Skip to the content

Boards using the SG-210STF

27 boards

Boards in 24 GitHub repositories, designed in KiCad, that use the SG-210STF by Seiko Epson (-40℃~+85℃ 1.6V~3.6V 1.8mA 13MHz ±50ppm SMD2520-4P Crystal Oscillators ROHS). See how each wires it, with its parts, size, README and files; the SG-210STF’s symbol, footprint and pinout are on its own page.

  • 4 layers90.2 × 40 mmRadar v2, the printed circuit board in 3D

    Radar v2

    ckflight/FMCW-RADAR

    Frequency Modulated Continuous Wave Radar hardware and software design files with 26 dBm output power covering around 250 m.

    270 parts59GPL-3.0
  • 4 layers158 × 95 mmFHNW Pro4E FS19T8-3DPrinterBoard STM32, the printed circuit board in 3D

    FHNW Pro4E FS19T8-3DPrinterBoard STM32

    mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32

    Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

    264 parts17GPL-3.0
  • 4 layers71.1 × 94 mmIpotcas, the printed circuit board in 3D

    Ipotcas

    SuperTails/ipotcas

    IP over Tin Can and String - Connecting to the internet over two tin cans and a piece of string

    75 parts12
  • 6 layers90.2 × 95.9 mmLora payload, the printed circuit board in 3D

    Lora payload

    dpmj/masters-thesis-lora-gateway-compute-module-cubesat-payload-pcb

    Hardware source (KiCad) from my master's thesis in telecommunications engineering at the Polytechnic University of Valencia, 2025.

    403 parts2CERN-OHL-S-2.0
  • 2 layers46.9 × 46.6 mmFourth, the printed circuit board in 3D

    Fourth

    Bhakti-A/Maya_V_FlightController

    This is a custom flight controller PCB designed for drones.

    84 parts1
  • 2 layers92.9 × 54.5 mmSaponseEx, the printed circuit board in 3D

    SaponseEx

    hide4096/SaponseEx

    91 parts1
  • 4 layers27 × 55.5 mmNS FPGA V2 iCE, the printed circuit board in 3D

    NS FPGA V2 iCE

    uzzambutt/NorthernStudios-iCE40-UltraPlus-FPGA-Dev-Board

    NorthernStudios iCE40 UltraPlus FPGA Dev Board

    70 parts1MIT
  • 4 layers100 × 75 mmProgrammaGull Sandpiper, the printed circuit board in 3D

    ProgrammaGull Sandpiper

    4n3m4i1/PG_Logic

    Open Source FPGA Development Boards for Education and Deeply Embedded Applications

    214 partsMIT
  • 4 layers65.5 × 42.2 mmUSB thumb drive, the printed circuit board in 3D

    USB thumb drive

    Arhamee/hardware-portfolio

    Multi-layer PCB designs in KiCad 10 schematic capture to fabrication-ready Gerbers. High-speed routing, BGA escape, power electronics.

    126 partsMIT
  • 4 layers45.2 × 47.2 mmHdmi2mipi, the printed circuit board in 3D

    Hdmi2mipi

    badgeteam/hdmi2mipi

    This board design is a work in progress, use at your own risk.

    99 parts
  • 4 layers38.1 × 19 mmMAX32660 BRKOUT, the printed circuit board in 3D

    MAX32660 BRKOUT

    bkfast/MAX32660_BRKOUT

    Maxim MAX32660 Breakout PCB

    29 parts
  • 4 layers22 × 27.6 mmSTM32F031, the printed circuit board in 3D

    STM32F031

    Caljay/STM32DevBoard

    STM32 Devboard using the STM32F031 MCU

    25 parts
  • 2 layers132 × 59 mmWLC TX15W C1 V1.1, the printed circuit board in 3D

    WLC TX15W C1 V1.1

    dvhai08/WLC_TX15W_C1

    Wireless Charging (WLC) MP A11 Power Transmitter

    127 parts
  • 4 layers66 × 53.3 mmShield, the printed circuit board in 3D

    Shield

    harrydshill/Base-Station

    106 parts
  • 4 layers15 × 33 mmThermalCamera, the printed circuit board in 3D

    ThermalCamera

    keionbis/ThermalCamera

    24 parts
  • 4 layers99.1 × 53.3 mmStm32h743 can hs, the printed circuit board in 3D

    Stm32h743 can hs

    Kevinbot-Robotics/stm32h743_can_hs_dev

    An STM32H743 development board with on-board USB-HS and CAN-FD (up to 8Mbit/s)

    102 partsGPL-3.0
  • 2 layers61 × 77.8 mmReforge 1, the printed circuit board in 3D

    Reforge 1

    kishoriju-vrind/Reforge

    96 parts
  • 4 layers82 × 94 mmESP32 ETH Panel, the printed circuit board in 3D

    ESP32 ETH Panel

    mede-erik/ESP32_ETH_BORD

    A development board based on ESP32-WROOM-32E and LAN8720A controller, designed to ensure stable and high-performance Ethernet connectivity in IoT applications and integrations with Home Assistant. (WIP)

    120 partsMIT
  • 4 layers50 × 70 mmFPGA Board, the printed circuit board in 3D

    FPGA Board

    sneakylizard123-4/FPGA_Board

    It is built around the Lattice iCE40 FPGA, designed to be programmed over USB through the on-board FT232H. The SPI flash boots the bitstream on power-up.

    106 parts
  • 4 layers94.9 × 142 mmMikrofonarray Board Final, the printed circuit board in 3D

    Mikrofonarray Board Final

    thivananhdao/PCB-Mikrofonarray

    PCB Design for a university group project using KiCad

    193 parts
  • 2 layers100 × 100 mmTCB, the printed circuit board in 3D

    TCB

    TKG-Tou-Kai-Group/TKG_Wiki

    TKG Wiki

    124 parts
  • 2 layers46.5 × 34 mmHub, the printed circuit board in 3D

    Hub

    komori-t/Tupac2018

    38 parts8
  • 4 layers100 × 75 mmProgrammaGull Sandpiper, the printed circuit board in 3D

    ProgrammaGull Sandpiper

    4n3m4i1/PG_Logic

    Open Source FPGA Development Boards for Education and Deeply Embedded Applications

    191 partsMIT