. Its parts include 58 resistors, 50 capacitors, 26 diodes, 26 connectors and 6 transistors. It belongs with the RP2040 boards of this library.





Sample Klipper Configuration File
This project is released under the CERN Open Hardware Licence Version 2 - Weakly Reciprocal (CERN-OHL-W V2).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10k | Resistor_SMD:R_0603_1608Metric | R104, R112, R113, R114, R122, R123, R124, R126, R128, R130, R131, R132, R134, R135, R136, R139 +4 |
| 20 | SolderJumper_3_Open | Custom:Bi_0603_Open | JP201, JP202, JP204, JP205, JP206, JP301, JP302, JP304, JP305, JP306, JP401, JP402, JP404, JP405, JP406, JP501 +4 |
| 16 | 1n | Capacitor_SMD:C_0603_1608Metric | C203, C204, C205, C206, C303, C304, C305, C306, C403, C404, C405, C406, C503, C504, C505, C506 |
| 11 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C101, C102, C104, C109, C116, C118, C125, C127, C128, C129, C130 |
| 11 | 1k | Resistor_SMD:R_0603_1608Metric | R105, R106, R107, R116, R117, R118, R150, R202, R302, R402, R502 |
| 11 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D101, D102, D106, D107, D108, D112, D113, D114, D118, D120, D123 |
| 9 | 10u | Capacitor_SMD:C_1210_3225Metric | C115, C120, C121, C122, C124, C201, C301, C401, C501 |
| 8 | 26V | Inductor_SMD:L_1206_3216Metric | RV201, RV202, RV301, RV302, RV401, RV402, RV501, RV502 |
| 7 | 22k | Resistor_SMD:R_0603_1608Metric | R101, R109, R110, R111, R119, R120, R121 |
| 6 | DSS16U | Diode_SMD:D_SOD-123F | D103, D104, D105, D109, D110, D111 |
| 5 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C103, C105, C106, C108, C117 |
| 5 | 2.54mm | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J101, J102, J105, J106, J120 |
| 5 | BAT46WS | Diode_SMD:D_SOD-323 | D119, D121, D122, D124, D125 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R201, R301, R401, R501 |
| 4 | 2.4k | Resistor_SMD:R_0603_1608Metric | R102, R125, R129, R137 |
| 4 | DMT4011LFG | Package_SON:Diodes_PowerDI3333-8 | Q102, Q103, Q105, Q106 |
| 4 | Motor | Custom:JST_XH_plus_2.54mm_01x04 | J204, J304, J404, J504 |
| 4 | MountingHole | Custom:MountingHole_3.2mm_M3_Mask | H1, H2, H3, H4 |
| 4 | SolderJumper_2_Open | Custom:Jumper_0603 | JP203, JP303, JP403, JP503 |
| 4 | Stepper Driver Breakout | Custom:BTT_TMC2209_Breakout-16_15.2x20.3mm | A201, A301, A401, A501 |
| 4 | ~ | Fiducial:Fiducial_1mm_Mask2mm | FID101, FID102, FID103, FID104 |
| 3 | 0 | Custom:R_0603_1608Metric_Bridged | R103, R108, R148 |
| 3 | 22u | Capacitor_SMD:C_1210_3225Metric | C111, C112, C113 |
| 3 | ToolingHole | Custom:JLC_tooling_hole | H101, H102, H103 |
| 3 | ~ | Resistor_SMD:R_0603_1608Metric | R127, R133, R142 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R115, R147 |
| 2 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C114, C123 |
| 2 | 10uH | Custom:L_Bourns_SRN8040TA | L101, L102 |
| 2 | 33k | Resistor_SMD:R_0603_1608Metric | R143, R146 |
| 2 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C107, C126 |
| 2 | AP63300WU | Package_TO_SOT_SMD:TSOT-23-6 | U103, U104 |
| 2 | BSZ021N04 | Package_SON:Diodes_PowerDI3333-8 | Q101, Q104 |
| 2 | Conn_01x25 | Custom:Weidmuller_1870890000_25 | J109, J110 |
| 1 | 12p | Capacitor_SMD:C_0603_1608Metric | C119 |
| 1 | 15A | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F103 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric | R138 |
| 1 | 4504 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U101 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R144 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric | C110 |
| 1 | 5A | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F101 |
| 1 | 600ohm@100MHz | Inductor_SMD:L_0603_1608Metric | FB101 |
| 1 | 7.5A | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F102 |
| 1 | E_E0 | Custom:JST_XH_plus_2.54mm_01x03 | J118 |
| 1 | E_X | Custom:JST_XH_plus_2.54mm_01x03 | J112 |
| 1 | E_Y | Custom:JST_XH_plus_2.54mm_01x03 | J116 |
| 1 | E_Z | Custom:JST_XH_plus_2.54mm_01x03 | J117 |
| 1 | GSMF3.3CA | Diode_SMD:D_SOD-123F | D115 |
| 1 | PROBE | Custom:JST_XH_plus_2.54mm_01x03 | J121 |
| 1 | PTS636 SM25 SMTR LFS | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW101 |
| 1 | PWM_0 | Custom:JST_XH_plus_2.54mm_01x03 | J103 |
| 1 | PWM_1 | Custom:JST_XH_plus_2.54mm_01x03 | J104 |
| 1 | PWM_2 | Custom:JST_XH_plus_2.54mm_01x03 | J107 |
| 1 | PWM_3 | Custom:JST_XH_plus_2.54mm_01x03 | J108 |
| 1 | Raspberry Pi Pico | Custom:RPi_Pico_SMD_minimal | U102 |
| 1 | SMAJ30A | Diode_SMD:D_SMA | D116 |
| 1 | SMAJ5.0A | Diode_SMD:D_SMA | D117 |
| 1 | SS24 | Diode_SMD:D_SMA | D126 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J124 |
| 1 | Screw_Terminal_01x06 | Custom:Weidmuller_LMFV_5.00_06_90 | J114 |
| 1 | TH_0 | Custom:JST_XH_plus_2.54mm_01x02 | J111 |
| 1 | TH_1 | Custom:JST_XH_plus_2.54mm_01x02 | J115 |
| 1 | TH_2 | Custom:JST_XH_plus_2.54mm_01x02 | J119 |
| 1 | UART | Custom:Molex_SL_171971-0006_1x06_P2.54mm_Vertical | J113 |

hydazz/iasis
An optional Raspberry Pi Compute Module 5 carrier for Iasis. It plugs into the main board's HubPD population and carries Ethernet, NVMe storage, an accessory USB-C port and a service USB-C port.

jonahsaunders/planar-studio
KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.


introlab/t-top
T-Top is a tabletop robot designed with advanced audio and vision sensors, deep learning perceptual processing and telecommunication capabilities to provide richer interaction modalities and develop higher cognitive…


tomek-szczesny/byos_m2
Build Your Own System - a collection of stackable add-ons

NovaPrime18/nitride-nano
USB-C PD3.1 240W compatible 60V buck/boost converter nano powersupply

It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
224 parts, built around the SC0915, AP63300WU, B1911UD--20D001014U1930 and CL32B106KBJNNNE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jackw01/pi-pico-printer-board repository on GitHub, at the commit this page was made from: the board is pcb/rpi pico printer board.kicad_pcb and its schematic pcb/motor driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).