

Power Supply
Power management for mobile robotic
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 318
- Nets
- 331
- Pads
- 1,196
- Tracks, vias
- 554, 143
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Sep 2026
- Updated
- 10 Oct 2026
Overview
Power Supply is an open-source printed circuit board by bernau01, from the bernau01/zh_power_supply repository on GitHub. It is a 4-layer board of 100 × 100 mm with 318 parts on 331 nets, routed with 554 tracks and 143 vias.
It is built around the TLV9002IPWR-MS, MCP4728-E/UN and LM74900QRGERQ1, with the SN74LVC2G14DBV, AMS1117-3.3 and LM5066H1PWP among its other parts. Its parts include 129 resistors, 84 capacitors, 26 diodes, 20 connectors and 19 ICs. It belongs with the power boards and the STM32 boards of this library.
Main components
12TLV9002IPWR-MS
TSSOP-8-2.75V~-900mV、900mV~2.75V -40℃~+85℃ 1.8V~5.5V 1.8uV/℃ 1MHz 1V/us 1pA 2 28uA 3mV 45mA 5pA 65nV/√Hz@1kHz 80dB Rail-to-Rail Input, Rail-to-Rail Output TSSOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierMCP4728-E/UN
MSOP-10-40℃~+125℃ 12 2.7V~5.5V 2LSB 4 40nA 6us I2C Integrated buffer、Power-on reset、Power-down mode、Programmable gain Voltage Buffer MSOP-10 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)LM74900QRGERQ1
VQFN-24(4x4)-40℃~+150℃ 10.5mV 11.5V 2.6A 20mA 3V~65V 65V 750uA External Common Source FET VQFN-24(4x4) ORing Controllers ROHSTexas InstrumentsPower Distribution SwitchesSN74LVC2G14DBV
SOT-23-6-40℃~+125℃ 1.4V~3.7V 1.65V~5.5V 10uA 2 2 300mV~1.4V 32mA 32mA 4.7ns@5V,50pF 74LVC Series Schmitt trigger SOT-23-6 Inverters ROHSTexas InstrumentsInvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM5066H1PWP
TSSOP-28TSSOP-28 Surge Protection Devices (SPDs) ROHSTexas InstrumentsSurge Protection Devices (SPDs)SN74HCS02D
SOIC-14-40℃~+125℃ 1.5V~4.2V 12ns@6V,50pF 180mV~300mV、220mV~330mV 1V~3V 2 2V~6V 2uA 4 4V~4.3V、5.4V 7.8mA 7.8mA 74HCS Series NOR Gate Push-pull Schmitt trigger SOIC-14 Logic Gates ROHSTexas InstrumentsLogic GatesTLP175A
SMD-41ms 5V 60V FET SMD-4 Transistor, Photovoltaic Output Optoisolators ROHSToshibaTransistor, Photovoltaic Output OptoisolatorsCSD18540Q5B
VSON-8(5x6)-55℃~+175℃ 1 N-channel 1.9V 2.6mΩ 205A 20pF 3.8W 4.23nF 41nC@10V 60V 808pF N-Channel VSON-8(5x6) MOSFETs ROHSTexas InstrumentsMOSFETsXT60-F
--、Banana Connector Female Gold Plated Yellow - Power connector / plug connectorChangzhou Amass ElecPlugAONS66917
DFN-8(5x6)MOSFETsAlpha & Omega SemiconductorIPB017N10N5LF-VB
TO-263-7MOSFETsVBsemi Elec
README
README.mdzh_power_supply
Parts
318| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C3, C13, C14, C23, C24, C25, C28, C29, C31, C33, C34, C44, C48, C50, C51 +12 |
| 18 | 1k | Resistor_SMD:R_0603_1608Metric | R18, R34, R45, R46, R47, R48, R53, R54, R70, R87, R102, R105, R112, R115, R122, R125 +2 |
| 18 | 8n2 | Capacitor_SMD:C_0603_1608Metric | C11, C17, C26, C27, C37, C43, C57, C58, C59, C65, C66, C67, C73, C74, C75, C81 +2 |
| 16 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R24, R27, R29, R60, R63, R65, R85, R88, R93, R101, R103, R111, R113, R121, R123 |
| 13 | 10 | Resistor_SMD:R_0603_1608Metric | R14, R15, R16, R17, R19, R20, R25, R33, R35, R39, R40, R69, R71 |
| 11 | 100k | Resistor_SMD:R_0603_1608Metric | R8, R26, R42, R44, R64, R80, R84, R91, R100, R110, R120 |
| 11 | 1u | Capacitor_SMD:C_1206_3216Metric | C2, C4, C5, C15, C35, C46, C47, C49, C61, C69, C77 |
| 9 | 10u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C19, C22, C39, C42, C53, C60, C68, C76, C84 |
| 9 | 200k | Resistor_SMD:R_0603_1608Metric | R55, R57, R76, R78, R82, R89, R104, R114, R124 |
| 8 | 0 | Resistor_SMD:R_0603_1608Metric | R10, R11, R28, R62, R98, R108, R118, R128 |
| 8 | 2R2 | Resistor_SMD:R_1206_3216Metric | R21, R31, R67, R86, R99, R109, R119, R129 |
| 8 | 3V9 | Diode_SMD:D_SMF | D12, D16, D19, D22, D23, D26, D27, D30 |
| 8 | CSD18540Q5B | Package_TO_SOT_SMD:TDSON-8-1 | Q7, Q8, Q9, Q10, Q11, Q13, Q15, Q17 |
| 6 | 100uF/50V | Capacitor_SMD:CP_Elec_10x7.7 | C7, C8, C9, C10, C30, C45 |
| 6 | 4k7 | Resistor_SMD:R_0603_1608Metric | R2, R4, R41, R43, R59, R61 |
| 5 | 68k | Resistor_SMD:R_0603_1608Metric | R6, R49, R50, R51, R52 |
| 5 | RED | LED_SMD:LED_0805_2012Metric | D4, D13, D20, D24, D28 |
| 5 | XT30-F | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J14, J15, J16, J17, J18 |
| 5 | XT60-F | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J8, J9, J10, J11, J12 |
| 4 | 10A | Fuse:Fuseholder_Littelfuse_Nano2_154x | F1, F2, F3, F4 |
| 4 | 270 | Resistor_SMD:R_0603_1608Metric | R95, R106, R116, R126 |
| 4 | 3k3 | Resistor_SMD:R_0603_1608Metric | R56, R58, R77, R81 |
| 4 | 6k8 | Resistor_SMD:R_0603_1608Metric | R9, R23, R79, R83 |
| 4 | AONS66917 | Package_TO_SOT_SMD:TDSON-8-1 | Q12, Q14, Q16, Q18 |
| 4 | IPB017N10N5LF | Package_TO_SOT_SMD:TO-263-6 | Q1, Q2, Q4, Q5 |
| 4 | JER1206F1R002 | Resistor_SMD:R_1206_3216Metric | R96, R107, R117, R127 |
| 4 | LM74900QRGERQ1 | Library:IC_LM74900QRGERQ1 | U16, U17, U19, U20 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H3, H5, H7 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H2, H4, H6, H8 |
| 4 | SM6T33A | Diode_SMD:D_SMB | D1, D2, D3, D11 |
| 4 | TestPoint_Small | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4 |
| 3 | 47uF/35V | Capacitor_SMD:CP_Elec_6.3x5.8 | C21, C41, C56 |
| 3 | 680p | Capacitor_SMD:C_0603_1608Metric | C18, C20, C40 |
| 3 | SS14 | Diode_SMD:D_SMA | D8, D9, D10 |
| 3 | TLV3502AIDR | Package_SO:VSSOP-8_3x3mm_P0.65mm | U6, U7, U12 |
| 2 | 18k | Resistor_SMD:R_0603_1608Metric | R36, R72 |
| 2 | 18p | Capacitor_SMD:C_0603_1608Metric | C16, C36 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric | R5, R75 |
| 2 | 2k15 | Resistor_SMD:R_0603_1608Metric | R32, R68 |
| 2 | 30R9 | Resistor_SMD:R_0603_1608Metric | R38, R74 |
| 2 | 40k2 | Resistor_SMD:R_0603_1608Metric | R30, R66 |
| 2 | 56n | Capacitor_SMD:C_0603_1608Metric | C12, C32 |
| 2 | 787 | Resistor_SMD:R_0603_1608Metric | R37, R73 |
| 2 | ADAPTOR_IN | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J3, J7 |
| 2 | Conn_02x08_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical_SMD | J19, J20 |
| 2 | IHLP5050FDER6R8M5A | Inductor_SMD:L_Vishay_IHLP-5050 | L1, L2 |
| 2 | KT-0805Y | LED_SMD:LED_0805_2012Metric | D15, D17 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D6, D7 |
| 2 | SN74LVC2G14DBV | Package_TO_SOT_SMD:SOT-23-6 | U1, U5 |
| 2 | SW_MEC_5E / C116501 | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW2 |
| 2 | TLV9002IPWR | Package_SO:VSSOP-8_3x3mm_P0.65mm | U8, U13 |
| 1 | 1000p | Capacitor_SMD:C_1206_3216Metric | C52 |
| 1 | 10uH/5A | Inductor_SMD:L_KOHERelec_MDA7030 | L3 |
| 1 | 12k8 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 13k7 | Resistor_SMD:R_0603_1608Metric | R92 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R90 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 560p | Capacitor_SMD:C_0603_1608Metric | C38 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U14 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q6 |
| 1 | ASR-M-5-0.5F | Library:R_3920 | R13 |
| 1 | BATT_IN | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_CUI_CMT-8504-100-SMT | BZ1 |
| 1 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J5 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | LM5066H1 | Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.05x7.56mm_ThermalVias | U3 |
| 1 | LMR51430XDDCR | Package_TO_SOT_SMD:SOT-23-6 | U15 |
| 1 | MCP4728 | Package_SO:MSOP-10_3x3mm_P0.5mm | U10 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | OUT_PC | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J6 |
| 1 | RED_IN | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J2 |
| 1 | SDT20B100D1-13 | Package_TO_SOT_SMD:TO-252-2 | D5 |
| 1 | SMFJ5.0CA | Diode_SMD:D_SOD-123F | D18 |
| 1 | SN74HCS02 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U9 |
| 1 | STM32G431CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U18 |
| 1 | STM32G431KBUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U21 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J13 |
| 1 | TLP175A | Package_SO:Toshiba_SOIC-4-6_4.4x3.6mm_P1.27mm | U2 |
Similar boards
- 2 layers90 × 60 mm

- 4 layers44.7 × 64.6 mm

Blinky
hdsjulian/sparkles-old
Autonomous blinky devices that triangulate via soundd
97 parts2Apache-2.0 - 4 layers196.5 × 100 mm

- 2 layers102 × 95 mm

- 2 layers90 × 98 mm

- 4 layers116.5 × 98 mm

Hw v1
Churrosoft/uEFI-v6.x
Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC
248 parts2 - 4 layers45 × 46 mm

Hapcan cc led driver
jankralx/hapcan_cc_led_driver
Hapcan constant current LED driver with 3 channels
40 parts - 2 layers103.5 × 52.7 mm

Driver
Joe7700487/Rubiks-Cube
This repository contains software and hardware work for a Rubik's Cube project: Python-based solvers and visualizers, a C++ solver prototype, firmware for a motorized mechanism, and KiCad PCB files.
16 parts
Questions
How big is the Power Supply PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Power Supply use?
318 parts, built around the TLV9002IPWR-MS, MCP4728-E/UN, LM74900QRGERQ1 and SN74LVC2G14DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power Supply KiCad files?
From the bernau01/zh_power_supply repository on GitHub, at the commit this page was made from: the board is PCB/Power Supply/Power Supply.kicad_pcb and its schematic PCB/Power Supply/Power Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power Supply design in my own project?
Its repository states no licence, so its author keeps all rights: ask bernau01 before reusing the design.