
Breakout adc
pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.

Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.
Vanilla ice40-8k is an open-source printed circuit board by pbozeman, from the pbozeman/vanilla-ice40 repository on GitHub, published under the MIT licence. It is a 6-layer board of 100 × 62 mm with 134 parts on 285 nets, routed with 2,541 tracks and 876 vias.
It is built around the ICE40HX8K-CT256, W25X40CLSNIG and FT2232HL, with the FX18-120S-0.8SV20, 1N5819HW-7-F-01 and DMG2305UX-13 among its other parts. Its parts include 57 capacitors, 40 resistors, 8 connectors, 6 ICs and 2 diodes. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.

There are 2 core boards, one based on an ICE40 HX4K with 96 available IO pins, and another based on an ICE40 HX8K with 192 available IO pins.
The core boards are "vanilla" with minimal on board peripherals. Almost all IO pins are routed to mezzanine connectors. Expansion boards can be mixed and matched for different projects, while reusing the core board. The expansion boards can be daisy chained.
This is a work in progress for use in a personal project, but so far the following boards are in the repo:
vanilla-ice40: core board based on the HX4K TQ144 package. There is an onboard USBC connector for power, programming, and uart/com port communication. It is directly programmable with Lattice Diamond Programmer and icestorm. The onboard FTDI chip can be disabled. The SPI pins to the flash and ice40 are exposed if one wishes to use an external programmer. There are 2 onboard user LEDs, 1 I2C connector, and 96 IOs routed to a mezzanine connector on the right side of the board.
vanilla-ice40-hx8k: core board based on the HX8K CT256 BGA package. It is similar to the board above, but ads a user button on board. It has 192 available IO pins, with 96 IO pins routed to the left and 96 pins routed to the right of the board. (A PCF file is provided for both boards, sharing the same signal names for the right side of the board.)
breakout-sram: 16Mbit sram chip with with mezzanine connectors on both side of the board for pass through of unused pins.
breakout-pmod: 12 port pmod connector, spaced such that they can be used in single, dual or quad pmod configurations.
breakout-passthrough: direct passthrough of all signals. (This is basically a template and for testing.) NOTE: the net names and labels on this board are stale.
Parts numbers are populated for Digikey and JLCPCB, and JLCPCB rotations are provided. The bom and positions file, along with gerbers, can be exported with the JLCPCB Fabrication Toolkit plugin.
All boards other than the HX8K are single sided and optimized for cost and hand assembly. My soldering skills are below average, and I manged to hand assemble versions of each of these these boards other than the HX8K. The HX8K uses BGA, via-in-pad, and 201 sized caps between the BGA pads, and likely requires higher soldering skills.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | 0.1uf | Capacitor_SMD:C_0201_0603Metric | C3, C11, C13, C14, C16, C17, C18, C19, C21, C22, C23, C24, C26, C27, C28, C29 +10 |
| 15 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R8, R18, R20, R21, R22, R26, R27, R28, R30, R33, R36, R37, R38, R39 |
| 15 | 22uf | Capacitor_SMD:C_0603_1608Metric | C2, C10, C12, C15, C20, C25, C30, C35, C37, C44, C47, C52, C54, C55, C57 |
| 14 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C1, C36, C38, C39, C40, C41, C42, C43, C45, C46, C48, C51, C53, C56 |
| 10 | 0 | Resistor_SMD:R_0603_1608Metric | R9, R12, R13, R14, R15, R16, R17, R24, R25, R301 |
| 7 | 2.2k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R6, R23, R29 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H101, H102, H103, H104 |
| 3 | 5.1k | Resistor_SMD:R_0603_1608Metric | R7, R31, R32 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J8, J9 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 2.2uH | Inductor_SMD:L_1008_2520Metric | L1, L2 |
| 2 | 27pf | Capacitor_SMD:C_0402_1005Metric | C49, C50 |
| 2 | 600ohm/500ma | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | Blue | Diode_SMD:D_0603_1608Metric | USR1, USR2 |
| 2 | FX18-120S-0.8SV20 | custom:CUSTOM_FX_120S-0.8SH20 | J2, J3 |
| 2 | SPDT | Button_Switch_SMD:SW_SPST_PTS810 | BUT1, RESET1 |
| 2 | TPS563252DRLR | TPS563252DRLR:SOT6_DRL_TEX | U5, U6 |
| 1 | 10M | Resistor_SMD:R_0603_1608Metric | R34 |
| 1 | 12Mhz/18pf | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 12k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 1N4148WSF-7 | Diode_SMD:D_SOD-323F | D1 |
| 1 | 1N5819HW | Diode_SMD:D_SOD-123 | D2 |
| 1 | 45.3k | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 600ohm/1.5A | Inductor_SMD:L_0603_1608Metric | FB3 |
| 1 | 93LCxxBxxOT | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | DMG2305UX-13 | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | FT2232HL | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | Green | Diode_SMD:D_0603_1608Metric | CDONE1 |
| 1 | ICE40HX8K-CT256 | ICE40HX8K-CT256:BGA256C80P16X16_1400X1400X170 | U1 |
| 1 | LOGO | logo:logo | G*** |
| 1 | Red | Diode_SMD:D_0603_1608Metric | 5V_1 |
| 1 | SG-8101CE 100Mhz | Oscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm | X1 |
| 1 | SM04B-SRSS-TBLFSN | SM04B-SRSS-TB-LF-SN:CONN_SM04B_JST | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB1 |
| 1 | W25X40CLSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
The 133 most common of 134 parts.

pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.

pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.

pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.

pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.

pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.

pbozeman/vanilla-ice40
Hardware design and verilog sample files for Lattice ICE40 development boards and expansion boards.



eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.



CU-Rocketry/payload-datalogger
Wirelessly configurable thermocouple data logging PCB implementing four MCP96RL00T on-board thermocouple to I2C converter ICs, an ESP32-C3 MCU, and flash storage.

It measures 100 × 62 mm and has 6 copper layers, 1.6 mm thick.
134 parts, built around the ICE40HX8K-CT256, W25X40CLSNIG, FT2232HL and FX18-120S-0.8SV20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pbozeman/vanilla-ice40 repository on GitHub, at the commit this page was made from: the board is pcb/vanilla-ice40-8k/vanilla-ice40-8k.kicad_pcb and its schematic pcb/breakout-adc/adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).