4 layers67 × 54 mm
ATSAMD 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
66 parts15
4 layers67 × 54 mm
ESP32 SIFIVE 00
probe-rs/hive15A Raspberry PI shield for testing probe-rs against many chips & probes.
- Size
- 67 × 54 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 81
- Nets
- 139
- Pads
- 373
- Tracks, vias
- 1,182, 135
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Apr 2020
- Updated
- 21 Jan 2022
Overview
ESP32 SIFIVE 00 is an open-source printed circuit board by probe-rs, from the probe-rs/hive repository on GitHub. It is a 4-layer board of 67 × 54 mm with 81 parts on 139 nets, routed with 1,182 tracks and 135 vias.
It is built around the ESP32-S2, ESP32-S3-WROOM-1-N8R8 and W25X40CLSNIG. Its parts include 25 capacitors, 19 resistors, 6 ICs and 1 connector. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-S2
QFN-56-EP(7x7)-40℃~+125℃ -97dBm 135mA 150Mbps 2.4GHz 2.4GHz~2.4835GHz 2.8V~3.6V 63mA DMA function SPI、UART、I2C、I2S WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
ESP32-S3-WROOM-1-N8R8
SMD,25.5x18mm-104.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
W25X40CLSNIG
SOIC-8-150mil-40℃~+85℃ 100,000 cycles 104MHz 10uA 150ms@(64KB) 2.3V~3.6V 20 Years 4Mbit 800us SPI SOIC-8-150mil NOR FLASH ROHSWinbondNOR FLASH
README
daughterboard/ESP32_SIFIVE_00/README.mdDaughterboard ESP32_SIFIVE_00
This board features RISC-V and Xtensa cores.
Targets
The following targets are implemented on this Daughterboard:
| Designation | MCU |
|---|---|
| target0 | ESP32-S3-WROOM-1-N8R8 |
| target1 | ESP32-S2 |
| target2 | LOFIVE-R1 (FE310-G002) |
| target3 | ESP32-C3 |
Partlist
The partlist for this Daughterboard is available here.
Other
The target3 and target1 devices have separate flash memory, as the currently available cores do not have any embedded flash.
Parts
81| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3, C6, C7, C8, C10, C11, C12, C13, C16, C18, C21, C22, C23, C24, C25 +1 |
| 10 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R9, R10, R11, R12, R14, R15, R16 |
| 9 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5, R6, R7, R8, R13, R17, R18, R19 |
| 4 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C14, C15, C19 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C5, C17, C20 |
| 4 | TCK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2, TP13, TP24, TP35 |
| 4 | TDI | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4, TP15, TP26, TP37 |
| 4 | TDO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3, TP14, TP25, TP36 |
| 4 | TMS | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP12, TP23, TP34 |
| 4 | UART_RX | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7, TP18, TP29, TP40 |
| 4 | UART_TX | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6, TP17, TP28, TP39 |
| 3 | NRST | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP3, JP4 |
| 2 | BOOT | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP5 |
| 2 | W25X40CLSNIG | hive_daughterboard:W25X40CLSNIG | IC1, IC2 |
| 1 | ESP32-S2 | hive_daughterboard:ESP32-S2 | U1 |
| 1 | ESP32-S3-WROOM-1-N8R8 | hive_daughterboard:XCVR_ESP32-S3-WROOM-1-N8R8 | U0 |
| 1 | LoFive-R1 | hive_daughterboard:LoFive-R1 | U2 |
| 1 | MountingHoleDaughterboard | MountingHole:MountingHole_2.7mm_M2.5 | H1 |
| 1 | QFN50P500X500X90-33N | hive_daughterboard:ESP32-C3 | U3 |
| 1 | m2_keyA_67pin_daughterboard | hive:m2_keyB | J1 |
More from probe-rs/hive
8- 4 layers67 × 54 mm
LPC 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
63 parts15 - 4 layers67 × 54 mm
STM32 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
61 parts15 - 4 layers67 × 54 mm
NRF 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
56 parts15 - 4 layers85 × 66 mm
Target stack shield
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
44 parts15 - 2 layers85 × 60 mm
Testboard
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
31 parts15 - 4 layers85 × 56 mm
Probe shield
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
18 parts15 - 4 layers67 × 54 mm
Daughterboard template
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
2 parts15
Similar boards
- 4 layers175.6 × 122.1 mm
- 6 layers100 × 62 mm
Vanilla ice40-8k
pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.
134 parts6MIT - 4 layers40 × 40 mm
- 2 layers56 × 43 mm
Payload datalogger
CU-Rocketry/payload-datalogger
Wirelessly configurable thermocouple data logging PCB implementing four MCP96RL00T on-board thermocouple to I2C converter ICs, an ESP32-C3 MCU, and flash storage.
55 parts - 4 layers159 × 132.3 mm
- 4 layers181.5 × 182.3 mm
Stencil
jerry-kerenzikov/ytterbium
Project files for Ytterbium modular CPU platform and Yprog programming tool
421 partsCERN-OHL-S-2.0 - 4 layers20 × 26 mm
Esp32 dev
ParagChoukekar/PCB_DESIGNS
This is an experimental PCB design focused on power regulation, converting a 24V DC input to regulated 5V and 3.3V outputs while keeping the bill of materials (BOM) minimal.
44 partsMIT - 2 layers54.3 × 111.4 mm
Questions
How big is the ESP32 SIFIVE 00 PCB?
It measures 67 × 54 mm and has 4 copper layers, 0.8 mm thick.
What parts does the ESP32 SIFIVE 00 use?
81 parts, built around the ESP32-S2, ESP32-S3-WROOM-1-N8R8 and W25X40CLSNIG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 SIFIVE 00 KiCad files?
From the probe-rs/hive repository on GitHub, at the commit this page was made from: the board is daughterboard/ESP32_SIFIVE_00/ESP32_SIFIVE_00.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 SIFIVE 00 design in my own project?
Its repository states no licence, so its author keeps all rights: ask probe-rs before reusing the design.