
Skysweep32 pro
bobberdolle1/SkySweep32
Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype

Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype
Skysweep32 rev c is an open-source printed circuit board by bobberdolle1, from the bobberdolle1/SkySweep32 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 150 × 95 mm with 103 parts on 93 nets, routed with 1,177 tracks and 141 vias.
It is built around the ESP32-S3-WROOM-1-N16R8, E28-2G4M12SX and SAM-M10Q-00B, with the BQ24074RGTR, MAX17048G+T10 and USBLC6-2SC6 among its other parts. Its parts include 31 resistors, 28 capacitors, 7 connectors, 6 ICs and 5 diodes. It belongs with the radio and wireless boards and the ESP32 boards of this library.
READY FOR FIRST PHYSICAL PROTOTYPE — NOT PRODUCTION VALIDATED. The package below is the only current fabrication/assembly source. Reproduce its gates before ordering and then complete the physical validation checklist.
Rev C is a four-layer, 150 × 95 mm passive-monitor carrier around an ESP32-S3-WROOM-1-N16R8. Fitted receive paths cover 855–925 MHz (E07/CC1101), 2.4 GHz (E28/SX1281), and 5.8 GHz (RX5808 RSSI). It also includes SAM-M10Q GNSS, microSD, OLED harness, local controls/alerts, USB-C, a protected 1S battery path, and ESP32-S3 Wi-Fi/BLE/ESP-NOW.
BUILD.md for exact tools and fabrication/assembly files.hardware_manifest.json for exact parts,
footprints, pins, DNP choices, supplier/manufacturer references, and envelopes.manufacturing/ only after reproducing the current
evidence with tools/hardware/verify.py.ASSEMBLY_AND_BRINGUP.md.PROTOTYPE_VALIDATION_CHECKLIST.md.| Authority | Files |
|---|---|
| Electrical / PCB | skysweep32_rev_c.kicad_sch, skysweep32_rev_c.kicad_pcb |
| Exact integration contract | hardware_manifest.json |
| Firmware pin/profile contract | generated src/generated/hardware_rev_c.h, boards/skysweep32_rev_c.json |
| Fabrication package | manufacturing/ |
| Enclosure and assembly geometry | enclosure/ |
| Machine evidence | validation/, regenerated by tools/hardware/verify.py |
3dmodels/*_ENVELOPE.step are labelled mechanical-envelope approximations unless
the manifest says otherwise. They are fit constraints, not manufacturer CAD proof.
Current evidence records zero current ERC errors/warnings, zero DRC violations, zero unexpected PCB pads, and CAD enclosure collision/service checks. It does not establish charging safety, antenna behavior, RF sensitivity/selectivity, GNSS performance, USB integrity, enclosure tolerances, reliability, compliance, or production yield. Those require an assembled board and measurements.
See ROADMAP.md, the root BUILD_THIS.md,
and project documentation.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C6, C9, C11, C13, C15, C24, C29 |
| 7 | 10u | Capacitor_SMD:C_0805_2012Metric | C5, C8, C10, C12, C14, C16, C25 |
| 6 | 22u | Capacitor_SMD:C_1206_3216Metric | C3, C4, C20, C21, C22, C23 |
| 5 | 100k | Resistor_SMD:R_0603_1608Metric | R16, R19, R28, R29, R30 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R20 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric | C1, C17, C18, C19 |
| 4 | 47k | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14 |
| 4 | M3 NPTH / 10mm FASTENER KEEPOUT | MountingHole_M3_5mm_Keepout | H1, H2, H3, H4 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R15, R18 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R17, R31 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R26, R27 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | PMEG3020EP | Diode_SMD:D_SOD-128 | D2, D4 |
| 1 | 1.13k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 1.18k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 1uH SRN6028C-1R0Y | Inductor_SMD:L_Bourns-SRN6028 | L2 |
| 1 | 3.9uH SRN6028-3R9M | Inductor_SMD:L_Bourns-SRN6028 | L1 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 4.12k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 46.4k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 470u 10V | Capacitor_SMD:CP_Elec_10x10 | C26 |
| 1 | 5.8-GHZ SMA | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J7 |
| 1 | AP63203WU-7 | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | BATTERY — ADAFRUIT PID 328 | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J6 |
| 1 | BAT_CELL | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW2 |
| 1 | BQ24074RGTR | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U4 |
| 1 | CHARGE | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | CMT-1203-SMT-TR | SkySweep32RevC:Buzzer_CUI_CMT_1203_SMT_TR | BZ1 |
| 1 | E07-900M10S | SkySweep32RevC:Module_Ebyte_E07_900M10S | RF2 |
| 1 | E28-2G4M12SX | SkySweep32RevC:Module_Ebyte_E28_2G4M12SX | RF1 |
| 1 | ESP32-S3-WROOM-1-N16R8 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | MAX17048G+T10 | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.3mm | U6 |
| 1 | MF-MSMF200-2 | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | Molex 104031-0811 | Connector_Card:microSD_HC_Molex_104031-0811 | J2 |
| 1 | OLED STEMMA QT | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | OPTIONAL VIBRATION MOTOR | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW1 |
| 1 | RX5808-2012-12P | SkySweep32RevC:Module_RX5808_2012_12P | RF3 |
| 1 | RX5808_RSSI_ADC | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | SAM-M10Q-00B | SkySweep32RevC:Module_UBlox_SAM_M10Q | GPS1 |
| 1 | SMAJ5.0A | Diode_SMD:D_SMA | D1 |
| 1 | SUB-GHZ SMA | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J5 |
| 1 | SYSTEM POWER | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW4 |
| 1 | SYS_5V | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | TPS61232DRCR | Package_SON:Texas_S-PVSON-N10_ThermalVias | U5 |
| 1 | UART0_RX | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | UART0_TX | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USER | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW3 |
| 1 | VBUS_PROTECTED | TestPoint:TestPoint_Pad_D1.0mm | TP1 |

bobberdolle1/SkySweep32
Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype



JoeMighty/opentouch-s3
A modern remake of the Bare Conductive Touch Board: 12 capacitive touch electrodes, MP3/WAV/MIDI audio, and now WiFi, Bluetooth LE, USB-C, a proper LiPo power path, a fuel gauge, line-in, MIDI out, Qwiic and an RGB LED.

semtronik/link-hardware
Open hardware for the Semtronik Link devices: ESP32-S3 base board, interface modules and enclosure. KiCad and Fusion sources, CERN-OHL-S v2.


Hustlenix/Nightwave
Offline-first, battery-powered ESP32-S3 music player for the Hack Club Pixl Trial


It measures 150 × 95 mm and has 4 copper layers, 1.6 mm thick.
103 parts, built around the ESP32-S3-WROOM-1-N16R8, E28-2G4M12SX, SAM-M10Q-00B and BQ24074RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bobberdolle1/SkySweep32 repository on GitHub, at the commit this page was made from: the board is hardware/rev_c/skysweep32_rev_c.kicad_pcb and its schematic hardware/rev_c/01_power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).