

PCB FLM FTE-12V
Fonte linear regulada ajustável (12V/1A) com telemetria digital integrada. Desenvolvida com ESP32, KiCad e PlatformIO para monitoramento local (LCD) e remoto (Web Server Wi-Fi).
- Size
- 120 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 36
- Pads
- 142
- Tracks, vias
- 228, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 9 May 2026
- Updated
- 2 Jun 2026
Overview
PCB FLM FTE-12V is an open-source printed circuit board by EngLuizs, from the EngLuizs/Fonte_Linear_12V repository on GitHub, published under the MIT licence. It is a 2-layer board of 120 × 75 mm with 55 parts on 36 nets, routed with 228 tracks and 12 vias.
It is built around the ESP32-WROOM-32E-N8, LM358N and 0.1UF 50V 5*11, with the BC547, 1N4744A and LM7812 among its other parts. Its parts include 13 capacitors, 11 resistors, 6 diodes, 5 connectors and 4 transistors. It belongs with the ESP32 boards of this library.
Main components
8ESP32-WROOM-32E-N8
SMD,25.5x18mm-40℃~+85℃ -98dBm 112mA 2.4GHz 20dBm 239mA 3V~3.6V Bluetooth4.2 ESP32-DOWD-V3 On-board PCB Antenna UART、SDIO、SPI、I2C、GPIO、PWM、I2S SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational Amplifier0.1UF 50V 5*11
插件,5x11mm1000hrs@105℃ 100nF 11mm 1A@100kHz 2mm 50V 5mm 插件,5x11mm Aluminum Electrolytic Capacitors - Leaded ROHSCXAluminum Electrolytic Capacitors - LeadedBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)1N4744A
DO-41GZener DiodesLGELM7812
TO-263TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIUncategorisedSS36
SMA(DO-214AC)-55℃~+125℃ 3A 500uA@60V 60V 700mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesTIP120
TO-220-55℃~+150℃ 200uA 2V@3A,12mA 2W 5A 5V 60V NPN TO-220 Darlington Transistors ROHSJiangsu Changjing Electronics Technology (CJ)Darlington Transistors
README
README.mdFONTE LINEAR AJUSTÁVEL 12V 1A COM MONITORAMENTO
Projeto desenvolvido pela equipe FLM System utilizando ESP32, KiCad e PlatformIO para controle, monitoramento e interface web de uma fonte linear regulada ajustável.
Descrição do Projeto
O projeto consiste em uma fonte linear ajustável de até 12V e 1A com:
- Monitoramento de tensão, corrente e potência
- Interface Web via ESP32
- Display LCD I2C 20x4
- Medição analógica calibrada
- Indicação visual por LED
- PCB dedicada desenvolvida no KiCad
- Controle e aquisição utilizando ESP32-WROOM-32E
O sistema disponibiliza os dados em tempo real tanto no display LCD quanto em uma página web hospedada diretamente pelo ESP32 em modo Access Point.
Funcionalidades
- Leitura de tensão de saída
- Leitura de corrente utilizando resistor shunt
- Cálculo automático de potência
- Web Server integrado
- Interface Web responsiva
- Calibração de tensão e corrente
- LEDs indicadores de status
- Comunicação I2C com display LCD
- Sistema de proteção visual por sobrecorrente
Hardware Utilizado
Processador
- ESP32-WROOM-32E
Reguladores
- LM7812
- LM2576
- LD1117
Componentes principais
- LM358
- TIP120
- BC547
- LCD I2C 20x4
- Shunt 0.22Ω / 5W
- Shunt 0,33Ω / 5W
Estrutura do Projeto
Firmware/ -> Código fonte do ESP32
Hardware/ -> Esquemáticos, PCB e Gerbers
Documentação/ -> Relatórios e documentação
Estrutura/ -> Estruturas e peças mecânicasFirmware
O firmware foi desenvolvido utilizando:
- Visual Studio Code
- PlatformIO
- Framework Arduino para ESP32
Principais bibliotecas
- Arduino.h
- Wire.h
- LiquidCrystal_I2C
- WiFi.h
- WebServer.h
Interface Web
O ESP32 opera em modo Access Point criando a rede:
SSID: FLM_FTE12V
Senha: 11110000Após conexão, o sistema disponibiliza:
- Página web embarcada
- Dados em JSON
- Monitoramento em tempo real
Monitoramento
O sistema realiza:
- Média de amostras ADC
- Filtragem sincronizada em 60Hz
- Correção de offset
- Calibração linear de tensão e corrente
PCB e Projeto Eletrônico
O projeto eletrônico foi desenvolvido no:
- KiCad
Incluindo:
- Esquemático completo
- PCB dedicada
- Gerbers de fabricação
- Instrumentação analógica
- Fonte linear regulada
- Conversores DC-DC auxiliares
Organização de Versionamento
Este projeto utiliza:
- Git
- GitHub
Para:
- Controle de revisões
- Histórico de alterações
- Backup
- Versionamento de firmware e PCB
Equipe
FLM System
Versão Atual
Versão Firmware: 0.02.01
Última Revisão: 01/05/2026Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0,1uF/50V | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C4, C9, C10, C11, C13 |
| 4 | 1N5406 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1, D2, D3, D4 |
| 4 | Furo 3mm | PCB-GERAL:Furo 3mm | Furo11, Furo11, Furo11, Furo11 |
| 3 | 10K 1/4W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9, R13 |
| 3 | BC547 | PCB-DISCRETO:TRANSP(CBE)_BC547 | Q2, Q3, Q4 |
| 2 | 0,22R/5W | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical | R6, R7 |
| 2 | 100uF/25V | PCB-DISCRETO:CAP100UF25V | C3, C8 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | RF1, RG1 |
| 2 | 4700uF/35V | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C1, C5 |
| 2 | AKZ700-2-5,08V | PCB-CONECTOR:AKZ300-2-5.08 | CN1, CN2 |
| 1 | 0,33R/5W | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical | R2 |
| 1 | 1000uF/25V | PCB-DISCRETO:CAP_1000UF_50V | C6 |
| 1 | 100uF/50V | PCB-DISCRETO:CAP100UF25V | C7 |
| 1 | 100uH | PCB-GERAL:74477120 | L1 |
| 1 | 10uF/16V | PCB-DISCRETO:CAP100UF25V | C12 |
| 1 | 11K | PCB-DISCRETO:POTENCIOMETRO | RV1 |
| 1 | 14K 1/4W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 150R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 180R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 1K 1/4W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 1N4744A | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D5 |
| 1 | 330R 1/4W | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | BPSC-2 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | BPSC-4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32E-N8 | PCB-GERAL:ESP32-WROOM-32E-N8 | U1 |
| 1 | KFC-A06 4,3 | PCB-GERAL:PUSHBOTON | ST1 |
| 1 | LD1117DT33TR | PCB-CI:DPAK_LD1117 | REG3 |
| 1 | LED Bicolor R/G 5mm | PCB-DISCRETO:LED5MM_BICOLOR_K | LD1 |
| 1 | LM2576D2TR4-5G | PCB-CI:D2PAK-5 | REG2 |
| 1 | LM358N | PCB-CI:DIP8 | U2 |
| 1 | LM7812 | PCB-CI:LM78XX | REG1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCS-6 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | SS36 | PCB-DISCRETO:DO-214AA_SMB_J-BEND | D6 |
| 1 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
Similar boards
- 2 layers127 × 127 mm

- 2 layers100 × 100 mm

QRPAmplifier
profdc9/QRPAmplifier
Layout of WA2EBY amplifier in Kicad, licensed CC-BY-SA 4.0
133 parts26 - 2 layers85 × 90 mm

- 2 layers278 × 135 mm

- 2 layers150 × 120 mm

HydrogelBioprinter
SimonDaniel605/Hydrogel-3D-Printer
Development of a custom hydrogel 3D printer for tissue engineering and research applications for Stellenbosch University.
174 partsMIT - 2 layers249.4 × 122 mm

PCB Controller
Sutthiphong-H/project-flip-disc
FlipDisc Project was made for education of Project. Chadsadakorn Piriyasiriphan Jadesalit Suriyanimitsuk Sutthiphong Hongkham
159 parts - 2 layers64 × 64 mm

Cmd power
bpmine/minou_uino
Les programmes de cette base gèrent la cabane de notre minou (voir images suivantes).
38 parts - 2 layers65.6 × 56.5 mm

Questions
How big is the PCB FLM FTE-12V PCB?
It measures 120 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB FLM FTE-12V use?
55 parts, built around the ESP32-WROOM-32E-N8, LM358N, 0.1UF 50V 5*11 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB FLM FTE-12V KiCad files?
From the EngLuizs/Fonte_Linear_12V repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/PCB-FLM-FTE-12V.kicad_pcb and its schematic Hardware/PCB/PCB-FLM-FTE-12V.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB FLM FTE-12V design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).