
Boards using the ESP32-S2
38 boardsBoards in 29 GitHub repositories, designed in KiCad, that use the ESP32-S2 by Espressif Systems (-40℃~+125℃ -97dBm 135mA 150Mbps 2.4GHz 2.4GHz~2.4835GHz 2.8V~3.6V 63mA DMA function SPI、UART、I2C、I2S WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHS). See how each wires it, with its parts, size, README and files; the ESP32-S2’s symbol, footprint and pinout are on its own page.
- 2 layers139 × 59 mm

- 2 layers35 × 35 mm

- 4 layers60 × 33 mm

- 4 layers30 × 30 mm

- 4 layers26 × 29 mm

- 4 layers67 × 54 mm

ESP32 SIFIVE 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
81 parts15 - 2 layers60 × 50 mm

- 4 layers17.8 × 53.4 mm

ESPHMI
maglash64/ESP32-S2-DEV
ESP32-S2 Dev Board (Designed for Manufacturing) JLCPCB 2313 4-Layer Controlled Impedence Stackup All Components Available on LCSC. Features: 128Mb FLASH. USB-C Connector for Programming All Usable GPIOs exposed.
39 parts9 - 2 layers63.5 × 36.5 mm

SofTub
steve1066d/softub-wifi
An adapter board for Softub that provides wifi access, along with other features
9 parts9GPL-2.0 - 4 layers38.1 × 101.6 mm

ESP32S2 Audio
emeb/ESP32S2_Audio
A Eurorack module demonstrating the use of the ESP32S2 as an audio effects processor
124 parts8MIT - 2 layers27.9 × 27.9 mm

Esp32-shield
sensestage/wind-instrument-building
Files for wind instrument building workshops
8 parts3GPL-3.0 - 4 layers40 × 50.5 mm

Esp32-devboard
AYUSH-pro-grammer/esp32-devboard
Development board built using Espressif ESP32-S2FH4 with USB-C, two WS2812B LEDs, 3.3V LDO and GPIO headers, which have 15 pins on both sides.
35 parts1 - 4 layers60 × 85 mm

VehicleVCU PCB
nsm81/VehicleVCU_PCB
A Vehicle Control Unit provides multiple CANBUS transceivers for communication within a vehicle.
86 parts1 - 2 layers126 × 194.9 mm

- 2 layers52.3 × 40.6 mm

Zamonaryboard
zamonary1/zamonarypad
Low-latency capacitive touch osu keyboard, esp32-s2 based
26 parts1 - 2 layers

- 4 layers47 × 67.3 mm

- 2 layers23.4 × 45.4 mm

Esp32-s2-dev
cyao1234/e32
This is a single board esp32-s2 development board. with two neopixels and an on-board antenna.
31 parts - 2 layers37.5 × 80 mm

PCB IA
DanRelief/Projeto-IA
Projeto de IA usando Algoritmo Genético para roteamento de componentes em PCBs
6 parts - 4 layers75 × 65 mm

- 4 layers99 × 60 mm

Grip strength meter
houseofbigseals/grip_strength_meter_pcb
schematic and pcb for custom esp32 grip strength meter project
123 parts - 4 layers109.8 × 145 mm

- 2 layers59 × 34 mm

Iot postbox v1
paclema/iot-postbox
Integrated open-source HW and FW for an IoT smart mailbox sensor with Wi-Fi and LoRaWAN connectivity.
87 parts - 2 layers22.9 × 41.3 mm

Esp32-s2 corebase
pedrominatel/esp32-s2_corebase
This is the base template for the ESP32-S2 SoC projects.
46 partsGPL-3.0