2 layers60 × 111.3 mm
Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0
ESP32-S3
177 boardsKiCad boards from 105 GitHub repositories tagged “esp32-s3”, the most starred first; open any of them in PCBKit.
- 4 layers52 × 52 mm
Moto gps rev a1
mx3353672833-debug/moto-gps-waveshare
MOTO GPS · Waveshare ESP32-S3 1.75C 圆屏导航 + iPhone App | Author: Maler X | Noncommercial, attribution required | Experimental
112 parts529 - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 4 layers37.1 × 37.2 mm
Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
44 parts252GPL-3.0 - 2 layers36 × 58 mm
Ups adaptor
aronreid/ups-to-esp32
Put a USB-only UPS on the network: an ESP32-S3 board and firmware that serves NUT on TCP 3493, with a web UI. No host computer, no Raspberry Pi.
38 parts130GPL-3.0 - 4 layers119 × 79 mm
Luxdmx
tombueng/LuxDMX
Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.
97 parts97 - 4 layers65 × 30 mm
- 2 layers17.3 × 24.5 mm
- 2 layers22 × 71 mm
- 4 layers150 × 95 mm
Skysweep32 rev c
bobberdolle1/SkySweep32
Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype
103 parts33GPL-3.0 - 4 layers82.8 × 33 mm
E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power
162 parts22 - 2 layers105 × 65 mm
MoleNet V5.2.2
ComNets-Bremen/MoleNet
MoleNet: A Wireless Underground Sensor Network platform
71 parts13GPL-3.0 - 4 layers60.6 × 27.6 mm
Display pcb
HW-Lab-Hardware-Design-Agency/WebScreen-PCB
WebScreen PCB designs, BOM and other manufacturing files.
93 parts13CERN-OHL-P-2.0 - 4 layers37.6 × 39.4 mm
Layouts
eigenlucy/spacebridgehabpcb
High Altitude Balloon Tracker, Telemetry, and Sensor Board
52 parts11 - 6 layers158 × 174 mm
TritonECU Main
alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry
457 parts10 - 4 layers29 × 54.4 mm
ESP32-S3-Breakout
eggsampler/ESP32-S3-Breakout
A minimal breakout board for the ESP32-S3-WROOM module
34 parts10MIT - 4 layers97.5 × 90.6 mm
ESP S3-CP-24 Platform
WhirlingBits/ESP32-S3-Platform
ESP32-S3 Development Board with SD-Card and versatile power management 5V and up to 12V
193 parts10MIT - 2 layers
Insta360-joystick
jfwoods/insta360link-controller
A lightweight daemon, CLI tool, and (optional) firmware + hardware for controlling an Insta360 Link webcam without the first-party software.
58 parts9 - 2 layers100 × 62 mm
Esp32s3aprs
mcapdeville/esp32s3aprs
ESP32s3 APRS beacon/tracker/logger, USB kiss TNC , USB audio FM tranceiver with Micropython shell
156 parts8CERN-OHL-S-2.0 - 4 layers68.5 × 116.1 mm
Cerberus Proto Board
463N7/Cerberus-Dev-Board
Hardware and programming reference for the Cerberus development board: pinouts, firmware interfaces, expansion boards, batteries, and antennas. No device schematics.
5 parts7 - 2 layers35 × 50 mm
Imu rc hand unit
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
76 parts7MIT - 2 layers40.7 × 43 mm
Aero Hand Open Left
ss1-ops/robotic-arm-5-digit-manipulator
BCN3D Moveo 6-DOF arm + custom Aero Hand gripper. ROS 2 Jazzy, ESP32-S3 micro-ROS, vision pick-and-place, full hardware/firmware/software stack.
28 parts7MIT - 4 layers14 × 32.7 mm
- 2 layers45 × 30 mm
