Skip to the content
2 layers139 × 59 mmEsp32s2-nixiehost, the printed circuit board in 3D

Esp32s2-nixiehost

cnlohr/cnixxi151

My experiment with nixie tubes.

Size
139 × 59 mm
Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
70
Pads
259
Tracks, vias
528, 119
Pours
268
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
23 Jan 2023
Updated
4 Aug 2025

Overview

Esp32s2-nixiehost is an open-source printed circuit board by cnlohr, from the cnlohr/cnixxi repository on GitHub, published under the MIT licence. It is a 2-layer board of 139 × 59 mm with 60 parts on 70 nets, routed with 528 tracks and 119 vias.

It is built around the ESP32-S2, ME6206A36M3G and TS-1187A-B-A-B. Its parts include 18 connectors, 15 capacitors, 12 resistors, 2 ICs and 2 diodes. It belongs with the lEDs and displays boards and the ESP32 boards of this library.

Main components

3

README

README.md

cnixxi

My experiment with nixie tubes.

It uses a ch32v003 to both control the nixie tube's cathodes, as well as provide the 180V supply for the nixie tube.

Youtube video:

Powering Nixies off USB with a 10¢ Micro

Schematic:

schematic

Board:

board

Parts

60
QtyValueFootprintReferences
610kResistor_SMD:R_0402_1005MetricR2, R3, R4, R5, R11, R12
6TOUCHTouchPadTest:TouchExposed6T1, T2, T3, T4, T5, T6
510pCapacitor_SMD:C_0402_1005MetricC3, C4, C5, C6, C7
40.1u16vCapacitor_SMD:C_0402_1005MetricC10, C11, C13, C15
45.1kResistor_SMD:R_0402_1005MetricR1, R6, R9, R10
4~MountingHole:MountingHole_3.5mm_PadJ15, J16, J17, J18
21uCapacitor_SMD:C_0402_1005MetricC8, C12
222Resistor_SMD:R_0402_1005MetricR7, R8
2NPCapacitor_SMD:C_0402_1005MetricC1, C2
110uCapacitor_SMD:C_0402_1005MetricC9
110uCapacitor_SMD:C_0603_1608MetricC14
132.786kCrystal:Crystal_SMD_2012-2Pin_2.0x1.2mmY2
140MHzCrystal:Crystal_SMD_2016-4Pin_2.0x1.6mmY1
16.8nHInductor_SMD:L_0402_1005MetricL1
1ANTResistor_SMD:R_1206_3216MetricA1
1ESP32-S2localparts:ESP32S2U1
1ME6206A36M3GPackage_TO_SOT_SMD:SOT-23U2
1OUTPUTPINS0Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMDJ3
1OUTPUTPINS1Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMDJ4
1OUTPUTPINS2Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMDJ5
1OUTPUTPINS3Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMDJ6
1OUTPUTPINS4Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMDJ12
1OUTPUTPINS5Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMDJ11
1OUTPUTSLOTS0nixiehostslot:nixiehostslotJ7
1OUTPUTSLOTS1nixiehostslot:nixiehostslotJ8
1OUTPUTSLOTS2nixiehostslot:nixiehostslotJ9
1OUTPUTSLOTS3nixiehostslot:nixiehostslotJ10
1OUTPUTSLOTS4nixiehostslot:nixiehostslotJ14
1OUTPUTSLOTS5nixiehostslot:nixiehostslotJ13
1PGMConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1SCHDiode_SMD:D_SOD-123FD2
1TS-1187A-B-A-BButton_Switch_SMD:SW_SPST_TL3342SW1
1USBLC6-2P6-TVSPackage_TO_SOT_SMD:SOT-666D1
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

More from cnlohr/cnixxi

1
  • 2 layers22 × 38.3 mmNixitest1, the printed circuit board in 3D

    Nixitest1

    cnlohr/cnixxi

    My experiment with nixie tubes.

    34 parts151MIT

Similar boards

  • 2 layers22 × 56 mmEsp32s2-funprog, the printed circuit board in 3D

    Esp32s2-funprog

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    49 parts114
  • 2 layers35 × 35 mmExposed power rails, the printed circuit board in 3D

    Exposed power rails

    cnlohr/esp32s2-cookbook

    Low-level tests with the ESP32-S2

    37 parts132MIT
  • 4 layers60 × 33 mmMIG Dumper, the printed circuit board in 3D

    MIG Dumper

    sabogalc/MIG-Flash-PCBs

    MIG Dumper and Flashcart PCB files in KiCad

    73 parts69WTFPL
  • 4 layers30 × 30 mmWiSer TTL, the printed circuit board in 3D

    WiSer TTL

    bitmerse/WiSer

    WiSer: Bringing wireless convenience to serial connectivity

    75 parts52
  • 4 layers67 × 54 mmESP32 SIFIVE 00, the printed circuit board in 3D

    ESP32 SIFIVE 00

    probe-rs/hive

    A Raspberry PI shield for testing probe-rs against many chips & probes.

    81 parts15
  • 2 layers60 × 50 mmWactrollerLogic, the printed circuit board in 3D

    WactrollerLogic

    hykilpikonna/OpenHardware

    Open-sourced Hardware Experimentation <3

    36 parts10
  • 4 layers17.8 × 53.4 mmESPHMI, the printed circuit board in 3D

    ESPHMI

    maglash64/ESP32-S2-DEV

    ESP32-S2 Dev Board (Designed for Manufacturing) JLCPCB 2313 4-Layer Controlled Impedence Stackup All Components Available on LCSC. Features: 128Mb FLASH. USB-C Connector for Programming All Usable GPIOs exposed.

    39 parts9

Questions

How big is the Esp32s2-nixiehost PCB?

It measures 139 × 59 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32s2-nixiehost use?

60 parts, built around the ESP32-S2, ME6206A36M3G and TS-1187A-B-A-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32s2-nixiehost KiCad files?

From the cnlohr/cnixxi repository on GitHub, at the commit this page was made from: the board is esp32s2-nixiehost/esp32s2-nixiehost.kicad_pcb and its schematic attic/esp32s2-nixietube/esp32s2-nixietube.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32s2-nixiehost design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).