2 layers80 × 100 mm
2 layers60 × 50 mm
WactrollerLogic
hykilpikonna/OpenHardware10Open-sourced Hardware Experimentation <3
- Size
- 60 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 75
- Pads
- 230
- Tracks, vias
- 658, 70
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Mar 2023
- Updated
- 25 Apr 2026
Overview
WactrollerLogic is an open-source printed circuit board by hykilpikonna, from the hykilpikonna/OpenHardware repository on GitHub. It is a 2-layer board of 60 × 50 mm with 36 parts on 75 nets, routed with 658 tracks and 70 vias.
It is built around the ESP32-S2, SN65HVD230DR and AMS1117-3.3, with the MC-126D-DG10 and XL-1010RGBC-WS2812B-DZ among its other parts. Its parts include 11 capacitors, 3 diodes, 1 resistor, 1 connector and 1 crystal. It belongs with the ESP32 boards of this library.
Main components
5
ESP32-S2
QFN-56-EP(7x7)-40℃~+125℃ -97dBm 135mA 150Mbps 2.4GHz 2.4GHz~2.4835GHz 2.8V~3.6V 63mA DMA function SPI、UART、I2C、I2S WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
SN65HVD230DR
SOP-8CAN TransceiversTokmas
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MC-126D-DG10
SMD-40℃~+85℃ 1 10,000 cycles 16P 20V 5A Female Surface Mount, Right Angle Type-C USB 3.1 SMD USB Connectors ROHSHanbo ElectronicUSB ConnectorsXL-1010RGBC-WS2812B-DZ
SMD1010SMD1010 SMT ROHSXINGLIGHTUncategorised
README
README.mdOpenHardware
在这里会放一些开源硬件的实验作品（还在学习中... qwq
每个作品都有自己的文件夹和说明文档和 license，请看下面的索引：
Index / 索引
- Coyote-Pikachu 让某电击小盒子变成一只皮卡丘的外壳 ⚡️
- TaikoStick 一对可以在任何表面上打太鼓达人的鼓槌 🥁
- CardReader 一个为 SEGA/Bemani 街机音游设计的读卡器固件 💳
- Sxm2Fan 3D 打印的 V100 SXM2 散热风扇固定器 ❄️
- YurucampLicensePlate 摇曳露营主题车牌框 🏕️
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF C1525 | easyeda:C0402 | C3, C4, C5, C6, C9, C10 |
| 3 | 10k C25744 | easyeda:R0402 | LR3, R1, R3 |
| 2 | 10uF C15525 | easyeda:C0402 | C7, LCin1 |
| 2 | 1uF C52923 | easyeda:C0402 | C2, C8 |
| 2 | 20pF C1554 | easyeda:C0402 | XC1, XC2 |
| 2 | 2k C4109 | easyeda:R0402 | LR1, LR2 |
| 2 | 5.1k C25905 | easyeda:R0402 | BR1, BR2 |
| 2 | TYPE-C 24P QCHT 143 | easyeda:TYPE-C-USB-SMD_QCHT-143 | NotUSB-Last1, NotUSB-Next1 |
| 1 | 0603 Blue | easyeda:LED0603-RD | Led3 |
| 1 | 0603 Red | easyeda:LED0603-RD | Led1 |
| 1 | 0603 Yellow | easyeda:LED0603-RD-YELLOW | Led2 |
| 1 | 100pF C1546 | easyeda:C0402 | C1 |
| 1 | 100uF C16133 | easyeda:CASE-B_3528 | LCout1 |
| 1 | 120Ω C25079 | easyeda:R0402 | R2 |
| 1 | 2.54-1*6 | easyeda:HDR-TH_6P-P2.54-V-M | JTAG1 |
| 1 | 2.54FH-1x15P-H8.5 | easyeda:HDR-TH_15P-P2.54-V-F | J1 |
| 1 | 40MHz (15pF) C9010 | easyeda:OSC-SMD_4P-L3.2-W2.5-BL_SIT8008BI | X1 |
| 1 | AMS1117-3.3 | easyeda:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | LDO1 |
| 1 | ESP32-S2 | easyeda:QFN-56_L7.0-W7.0-P0.40-TL-EP4.0 | MCU1 |
| 1 | MC-126D-DG10 | easyeda:USB-C-SMD_HANBO_MC-126D-DG10 | USB_C_Board1 |
| 1 | SN65HVD230DR | easyeda:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | CAN1 |
| 1 | XL-1010RGBC-WS2812B | easyeda:LED-SMD_4P-L1.0-W1.0-TL_XL-1010RGBC-WS2812B | RGB1 |
| 1 | ~ | easyeda:DCDC | DCDC1 |
Similar boards
- 2 layers22 × 56 mm
Esp32s2-funprog
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
49 parts114 - 4 layers60 × 85 mm
VehicleVCU PCB
nsm81/VehicleVCU_PCB
A Vehicle Control Unit provides multiple CANBUS transceivers for communication within a vehicle.
86 parts1 - 2 layers76.9 × 55 mm
AurisenseV2
catrahedron/AurisenseV2
A simple shift register based headpat haptics driver board for VRChat with 40 motor driver outputs and two SPI/UART extension ports
211 parts1CERN-OHL-W-2.0 - 4 layers45.8 × 25 mm
- 4 layers104.2 × 59.7 mm
- 2 layers100 × 75 mm
Chassis controller
KPI-Rover/ecu_hw
Development of a printed circuit board (PCB) for the chassis controller.
151 parts2 - 4 layers120 × 80 mm
Questions
How big is the WactrollerLogic PCB?
It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WactrollerLogic use?
36 parts, built around the ESP32-S2, SN65HVD230DR, AMS1117-3.3 and MC-126D-DG10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WactrollerLogic KiCad files?
From the hykilpikonna/OpenHardware repository on GitHub, at the commit this page was made from: the board is Wactroller/Logic/WactrollerLogic.kicad_pcb and its schematic Wactroller/Logic/WactrollerLogic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the WactrollerLogic design in my own project?
Its repository states no licence, so its author keeps all rights: ask hykilpikonna before reusing the design.