Skip to the content
123456

AP63300WU

Diodes IncorporatedExtended

-40℃~+125℃ 1 22uA 3.8V~32V 3A 500kHz 800mV~31V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS

Part id
diodes/AP63300WU
Category
DC DC Converters
Package
TSOT-23-6
Pins
6
In stock
230 at JLCPCB (C2158012)
Used on
10 open-source boards

Overview

The AP63300WU is a DC DC Converter made by Diodes Incorporated in a TSOT-23-6 package with 6 pins. -40℃~+125℃ 1 22uA 3.8V~32V 3A 500kHz 800mV~31V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (4ms_IC:AP63300, from 4ms) and its footprint (Package_TO_SOT_SMD:TSOT-23-6, from KiCad's library), ready for a KiCad board. 230 are in stock at JLCPCB (part C2158012). 10 open-source boards in 10 repositories on GitHub use it.

Symbol

1FB2EN3VIN4GND5SW6BST
4ms_IC:AP63300From 4ms

Footprint

123456
Package_TO_SOT_SMD:TSOT-23-6From KiCad's library

From the datasheet

15
Supply, least
3.8 V · VIN, recommended operating min · p. 5
Supply, most
32 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
35 V · VIN, absolute maximum DC · p. 5
Supply, absolute maximum
40 V · VIN, absolute maximum for 400ms · p. 5
Works from
-40 °C · Operating ambient temperature min · p. 5
Works up to
85 °C · Operating ambient temperature max · p. 5
Junction, hottest
160 °C · Junction temperature absolute max · p. 5
Takes working
22 µA · VIN, AP63300 quiescent current typical; no load, non-switching · p. 14
Takes asleep
1 µA · VIN, shutdown current typical; VEN = 0V · p. 6
Gives
3 A · Continuous output current rating · p. 1
Current limit
4.5 A · High-side peak current limit typical · p. 6
Feedback reference
800 mV · Feedback voltage typical; CCM · p. 6
Switches at
500 kHz · Oscillator frequency typical · p. 6
Junction to air (TSOT26)
89 K/W · Junction to ambient rating · p. 5
Junction to case (TSOT26)
39 K/W · Junction to case rating · p. 5

What it is and has

10
Package
TSOT26 · p. 1
Reference voltage accuracy
0.8V ± 1% · p. 1
Control
Fixed-frequency peak current mode · p. 14
Light-load operation
AP63300 pulse frequency modulation; up to 88% efficiency at 5mA · p. 14
Frequency spread spectrum
AP63300 switching frequency jitter ±6% · p. 15
Low-dropout mode
Supported · p. 1
Protection
Undervoltage lockout · p. 1
Protection
Output overvoltage protection · p. 1
Protection
Cycle-by-cycle peak current limit · p. 1
Protection
Thermal shutdown · p. 1

Around it

11
cap greater than 10µF
between VIN and GND; Ceramic; sufficient for most applications; place closely across VIN and GND. · p. 18
cap 22µF to 68µF
between VOUT and GND; Ceramic, low ESR; sufficient for most applications. · p. 18
cap 100nF
between BST and SW; Ceramic bootstrap capacitor required for proper operation. · p. 18
cap 10pF to 220pF
between VOUT and FB; Optional C4 to improve transient response. · p. 17
ind 2.2µH to 10µH
between SW and VOUT; Approximate recommended range; DC current rating at least 35% above maximum load current and DC resistance below 30mΩ for highest efficiency. · p. 17
res 158.0 kΩ
between VOUT and FB; R1 recommended for 5.0V output. · p. 17
res 30.1 kΩ
between FB and GND; R2 recommended for 5.0V output. · p. 17
ind 6.8 µH
between SW and VOUT; L recommended for 5.0V output. · p. 17
cap 10 µF
between VIN and GND; C1 recommended for 5.0V output. · p. 17
cap 2 x 22 µF
between VOUT and GND; C2 recommended for 5.0V output. · p. 17
cap 47 pF
between VOUT and FB; C4 recommended for 5.0V output. · p. 17

Specifications

37
ParameterConditionsAs printedPage
Supply Pin Voltage VINTA = +25°C; DCmin -0.3 · max 35 V5
Supply Pin Voltage VINTA = +25°C; 400msmin -0.3 · max 40 V5
Feedback Pin Voltage VFBTA = +25°Cmin -0.3 · max 6 V5
Enable/UVLO Pin Voltage VENTA = +25°Cmin -0.3 · max 35 V5
Switch Pin Voltage VSWTA = +25°C; DC; upper limit VIN + 0.3 Vmin -0.3 V5
Switch Pin Voltage VSWTA = +25°C; 20ns; upper limit VIN + 2.0 Vmin -2.5 V5
Storage Temperature TSTmin -65 · max 150 °C5
Junction Temperature TJmax 160 °C5
Lead Temperature TLmax 260 °C5
Human Body Model HBMmax 2000 V5
Charged Device Model CDMmax 1000 V5
Junction to Ambient θJATSOT26; FR-4 substrate, single-layer PC board, 2oz copper, minimum recommended pad layouttyp 89 °C/W5
Junction to Case θJCTSOT26; FR-4 substrate, single-layer PC board, 2oz copper, minimum recommended pad layouttyp 39 °C/W5
Supply Voltage VINTA = +25°Cmin 3.8 · max 32 V5
Output Voltage VOUTTA = +25°Cmin 0.8 · max 31 V5
Operating Ambient Temperature Range TAmin -40 · max 85 °C5
Operating Junction Temperature Range TJmin -40 · max 125 °C5
Shutdown Supply Current ISHDNTA = +25°C, VIN = 12V; VEN = 0Vtyp 1 · max 3 uA6
Supply Current (Quiescent) IQAP63300; TA = +25°C, VIN = 12V; VEN = Floating, VFB = 1.0Vtyp 22 uA6
VIN Undervoltage Rising Threshold UVLOTA = +25°C, VIN = 12Vtyp 3.5 · max 3.7 V6
VIN Undervoltage Hysteresis UVLOTA = +25°C, VIN = 12Vtyp 440 mV6
High-Side Power MOSFET On-Resistance (Note 8) RDS(ON)1TA = +25°C, VIN = 12Vtyp 75 mΩ6
Low-Side Power MOSFET On-Resistance (Note 8) RDS(ON)2TA = +25°C, VIN = 12Vtyp 40 mΩ6
HS Peak Current Limit (Note 8) IPEAK_LIMITTA = +25°C, VIN = 12Vmin 4.1 · typ 4.5 · max 4.9 A6
LS Valley Current Limit (Note 8) IVALLEY_LIMITTA = +25°C, VIN = 12Vtyp 4 A6
PFM Peak Current Limit IPFMPKAP63300; TA = +25°C, VIN = 12Vtyp 930 mA6
Zero Cross Current Threshold IZCTA = +25°C, VIN = 12Vtyp 60 mA6
Oscillator Frequency fSWTA = +25°C, VIN = 12Vmin 450 · typ 500 · max 550 kHz6
Minimum On-Time tON_MINTA = +25°C, VIN = 12Vtyp 80 ns6
Feedback Voltage VFBTA = +25°C, VIN = 12V; CCMmin 792 · typ 800 · max 808 mV6
EN Logic High VEN_HTA = +25°C, VIN = 12Vtyp 1.18 · max 1.25 V6
EN Logic Low VEN_LTA = +25°C, VIN = 12Vmin 1.03 · typ 1.09 V6
EN Input Current IENTA = +25°C, VIN = 12V; VEN = 1.5Vtyp 5.5 uA6
EN Input Current IENTA = +25°C, VIN = 12V; VEN = 1Vmin 1 · typ 1.5 · max 2 uA6
Soft-Start Time tSSTA = +25°C, VIN = 12Vtyp 4 ms6
Thermal Shutdown Threshold (Note 8) TSDVIN = 12Vtyp 160 °C6
Thermal Shutdown Hysteresis (Note 8) THysVIN = 12Vtyp 25 °C6

Pins, by the datasheet

6
1 FB
Output voltage feedback sensing terminal; connect to the output resistive divider. · p. 3
2 EN
Drive high to enable and low to disable; connect to VIN or leave floating for automatic startup; precision threshold supports programming UVLO. · p. 3
3 VIN
3.8V to 32V power input for the IC and converter MOSFETs; bypass to GND with a suitably large capacitor. · p. 3
4 GND
Power Ground. · p. 3
5 SW
Power switching output; connect the output LC filter from SW to the output load. · p. 3
6 BST
High-side gate drive boost input; connect a 100nF capacitor from BST to SW to power the high-side driver. · p. 3

Open-source boards using it

10See all 10
  • 4 layers100 × 100 mmRpi pico printer board, the printed circuit board in 3D

    Rpi pico printer board

    jackw01/pi-pico-printer-board

    Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

    224 parts42CERN-OHL-W-2.0
  • 4 layers254 × 134.6 mm2070-S-100-bus analyzer, the printed circuit board in 3D

    2070-S-100-bus analyzer

    johnwinans/2070-S-100-bus-analyzer

    An S-100 bus logic analyzer

    96 parts10
  • 4 layers72.8 × 82.1 mmHalberd v2, the printed circuit board in 3D

    Halberd v2

    RemkoPr/airo-halberd

    The Halberd coupling (paper), named after its characteristic PCB shape, is a replacement of the Robotiq I/O Coupling enhanced with a Nina B301 microcontroller, developed at IDLab-AIRO, Ghent University (Belgium), imec.

    77 parts4
  • 4 layers62 × 107 mmMSolder, the printed circuit board in 3D

    MSolder

    JX5S/JxSolder

    154 parts1
  • 2 layers160 × 35 mmIr train detector, the printed circuit board in 3D

    Ir train detector

    MarkusFischer/ir-train-detector

    128 partsGPL-3.0
  • 2 layers30 × 30 mmAP63300, the printed circuit board in 3D

    AP63300

    martvicz/mv-SS-AGH

    Repository for tasks assigned during AGH-SS recruitment

    14 parts
  • 2 layers33.5 × 39.9 mmZadanie 1.2, the printed circuit board in 3D

    Zadanie 1.2

    pedrittto/Current-Measurement-Module-Step-Down-Converter

    18 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP63300WU?

Yes. The symbol is 4ms_IC:AP63300 and the footprint Package_TO_SOT_SMD:TSOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP63300WU?

TSOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the AP63300WU datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP63300WU?

JLCPCB lists it as part C2158012, with 230 in stock; the sellers' links on this page open their listings.

What can replace the AP63300WU?

Parts like it in the library: the TPS54302DDC by Texas Instruments, the MT3608B by XI'AN Aerosemi Tech, the SY8113IADC by 矽力杰silergy and the HFP6291LR-G1 by HXY MOSFET. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP63300WU?

10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.