

- Size
- 33.5 × 39.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 9
- Pads
- 40
- Tracks, vias
- 33, 19
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Mar 2026
- Updated
- 27 Apr 2026
Overview
Zadanie 1.2 is an open-source printed circuit board by pedrittto, from the pedrittto/Current-Measurement-Module-Step-Down-Converter repository on GitHub. It is a 2-layer board of 33.5 × 39.9 mm with 18 parts on 9 nets, routed with 33 tracks and 19 vias.
It is built around the AP63300WU. Its parts include 8 capacitors, 3 resistors, 2 diodes, 1 IC and 1 inductor.
Main components
1README
README.mdCurrent Measurement Module & Step Down Converter
Autor: Piotr Radziej
1.Moduł pomiaru prądu 50A / 24V
Zaprojektowany układ typu High-Side oparty na precyzyjnym wzmacniaczu pomiarowym.
- Specyfikacja:
- Zakres prądowy: do 50A (szczytowo 65A).
- Wyjście: liniowe 0-3.3V, gotowe pod ADC.
- Układ: INA290A3 (Gain 100 V/V).
- Bocznik: 0.5 mΩ, obudowa 2512 (niski dryft termiczny).
- Cechy projektu:
- Zastosowanie połączeń Kelvina dla maksymalnej precyzji.
- Filtr wyjściowy RC.
2.Przetwornica Step-Down 5V / 3A
Projekt synchronicznej przetwornicy Buck opartej na układzie AP63300.
- Specyfikacja:
- Wejście: 24V nominalnie (max 32V).
- Wyjście: 5V / 3A ciągłego obciążenia.
- Częstotliwość: 500 kHz (Spread Spectrum EMI reduction).
- Cechy projektu:
- Minimalizacja pętli Hot Loop (kondensator C1 tuż przy pinach VIN/GND).
- Zredukowany poligon węzła SW dla ograniczenia emisji EMI.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C7 |
| 2 | 20uF | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | Conn_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J_IN1, J_OUT1 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric | C2 |
| 1 | 158k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 30.1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 3A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 56pF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 6.8uH | Inductor_SMD:L_7.3x7.3_H4.5 | L1 |
| 1 | AP63300 | Package_TO_SOT_SMD:TSOT-23-6 | U1 |
| 1 | D_TVS | Diode_SMD:D_SMB | D1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
More from pedrittto/Current-Measurement-Module-Step-Down-Converter
1- 2 layers51.8 × 51.6 mm

Similar boards
- 4 layers100 × 100 mm

Rpi pico printer board
jackw01/pi-pico-printer-board
Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico
224 parts42CERN-OHL-W-2.0 - 4 layers254 × 134.6 mm

- 4 layers72.8 × 82.1 mm

Halberd v2
RemkoPr/airo-halberd
The Halberd coupling (paper), named after its characteristic PCB shape, is a replacement of the Robotiq I/O Coupling enhanced with a Nina B301 microcontroller, developed at IDLab-AIRO, Ghent University (Belgium), imec.
77 parts4 - 4 layers62 × 107 mm

- 4 layers80.4 × 79.8 mm

- 2 layers160 × 35 mm

- 2 layers30 × 30 mm

- 2 layers125.7 × 35.6 mm

Regulator board
RoboSubLA/wailord_electrical
RoboSubLA Wailord 2022-2023 Electrical Design Repository
73 partsGPL-3.0
Questions
How big is the Zadanie 1.2 PCB?
It measures 33.5 × 39.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zadanie 1.2 use?
18 parts, built around the AP63300WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zadanie 1.2 KiCad files?
From the pedrittto/Current-Measurement-Module-Step-Down-Converter repository on GitHub, at the commit this page was made from: the board is zadanie 1.2/zadanie 1.2.kicad_pcb and its schematic zadanie 1.1/zadanie 1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zadanie 1.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask pedrittto before reusing the design.