Skip to the content
12345678910

MCP4728-E/UN

Microchip TechnologyExtended

-40℃~+125℃ 12 2.7V~5.5V 2LSB 4 40nA 6us I2C Integrated buffer、Power-on reset、Power-down mode、Programmable gain Voltage Buffer MSOP-10 Digital to Analog Converters (DAC) ROHS

Part id
microchip/MCP4728-E/UN
Category
Digital To Analog Converters (DAC)
Package
MSOP-10
Pins
10
In stock
17,397 at JLCPCB (C478093)
Used on
88 open-source boards

Overview

The MCP4728-E/UN is a digital To Analog Converter made by Microchip Technology in a MSOP-10 package with 10 pins. -40℃~+125℃ 12 2.7V~5.5V 2LSB 4 40nA 6us I2C Integrated buffer、Power-on reset、Power-down mode、Programmable gain Voltage Buffer MSOP-10 Digital to Analog Converters (DAC) ROHS.

PCBKit's library has its KiCad symbol (Analog_DAC:MCP4728, from KiCad's library) and its footprint (Package_SO:MSOP-10_3x3mm_P0.5mm, from KiCad's library), ready for a KiCad board. 17,397 are in stock at JLCPCB (part C478093). 88 open-source boards in 70 repositories on GitHub use it.

Symbol

1VDD2SCL3SDA4LDAC5RDY/BSY6VOUTA7VOUTB8VOUTC9VOUTD10VSS
Analog_DAC:MCP4728From KiCad's library

Footprint

12345678910
Package_SO:MSOP-10_3x3mm_P0.5mmFrom KiCad's library

From the datasheet

14
Supply, least
2.7 V · VDD, recommended operating min · p. 3
Supply, most
5.5 V · VDD, recommended operating max · p. 3
Supply, least
4.5 V · VDD, High Speed Mode operating min · p. 10
Supply, absolute maximum
6.5 V · VDD, absolute max · p. 3
Works from
-40 °C · Operating ambient temperature min · p. 10
Works up to
125 °C · Operating ambient temperature max · p. 10
Junction, hottest
150 °C · Junction temperature absolute max · p. 3
Takes working
800 µA · VDD typical, external reference, 5.5 V, all four channels normal · p. 3
Takes at most
1.4 mA · VDD max, external reference, 5.5 V, all four channels normal · p. 3
Takes asleep
40 nA · Typical, external reference, all four channels powered down · p. 3
Takes asleep
45 µA · Typical, internal reference, all four channels powered down · p. 3
A pin gives at most
25 mA · Output pin source or sink absolute max · p. 3
Junction to air (10L-MSOP)
202 K/W · Junction to ambient typical · p. 10
Data rate, most
3.4 Mbit/s · I2C High Speed Mode max · p. 29

What it is and has

9
DAC
12-bit, four buffered voltage outputs · p. 1
Nonvolatile memory
EEPROM for DAC codes and I2C address bits · p. 1
Voltage reference
Internal or external selection · p. 1
Internal reference
2.048 V · p. 1
Output voltage range
0.000 V to 2.048 V, internal reference, gain 1 · p. 1
Output voltage range
0.000 V to 4.096 V, internal reference, gain 2 · p. 1
Operating modes
Normal or Power-Down · p. 1
I2C
Standard 100 kbit/s, Fast 400 kbit/s, High Speed 3.4 Mbit/s · p. 1
Package
10-lead MSOP · p. 1

Around it

5
cap 0.1 µF
between VDD and VSS; Ceramic bypass capacitor; place within 4 mm of VDD, in parallel with the 10 uF tantalum capacitor. · p. 21
cap 10 µF
between VDD and VSS; Additional tantalum capacitor in parallel with the ceramic bypass capacitor; place within 4 mm of VDD. · p. 21
res about 100 kΩ
between RDY/BSY and VDD; External pull-up for the open-drain EEPROM programming status output. · p. 21
res 5 kΩ to 10 kΩ
between SCL and VDD; Pull-up for Standard 100 kHz and Fast 400 kHz modes. · p. 21
res less than 1 kΩ
between SCL and VDD; Pull-up for High Speed 3.4 MHz mode. · p. 21

Specifications

62
ParameterConditionsAs printedPage
VDD VDDmax 6.5 V3
All inputs and outputs w.r.t VSSmin -0.3 V3
Storage Temperaturemin -65 · max 150 °C3
Ambient Temp. with Power Appliedmin -55 · max 125 °C3
ESD protection on all pinsHBMmin 4 kV3
ESD protection on all pinsMMmin 400 V3
Maximum Junction Temperature TJmax 150 °C3
Operating Voltage VDDmin 2.7 · max 5.5 V3
Supply Current with External Reference (VREF = VDD) IDD_EXTVREF = VDD, VDD = 5.5V; all 4 channels in Normal mode; Note 1typ 800 · max 1400 uA3
Supply Current with External Reference (VREF = VDD) IDD_EXT3 channels in Normal mode, 1 channel powered down; Note 1typ 600 uA3
Supply Current with External Reference (VREF = VDD) IDD_EXT2 channels in Normal mode, 2 channels powered down; Note 1typ 400 uA3
Supply Current with External Reference (VREF = VDD) IDD_EXT1 channel in Normal mode, 3 channels powered down; Note 1typ 200 uA3
Power-Down Current with External Reference IPD_EXTAll 4 channels powered down; VREF = VDDtyp 40 nA3
Supply Current with Internal Reference (VREF = Internal) IDD_INTVREF = Internal Reference; VDD = 5.5V; all 4 channels in normal mode; Note 1typ 800 · max 1400 uA3
Supply Current with Internal Reference (VREF = Internal) IDD_INT3 channels in Normal mode, 1 channel powered down; Note 1typ 600 uA3
Supply Current with Internal Reference (VREF = Internal) IDD_INT2 channels in Normal mode, 2 channels powered down; Note 1typ 400 uA3
Supply Current with Internal Reference (VREF = Internal) IDD_INT1 channel in Normal mode, 3 channels powered down; Note 1typ 200 uA3
Power-Down Current with Internal Reference IPD_INTAll 4 channels powered down; VREF = Internal Referencetyp 45 · max 60 uA3
Power-on Reset Threshold Voltage VPORAll circuits, including EEPROM, are ready to operate.typ 2.2 V4
Power-Up Ramp Rate VRAMPNote 2, Note 4min 1 V/s4
Resolution nCode Change: 000h to FFFhmin 12 Bits4
DNL Error DNLNote 5min -0.75 LSB4
Offset Error VOSCode = 000h; See Figure 2-24typ 5 · max 20 mV4
Gain Error GECode = FFFh; offset error not included; typical at room temperature; See Figure 2-25min -1.25 · typ 0.4 · max 1.25 % of FSR4
Gain Error Drift ΔGE/°Ctyp -3 ppm/°C4
Internal Voltage Reference VREFNote 3min 2.007 · typ 2.048 · max 2.089 V4
Temperature Coefficient ΔVREF/°C-40 to 0°C; Note 3typ 125 ppm/°C4
Temperature Coefficient ΔVREF/°C-40 to 0°C; Note 3typ 0.25 LSB/°C4
Temperature Coefficient ΔVREF/°C0 to +125°C; Note 3typ 45 ppm/°C4
Temperature Coefficient ΔVREF/°C0 to +125°C; Note 3typ 0.09 LSB/°C4
Reference Output Noise ENREFCode = FFFh; 0.1 – 10 Hz, Gx = 1; Note 3typ 290 uVp-p4
Output Noise Density eNREFCode = FFFh, 1 kHz, Gx = 1; Note 3typ 1.2 uV HZ4
Output Noise Density eNREFCode = FFFh, 10 kHz, Gx = 1; Note 3typ 1 uV HZ4
1/f Corner Frequency fCORNERNote 3typ 400 Hz4
Output Voltage Settling Time TSETTLINGNote 8: within 1/2 LSB of final value for code change from 1/4 to 3/4 full scaletyp 6 us5
Analog Output Time Delay from Power-Down Mode TdExPDVDD = 5V; Note 4, Note 9typ 4.5 us5
Time delay to settle to new reference TdREFFrom External to Internal Reference; Note 4, Note 6typ 26 us5
Time delay to settle to new reference TdREFFrom Internal to External Reference; Note 4, Note 6typ 44 us5
Power Supply Rejection PSRRVDD = 5V ±10%, VREF = Internaltyp -57 dB5
Capacitive Load Stability CLRL = 5 kΩ; No oscillation, Note 4max 1000 pF5
Slew Rate SRtyp 0.55 V/us5
Phase Margin pMCL = 400 pF, RL = ∞typ 66 Degree (°)5
Short Circuit Current ISCVDD = 5V; all VOUT pins grounded; tested at room temperaturetyp 15 · max 24 mA5
DC Output Impedance ROUTNormal mode; Note 4typ 1 Ω5
DC Output Impedance ROUTPower-Down mode 1; PD1:PD0 = 0:1; VOUT to VSS; Note 4typ 1 kΩ5
DC Output Impedance ROUTPower-Down mode 2; PD1:PD0 = 1:0; VOUT to VSS; Note 4typ 100 kΩ5
DC Output Impedance ROUTPower-Down mode 3; PD1:PD0 = 1:1; VOUT to VSS; Note 4typ 500 kΩ5
Major Code Transition Glitch1 LSB code change around major carry (from 7FFh to 800h); Note 4typ 45 nV-s6
Output Low Voltage VOLIOL = 3 mA; SDA and RDY/BSY pinsmax 0.4 V6
Pin Capacitance CPINNote 4max 3 pF6
EEPROM Write Time TWRITEEEPROM write timetyp 25 · max 50 ms6
Data RetentionAt +25°C, Note 3typ 200 Years6
LDAC Low Time TLDACUpdates analog outputs (Note 3)min 210 ns6
Bus Free Time TBUFStandard Mode; Note 5min 4700 ns10
Bus Free Time TBUFFast Mode; Note 5min 1300 ns10
Input Filter Spike Suppression (SDA and SCL) TSPFast Mode; Not Testedtyp 50 ns10
Input Filter Spike Suppression (SDA and SCL) TSPHigh Speed Mode 1.7; Not Testedtyp 10 ns10
Input Filter Spike Suppression (SDA and SCL) TSPHigh Speed Mode 3.4; Not Testedtyp 10 ns10
Specified Temperature Range TAmin -40 · max 125 °C10
Operating Temperature Range TAmin -40 · max 125 °C10
Storage Temperature Range TAmin -65 · max 150 °C10
Thermal Resistance, 10L-MSOP θJA10L-MSOPtyp 202 °C/W10

Pins, by the datasheet

10
1 VDD
Supply voltage and DAC external reference input. · p. 21
2 SCL
I2C serial clock input; requires an external pull-up to VDD. · p. 21
3 SDA
I2C serial data input and open-drain output; requires an external pull-up to VDD. · p. 21
4 LDAC
Synchronization input transferring DAC input registers to output registers; also selects the device for reading and writing I2C address bits. · p. 21
5 RDY/BSY
EEPROM programming status indicator; requires about 100 kΩ pull-up to VDD. · p. 21
6 VOUT A
Buffered rail-to-rail analog voltage output of channel A. · p. 21
7 VOUT B
Buffered rail-to-rail analog voltage output of channel B. · p. 21
8 VOUT C
Buffered rail-to-rail analog voltage output of channel C. · p. 21
9 VOUT D
Buffered rail-to-rail analog voltage output of channel D. · p. 21
10 VSS
Ground reference and current return; connect to a ground plane through a low-impedance connection. · p. 21

Open-source boards using it

88See all 88
  • 4 layers70.8 × 108 mmCastor and Pollux, the printed circuit board in 3D

    Castor and Pollux

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    235 parts587
  • 2 layers191.5 × 76 mmPcb project, the printed circuit board in 3D

    Pcb project

    CrashOverride85/zc95

    4 channel EStim box inspired by the mk312bt, with Lua scripting support

    337 parts117GPL-3.0
  • 2 layers99.1 × 99.1 mmPower supply panelized, the printed circuit board in 3D

    Power supply panelized

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    223 parts75
  • 2 layers58.4 × 108.7 mmCircuit pcb, the printed circuit board in 3D

    Circuit pcb

    Testbild-synth/dual-vcadsr

    Dual Voltage controlled envelope/LFO/Random (Sample/hold) eurorack module

    69 parts14
  • 4 layers89 × 61 mmBlocky breakout pcb, the printed circuit board in 3D

    Blocky breakout pcb

    o7-machinehum/RTShield

    Breakout board for a RPi.

    95 parts13
  • 2 layers58 × 109 mmWaft, the printed circuit board in 3D

    Waft

    AudioMorphology/waft

    Eurorack Gesture Controller

    65 parts12
  • 2 layers90.2 × 109.9 mmCircuit pcb smd dac, the printed circuit board in 3D

    Circuit pcb smd dac

    Testbild-synth/super-sweet-16

    Deluxe 16-step knob-per-function sequencer Module for eurorack

    163 parts12MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP4728-E/UN?

Yes. The symbol is Analog_DAC:MCP4728 and the footprint Package_SO:MSOP-10_3x3mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP4728-E/UN?

MSOP-10, with 10 pins. Its footprint is drawn on this page.

Where is the MCP4728-E/UN datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP4728-E/UN?

JLCPCB lists it as part C478093, with 17,397 in stock; the sellers' links on this page open their listings.

What can replace the MCP4728-E/UN?

Parts like it in the library: the CJC4344H by ESHINE, the GC4344 by SX-globalchip, the MS4344 by Hangzhou Ruimeng Tech and the MS5314 by Hangzhou Ruimeng Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP4728-E/UN?

88 boards in 70 repositories on GitHub; the most starred are listed on this page, with their KiCad files.