
OPL2 VGM Player
AidanHockey5/YM3812_VGM_Player
A Video Game Music player based on the YM3812 (OPL2) and Teensy 3.5
Boards in 33 GitHub repositories, designed in KiCad, that use the LM358N by HGSEMI (-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHS). See how each wires it, with its parts, size, README and files; the LM358N’s symbol, footprint and pinout are on its own page.

AidanHockey5/YM3812_VGM_Player
A Video Game Music player based on the YM3812 (OPL2) and Teensy 3.5





kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included



drtrigon/eagle
Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

dtpisanty/dmx2motion
An open-hardware project to control varing frequency AC motror drivers through DMX, ArtNet, OSC and MQTT

EngLuizs/Fonte_Linear_12V
Fonte linear regulada ajustável (12V/1A) com telemetria digital integrada. Desenvolvida com ESP32, KiCad e PlatformIO para monitoramento local (LCD) e remoto (Web Server Wi-Fi).

krauser01/portafolio-electronica-eric-rv
Portafolio Proyectos de Electrónica Ing. Eric Rodriguez Vasquez



SjulsonLab/analog_SWR_detection
This repository contains the schematics and PCB design of a circuit that implements a set of filters for sharp wave-ripple detection. It consists of a band-pass filter followed by an envelope low-pass filter.

alexandercote/Alarm_Clock_Audio_Amp
Design class project where I worked in a group of 3 to implement a music playing alarm clock using a microcontroller board.



FrizzyElectronics/Line-follower-sensor
Line follower sensor module with 3Pin connector

Jonny999999/electric-kart
Firmware and pcb's for custom built electric kart

Jonny999999/throttle-tune
onversion of an old gasoline lawn tractor to an electric vehicle


RickNYC12345/James-Swarbrigg-Overpressure-Cutout
This is the KiCAD design to create a PCB for James' pressure experiment
