Skip to the content

Boards using the SMAJ5.0A

200 boards

Boards in 168 GitHub repositories, designed in KiCad, that use the SMAJ5.0A by MDD (-65℃~+150℃ 400W@10/1000us 43.5A 5V 7V 800uA 9.2V TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the SMAJ5.0A’s symbol, footprint and pinout are on its own page.

  • 4 layers68.6 × 53.3 mmDsi shield, the printed circuit board in 3D

    Dsi shield

    twlostow/dsi-shield

    Arduino MIPI DSI Shield

    224 parts524LGPL-3.0
  • 4 layers98 × 75 mmPiFinder4, the printed circuit board in 3D

    PiFinder4

    brickbots/PiFinder

    A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera

    157 parts257GPL-3.0
  • 4 layers119 × 79 mmLuxdmx, the printed circuit board in 3D

    Luxdmx

    tombueng/LuxDMX

    Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.

    97 parts97
  • 2 layers60 × 30 mmTd free, the printed circuit board in 3D

    Td free

    mawoka-myblock/td-free

    Measure the TD of your filament easily

    24 parts60EUPL-1.2
  • 4 layers106 × 63.5 mmBrineomatic, the printed circuit board in 3D

    Brineomatic

    hoeken/brineomatic

    Open Source Watermaker Controller.

    323 parts47LGPL-2.1
  • 4 layers100 × 100 mmRpi pico printer board, the printed circuit board in 3D

    Rpi pico printer board

    jackw01/pi-pico-printer-board

    Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

    224 parts42CERN-OHL-W-2.0
  • 4 layers150 × 95 mmSkysweep32 rev c, the printed circuit board in 3D

    Skysweep32 rev c

    bobberdolle1/SkySweep32

    Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype

    103 parts33GPL-3.0
  • 4 layers44.8 × 76 mmTiny scarab, the printed circuit board in 3D

    Tiny scarab

    Embeetle/tiny-scarab

    Tiny beetle board based on the CH32V003 10-cent chip.

    147 parts24MIT
  • 2 layers120.4 × 100.4 mmRelaymux, the printed circuit board in 3D

    Relaymux

    PetteriAimonen/relaymux

    Hardware and firmware for a USB connected relay box

    59 parts18BSD-2-Clause
  • 2 layers125 × 125 mmJbc station, the printed circuit board in 3D

    Jbc station

    hrandib/jbc_station

    3 channel universal soldering station for T12, T115, T210, T245, T470 handles

    290 parts17GPL-3.0
  • 6 layers144.8 × 106.7 mmLoriques, the printed circuit board in 3D

    Loriques

    skot/Loriques

    A solar powered Meshtastic LoRa gateway

    122 parts17CERN-OHL-S-2.0
  • 2 layers100.3 × 69.9 mmHDD Synth Prototype MK5, the printed circuit board in 3D

    HDD Synth Prototype MK5

    MaverickUK/HDDSynth

    Recreate the sound of mechanical spinning HDDs on retro PCs that use a solid state drive

    112 parts16
  • 4 layers144 × 127 mmFrothfet, the printed circuit board in 3D

    Frothfet

    hoeken/frothfet

    Yarrboard load controller board with current sense, volt sense, fuses, and sender support.

    394 parts14GPL-3.0
  • 4 layers241.7 × 56.7 mmDaisy studio, the printed circuit board in 3D

    Daisy studio

    squeedee/daisy-studio

    Daisy Seed Carrier for Balanced Pro Audio

    141 parts14MIT
  • 4 layers102 × 100 mmZelvicka, the printed circuit board in 3D

    Zelvicka

    RoboticsBrno/Robutek

    Robůtek je robotická platforma založená na čipu ESP32-S3. Je velice rozšitiřelný, ale ze základu umí jezdit, kreslit fixou, jezdit po čáře, pohybovat se bludištěm. Programování je přes Jaculus.

    214 parts12
  • 4 layers34 × 40 mmWingFC, the printed circuit board in 3D

    WingFC

    BryanSouza91/WingFC

    WingFC is an open-source embedded flight controller for sub-250g fixed-wing aircraft, built with TinyGo. It provides stabilization, mixing, and safety features for elevon-equipped models, with a focus on reliability and…

    38 parts10MIT
  • 4 layers48 × 96 mmMain Control Board, the printed circuit board in 3D

    Main Control Board

    baoqi-zhong/Awesome-SMT-Machine

    A single head 🔥SMT Machine🔥 based on FOC stepper motors. Pure self-developed and fully open-sourced.

    188 parts9
  • 6 layers146.1 × 58.4 mmComp Board, the printed circuit board in 3D

    Comp Board

    badaboombox/SS-Handheld-Console

    An open-source handheld game console built around a Lattice ECP5 FPGA that uses a custom hybrid 2D + 3D graphics engine capable of DS-era 2D-and-3D gameplay at a locked 60 fps.

    248 parts6
  • 2 layers66 × 99.1 mmEsr meter, the printed circuit board in 3D

    Esr meter

    vpatkov/esr-meter

    AC ohmmeter

    105 parts5
  • 2 layers91.5 × 57.5 mmZPool v2.0, the printed circuit board in 3D

    ZPool v2.0

    a-bulcke/zpool

    Capteurs Zigbee pour gestion de piscine

    61 parts3Apache-2.0
  • 2 layers62.2 × 95.6 mmDiyBMS CurrentVoltage ADS1115, the printed circuit board in 3D

    DiyBMS CurrentVoltage ADS1115

    ff0000wire/diyBMS_CurrentVoltage_ADS1115

    Isolated current and voltage sensor for up to 850V based on ADS1115 and attiny1614

    51 parts3
  • 2 layers54 × 35 mmController, the printed circuit board in 3D

    Controller

    kamilix2003/Phase-Shifter

    Interface for RF phase shifter as part of phased antenna array

    67 parts3MIT