

Currentandvolt.pcb
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 51
- Pads
- 119
- Tracks, vias
- 136, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Mar 2025
- Updated
- 15 Mar 2025
Overview
Currentandvolt.pcb is an open-source printed circuit board by KanyakornPuengmon, from the KanyakornPuengmon/PCB repository on GitHub. It is a 2-layer board with 25 parts on 51 nets, routed with 136 tracks and 0 vias.
It is built around the LM358, LM358N and ZMPT101B. Its parts include 11 resistors, 7 capacitors and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
3LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierLM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational AmplifierZMPT101B
插件0.2% 1:1 2mA 2mA 4P 4kV Straight Voltage Transformer 插件 Current Sense Transformers ROHSZHE MING LANG XICurrent Sense Transformers
README
README.mdPCB
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R8, R9, R10 |
| 3 | 1 nF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C3, C5 |
| 2 | 1 µF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2, C4 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R11 |
| 2 | LM358 | Package_DIP:DIP-8_W7.62mm_LongPads | U3, U5 |
| 2 | LM358N | Package_DIP:DIP-8_W7.62mm_LongPads | U1, U2 |
| 1 | 0.1 µF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C6 |
| 1 | 1 nF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C7 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal | R7 |
| 1 | 820K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | ACS712xLCTR-20A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | ESP32-DEVKITC-32D | ESP32-DEVKITC-32D:MODULE_ESP32-DEVKITC-32D | U4 |
| 1 | ZMPT101B | Transformer_THT:Transformer_Zeming_ZMPT101K | T1 |
Similar boards
- 2 layers83.8 × 94.6 mm

- 2 layers115.9 × 45.4 mm

- 2 layers115.9 × 45.4 mm

Smart Energy meter
kaviyarasu-s-ece/Voltage-and-Current-Sensor
This circuit will detect the change in current voltage variation. It will send the analog signal to esp32 circuit which used for live monitoring
43 parts - 4 layers160.4 × 76.9 mm

Smartswitch board
Arhamee/hardware-portfolio
Multi-layer PCB designs in KiCad 10 schematic capture to fabrication-ready Gerbers. High-speed routing, BGA escape, power electronics.
116 partsMIT - 2 layers25 × 30 mm

- 2 layers

- 2 layers99.6 × 69.8 mm

- 2 layers53.9 × 88 mm

LurCotte
LurCotte/Smart-Home-Electronic-Safety-and-Monitoring-System
Proyek ini bertujuan untuk mengembangkan sistem automasi rumah pintar (Smart Home Automation System) yang dapat memantau dan mengontrol peralatan elektronik secara real-time.
12 parts1
Questions
What parts does the Currentandvolt.pcb use?
25 parts, built around the LM358, LM358N and ZMPT101B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Currentandvolt.pcb KiCad files?
From the KanyakornPuengmon/PCB repository on GitHub, at the commit this page was made from: the board is power.pcb/currentandvolt.pcb.kicad_pcb and its schematic power.pcb/currentandvolt.pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Currentandvolt.pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask KanyakornPuengmon before reusing the design.