6 layers230 × 76 mm
Dual converter motherboard V1.0
Rack-Robotics/Powercore-V3
electrical-discharge power supply, open-source
130 parts85
SC0915
Raspberry Pi
Raspberry Pi Pico SMD module (including test points).
raspberry-pi/SC0915
- Category
- Uncategorised
- Pins
- 53
Overview
The SC0915 is an uncategorised made by Raspberry Pi with 49 pins. Raspberry Pi Pico SMD module (including test points).
PCBKit's library has its KiCad symbol (LibrePCB_RaspberryPi:Raspberry Pi Pico (SMD), from Librepcb) and its footprint (LibrePCB_RaspberryPi:RASPBERRY_PICO_SMD, from Librepcb), ready for a KiCad board. 54 open-source boards in 44 repositories on GitHub use it.
Symbol
Footprint
Pinout
49| Pin | Name | Type |
|---|---|---|
| 1 | GPIO0 | Passive |
| 2 | GPIO1 | Passive |
| 3 | GND | Passive |
| 4 | GPIO2 | Passive |
| 5 | GPIO3 | Passive |
| 6 | GPIO4 | Passive |
| 7 | GPIO5 | Passive |
| 8 | GND | Passive |
| 9 | GPIO6 | Passive |
| 10 | GPIO7 | Passive |
| 11 | GPIO8 | Passive |
| 12 | GPIO9 | Passive |
| 13 | GND | Passive |
| 14 | GPIO10 | Passive |
| 15 | GPIO11 | Passive |
| 16 | GPIO12 | Passive |
| 17 | GPIO13 | Passive |
| 18 | GND | Passive |
| 19 | GPIO14 | Passive |
| 20 | GPIO15 | Passive |
| 21 | GPIO16 | Passive |
| 22 | GPIO17 | Passive |
| 23 | GND | Passive |
| 24 | GPIO18 | Passive |
| 25 | GPIO19 | Passive |
| 26 | GPIO20 | Passive |
| 27 | GPIO21 | Passive |
| 28 | GND | Passive |
| 29 | GPIO22 | Passive |
| 30 | RUN | Passive |
| 31 | GPIO26 | Passive |
| 32 | GPIO27 | Passive |
| 33 | AGND | Passive |
| 34 | GPIO28 | Passive |
| 35 | ADC_VREF | Passive |
| 36 | 3V3_OUT | Passive |
| 37 | 3V3_EN | Passive |
| 38 | GND | Passive |
| 39 | VSYS | Passive |
| 40 | VBUS_OUT | Passive |
| D1 | SWCLK | Passive |
| D2 | GND | Passive |
| D3 | SWDIO | Passive |
| TP1 | TP1/USB_GND | Passive |
| TP2 | TP2/USB_DM | Passive |
| TP3 | TP3/USB_DP | Passive |
| TP4 | TP4/SMPS_PS | Passive |
| TP5 | TP5/LED | Passive |
| TP6 | TP6/BOOTSEL | Passive |
Open-source boards using it
All 54- 2 layers321.5 × 116.7 mm
- 4 layers100 × 100 mm
Rpi pico printer board
jackw01/pi-pico-printer-board
Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico
224 parts42CERN-OHL-W-2.0 - 2 layers31.1 × 66.2 mm
- 2 layers442.7 × 208.3 mm
Europe ergo
Supermagnum/Europe-ergo
A 94 key ergonomic, split keyboard suitable for European countries.
236 parts8GPL-3.0 - 2 layers139 × 139 mm
Screen driver
lambdaBoost/MC6205-graphical-display
graphical display on old neon plasma screen
285 parts7 - 2 layers60 × 60 mm
- 2 layers235 × 95.7 mm
Show this part on your page
<iframe src="https://pcbkit.io/embed/parts/raspberry-pi/SC0915" title="SC0915 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe><img src="https://pcbkit.io/embed/parts/raspberry-pi/SC0915.jpg" alt="SC0915" width="1200" height="900">[](https://pcbkit.io/parts/raspberry-pi/SC0915)Questions
Is there a KiCad symbol and footprint for the SC0915?
Yes. The symbol is LibrePCB_RaspberryPi:Raspberry Pi Pico (SMD) and the footprint LibrePCB_RaspberryPi:RASPBERRY_PICO_SMD, both drawn on this page. PCBKit places them on a board for you when you design with it.
What can replace the SC0915?
Parts like it in the library: the SC0916 by Raspberry Pi. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the SC0915?
54 boards in 44 repositories on GitHub; the most starred are listed on this page, with their KiCad files.
