
ThrusterV3
RoboSubLA/wailord_electrical
RoboSubLA Wailord 2022-2023 Electrical Design Repository

RoboSubLA Wailord 2022-2023 Electrical Design Repository
Regulator board is an open-source printed circuit board by RoboSubLA, from the RoboSubLA/wailord_electrical repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 125.7 × 35.6 mm with 73 parts on 32 nets, routed with 56 tracks and 45 vias.
It is built around the AP63300WU. Its parts include 20 capacitors, 13 resistors, 13 connectors, 5 diodes and 5 fuses. It belongs with the power boards of this library.
Katherine Bonomo & Andrew Ye
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 5VOUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2, J3, J4, J5, J6, J7, J8, J9, J10 |
| 8 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C9, C10, C14, C15, C19, C20 |
| 5 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5 |
| 4 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C7, C12, C17 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6, C11, C16 |
| 4 | 30.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R6, R8 |
| 4 | 3A | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F2, F3, F4, F5 |
| 4 | AP63300WU | Package_TO_SOT_SMD:TSOT-23-6 | U1, U2, U3, U4 |
| 4 | EN | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 158k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11, R12 |
| 3 | 47p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8, C13 |
| 3 | 6.8u | AUVCSLA_FootLib:L_Bourns_SRP6030 | L1, L2, L3 |
| 3 | 9VOUT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11, J12, J13 |
| 1 | 10A | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | 10u | AUVCSLA_FootLib:L_Bourns_SRP6030 | L4 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 309k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | BATT | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
| 1 | Logo_Open_Hardware_Large | Symbol:OSHW-Logo2_9.8x8mm_SilkScreen | LOGO1 |

RoboSubLA/wailord_electrical
RoboSubLA Wailord 2022-2023 Electrical Design Repository

jackw01/pi-pico-printer-board
Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico


RemkoPr/airo-halberd
The Halberd coupling (paper), named after its characteristic PCB shape, is a replacement of the Robotiq I/O Coupling enhanced with a Nina B301 microcontroller, developed at IDLab-AIRO, Ghent University (Belgium), imec.





It measures 125.7 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the AP63300WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RoboSubLA/wailord_electrical repository on GitHub, at the commit this page was made from: the board is regulator_board/regulator_board.kicad_pcb and its schematic regulator_board/regulator_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).