

Esp32 iot switch
these all are my pcb design projects
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 76
- Pads
- 122
- Tracks, vias
- 57, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Jul 2026
- Updated
- 12 Jul 2026
Overview
Esp32 iot switch is an open-source printed circuit board by Bhupeshpanwar, from the Bhupeshpanwar/all-pcb-design repository on GitHub. It is a 2-layer board with 23 parts on 76 nets, routed with 57 tracks and 0 vias.
It is built around the ESP32-S2. Its parts include 6 connectors, 4 resistors, 4 diodes, 4 transistors and 4 switches. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
1Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2, J3, J4, J5, J6 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | BC107 | Package_TO_SOT_THT:TO-18-3 | Q1, Q2, Q3, Q4 |
| 4 | Fujitsu_FTR-LYAA005x | Relay_THT:Relay_SPST-NO_Fujitsu_FTR-LYAA005x_FormA_Vertical | K1, K2, K3, K4 |
| 4 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_1.00mm:PinSocket_1x02_P1.00mm_Vertical | J1 |
| 1 | ESP32-S2 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U1 |
More from Bhupeshpanwar/all-pcb-design
6- 2 layers17.1 × 30.2 mm

- 2 layers49 × 64 mm

- 2 layers54 × 19.4 mm

- 2 layers35.4 × 23.2 mm

Voltage regulator for breadboard
Bhupeshpanwar/all-pcb-design
these all are my pcb design projects
7 parts - 2 layers

- 2 layers17.4 × 11.4 mm

Similar boards
- 2 layers139 × 59 mm

- 2 layers35 × 35 mm

- 4 layers60 × 33 mm

- 4 layers30 × 30 mm

- 4 layers26 × 29 mm

- 4 layers67 × 54 mm

ESP32 SIFIVE 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
81 parts15 - 2 layers60 × 50 mm

- 4 layers17.8 × 53.4 mm

ESPHMI
maglash64/ESP32-S2-DEV
ESP32-S2 Dev Board (Designed for Manufacturing) JLCPCB 2313 4-Layer Controlled Impedence Stackup All Components Available on LCSC. Features: 128Mb FLASH. USB-C Connector for Programming All Usable GPIOs exposed.
39 parts9
Questions
What parts does the Esp32 iot switch use?
23 parts, built around the ESP32-S2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 iot switch KiCad files?
From the Bhupeshpanwar/all-pcb-design repository on GitHub, at the commit this page was made from: the board is esp32 iot switch/esp32 iot switch.kicad_pcb and its schematic Hight power temperature sensor/Hight power temperature sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 iot switch design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bhupeshpanwar before reusing the design.