Skip to the content
PCBKitNew board
SMAJ30A on a board, in 3D

SMAJ30A

GOODWORK

-55℃~+150℃ 30V 33.3V 400W 48.4V 5uA 8.3A TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS

Extended
DatasheetJLCPCBLCSCgoodwork/SMAJ30A
Category
ESD And Surge Protection (TVS, ESD)
Package
DO-214AC(SMA)
Pins
5

Overview

The SMAJ30A is an ESD And Surge Protection made by GOODWORK in a DO-214AC(SMA) package with 2 pins. -55℃~+150℃ 30V 33.3V 400W 48.4V 5uA 8.3A TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS.

PCBKit's library has its KiCad symbol (Diode:SMAJ30A, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 134,383 are in stock at JLCPCB (part C908776). 21 open-source boards in 19 repositories on GitHub use it.

Symbol

Diode:SMAJ30AFrom KiCad's library

Footprint

12
Diode_SMD:D_SMAFrom KiCad's library

Parameters

10
Clamping Voltage
48.4V
Number of Channels
1
Operating Temperature
-55℃~+150℃
Peak Pulse Current (Ipp)
8.3A
Peak Pulse Power Dissipation (Ppp)
400W
Polarity
Unidirectional
Reverse Leakage Current (Ir)
5uA
Reverse Stand-Off Voltage (Vrwm)
30V
Type
TVS
Voltage - Breakdown
33.3V

Order codes

2

Pinout

2
The pins of the SMAJ30A
PinNameType
1A1Passive
2A2Passive

Open-source boards using it

All 21
  • 4 layers100 × 100 mmRpi pico printer board, the printed circuit board in 3D

    Rpi pico printer board

    jackw01/pi-pico-printer-board

    Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

    224 parts42CERN-OHL-W-2.0
  • 4 layers65.4 × 53.3 mmWaterdrop esphome, the printed circuit board in 3D

    Waterdrop esphome

    twasilczyk/waterdrop-esphome

    Waterdrop RO system smart Wi-Fi module for Home Assistant

    39 parts15MIT
  • 4 layers190.5 × 160 mmTopiary TrimBot, the printed circuit board in 3D

    Topiary TrimBot

    griffinross2/Topiary-TrimBot

    Topiary TrimBot, an automatic topiary trimming robot. Purdue ECE Senior Design group E11 for 49595 in Fall 2025.

    285 parts2GPL-3.0
  • 4 layers52 × 74 mmFRC Sensor CAN, the printed circuit board in 3D

    FRC Sensor CAN

    barkinvar/sugerCANe

    A compact interface for three NPN, PNP or logic sensors on an FRC robot. Each port has a removable 5 V / 12 V power jumper; input type is configured in software.

    144 parts1
  • 2 layers50 × 50 mmRo system, the printed circuit board in 3D

    Ro system

    oxfordfish/STM32G0F6Px-ROC

    A reverse osmosis controller system designed around STM32.

    57 parts1CERN-OHL-P-2.0
  • 2 layers55 × 40 mmDesign1, the printed circuit board in 3D

    Design1

    beauforr/UAV-charging-demo

    Hardware demo based on UAV-Based Charging Solution.

    107 parts
  • 2 layers34.2 × 22.4 mmDrive, the printed circuit board in 3D

    Drive

    earlynerd/bl4818-drive

    replacement integrated servo drive PCB for 4818/4825 brushless motors

    64 parts
  • 4 layers40 × 40 mmDrone, the printed circuit board in 3D

    Drone

    espcaa/droneeee

    127 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/goodwork/SMAJ30A" title="SMAJ30A in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/goodwork/SMAJ30A.jpg" alt="SMAJ30A" width="1200" height="900">
A picture that opens the part, for a README
[![SMAJ30A](https://pcbkit.io/embed/parts/goodwork/SMAJ30A.jpg?size=s)](https://pcbkit.io/parts/goodwork/SMAJ30A)

Questions

Is there a KiCad symbol and footprint for the SMAJ30A?

Yes. The symbol is Diode:SMAJ30A and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SMAJ30A?

DO-214AC(SMA), with 2 pins. Its footprint is drawn on this page.

Where is the SMAJ30A datasheet?

GOODWORK publishes it: the Datasheet link on this page opens it.

Where can I order the SMAJ30A?

JLCPCB lists it as part C908776, with 134,383 in stock; the sellers' links on this page open their listings.

What can replace the SMAJ30A?

Parts like it in the library: the SMAJ30CA by GOODWORK, the SMAJ30CA by MDD, the SMAJ30CA by Diodes Incorporated and the SMAJ30A by MDD. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SMAJ30A?

21 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8