4 layers198 × 88 mm
4 layers183 × 165 mm
PFC2k5W
namcho/PFC2k5W1Power Factor Corrector core board.
- Size
- 183 × 165 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 46
- Pads
- 233
- Tracks, vias
- 678, 40
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 May 2018
- Updated
- 28 Jun 2018
Overview
PFC2k5W is an open-source printed circuit board by namcho, from the namcho/PFC2k5W repository on GitHub. It is a 4-layer board of 183 × 165 mm with 88 parts on 46 nets, routed with 678 tracks and 40 vias.
It is built around the 1EDI60N12AF, LM358N and UCC3818N, with the C5D50065D, IDW75E60 and IRF540N among its other parts. Its parts include 36 resistors, 22 capacitors, 9 connectors, 8 diodes and 3 ICs.
Main components
6
1EDI60N12AF
SO-8-40℃~+125℃ 1 10A 10V~35V 120ns 125ns 4ns 5ns 650uA 9.4A MOSFET Under Voltage Protection、Short Circuit Protection SO-8 Gate Drivers ROHSInfineon TechnologiesGate Drivers
LM358N
DIP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 30mA 3V~36V 50nA 7mV 800uA 80dB Built-in compensation DIP-8 Operational Amplifier ROHSHGSEMIOperational Amplifier
UCC3818N
PDIP-16-40℃~+85℃ 10.8V~15V 1W 85kHz~115kHz 95% Boost CRM Non-Isolated Over Voltage Protection、Under Voltage Protection、Soft-start PDIP-16 PFC Controllers ROHSTexas InstrumentsAC-DC Controllers And Regulators
C5D50065D
TO-247AC-31.8V@50A 100A 650V TO-247AC-3 SiC Diodes ROHSWolfspeedSchottky Barrier Diodes (SBD)
IDW75E60
TO-247AC-3-55℃~+175℃@(Tvj) 1.65V@75A 120A 121ns 40uA@600V 600V Independent TO-247AC-3 Fast Recovery / High Efficiency Diodes ROHSInfineon TechnologiesDiodes - Fast Recovery Rectifiers
IRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETs
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | R_Small | Resistors_SMD:R_0805_HandSoldering | R3, R4, R5, R6, R10, R13, R15, R20, R22, R23, R24, R33, R34, R35, R36, R37 +1 |
| 9 | C_Small | Capacitors_SMD:C_0805_HandSoldering | C5, C6, C7, C8, C10, C11, C17, C18, C20 |
| 8 | R_Small | Resistors_SMD:R_1206_HandSoldering | R14, R19, R25, R26, R27, R28, R29, R30 |
| 6 | SCREW | NamchoLibs:SCREW_3mm | MP1, MP2, MP3, MP4, MP5, MP6 |
| 4 | 0.003 | Resistors_SMD:R_2512_HandSoldering | R8, R9, R11, R12 |
| 3 | 1u | Capacitors_SMD:C_1206_HandSoldering | C12, C16, C28 |
| 3 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P3, P6, P8 |
| 3 | ZENERsmall | Diodes_SMD:D_SOD-123 | D4, D6, D8 |
| 2 | 100u | Capacitors_SMD:CP_Elec_8x10 | C1, C13 |
| 2 | 10k | Resistors_SMD:R_1206_HandSoldering | R31, R32 |
| 2 | 10n | Capacitors_SMD:C_0805_HandSoldering | C14, C29 |
| 2 | 250u | NamchoLibs:C_MKP_Vishay_70x65x57.5 | C15, C19 |
| 2 | 4R7 | Resistors_SMD:R_2512_HandSoldering | R16, R17 |
| 2 | BAS40-00 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | D2, D3 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P7, P9 |
| 2 | CONN_02X02 | NamchoLibs:Conn_4pins_15A | P4, P5 |
| 2 | CONN_02X03 | NamchoLibs:Conn_6pins_30A | P1, P2 |
| 2 | CP1_Small | Capacitors_SMD:C_1206_HandSoldering | C4, C9 |
| 2 | Q_NMOS_GDS | TO_SOT_Packages_THT:TO-247_TO-3P_Vertical | Q1, Q2 |
| 1 | 0 | Resistors_SMD:R_0805_HandSoldering | R21 |
| 1 | 100n | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 1EDI60N12AF | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | 382k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 383k | Resistors_SMD:R_1206_HandSoldering | R2 |
| 1 | C | Capacitors_ThroughHole:C_Rect_L10.0mm_W4.0mm_P7.50mm_MKS4 | C3 |
| 1 | C5D50065D | TO_SOT_Packages_THT:TO-247_TO-3P_Vertical | D7 |
| 1 | CrydomM50 | NamchoLibs:CrydomM50x_Fixed | D1 |
| 1 | IDW75E60 | TO_SOT_Packages_THT:TO-247_TO-3P_Vertical | D5 |
| 1 | INDUCTOR_2 | NamchoLibs:OD_77.80xID_39.34xHT_25.85_Horizantal | L1 |
| 1 | IRF540N | TO-220 | Q3 |
| 1 | LM358N | NamchoLibs:SOIC-8-N | U3 |
| 1 | UCC3818 | Housings_SOIC:SOIC-16W_7.5x10.3mm_Pitch1.27mm | U1 |
More from namcho/PFC2k5W
2- 2 layers
Similar boards
- 4 layers71.8 × 109.5 mm
MCC22
ZeniteSolar/MCC22
Follow the steps below, if any value differs from the expected, abort the test. Power off and on after each step. Always limit the power source to 18V at 100mA. Use this link to find components on the board.
245 parts1 - 4 layers
- 2 layers56.5 × 64.8 mm
OPL2 VGM Player
AidanHockey5/YM3812_VGM_Player
A Video Game Music player based on the YM3812 (OPL2) and Teensy 3.5
14 parts72AGPL-3.0 - 2 layers140 × 65 mm
- 2 layers97.6 × 76.8 mm
- 2 layers127 × 127 mm
- 2 layers100.3 × 80 mm
- 2 layers95.9 × 129.5 mm
Solderin Station
kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included
73 parts3GPL-2.0
Questions
How big is the PFC2k5W PCB?
It measures 183 × 165 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PFC2k5W use?
88 parts, built around the 1EDI60N12AF, LM358N, UCC3818N and C5D50065D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PFC2k5W KiCad files?
From the namcho/PFC2k5W repository on GitHub, at the commit this page was made from: the board is PFC2k5W.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PFC2k5W design in my own project?
Its repository states no licence, so its author keeps all rights: ask namcho before reusing the design.