
Radar v2
ckflight/FMCW-RADAR
Frequency Modulated Continuous Wave Radar hardware and software design files with 26 dBm output power covering around 250 m.

Maxim MAX32660 Breakout PCB
MAX32660 BRKOUT is an open-source printed circuit board by bkfast, from the bkfast/MAX32660_BRKOUT repository on GitHub. It is a 4-layer board of 38.1 × 19 mm with 29 parts on 31 nets, routed with 182 tracks and 37 vias.
It is built around the MAX32660GTG+, STTS751-1DP3F and SG-210STF. Its parts include 12 resistors, 6 capacitors, 3 diodes, 3 connectors and 2 ICs.
Simple Maxim MAX32660 Breakout PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R9, R10, R11, R12 |
| 3 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4 |
| 2 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J3 |
| 2 | RED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 2 | TestPoint | TestPoint:TestPoint_Keystone_5015_Micro-Minature | TP1, TP2 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | GRN | LED_SMD:LED_0402_1005Metric | D3 |
| 1 | MAX32660GTG+ | footprints:MAX32660GTG&plus_ | U1 |
| 1 | SG-210STF | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | X1 |
| 1 | STTS751-1DP3F | footprints:UDFN-6L | U2 |

ckflight/FMCW-RADAR
Frequency Modulated Continuous Wave Radar hardware and software design files with 26 dBm output power covering around 250 m.

mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32
Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

SuperTails/ipotcas
IP over Tin Can and String - Connecting to the internet over two tin cans and a piece of string

dpmj/masters-thesis-lora-gateway-compute-module-cubesat-payload-pcb
Hardware source (KiCad) from my master's thesis in telecommunications engineering at the Polytechnic University of Valencia, 2025.

Bhakti-A/Maya_V_FlightController
This is a custom flight controller PCB designed for drones.


uzzambutt/NorthernStudios-iCE40-UltraPlus-FPGA-Dev-Board
NorthernStudios iCE40 UltraPlus FPGA Dev Board

4n3m4i1/PG_Logic
Open Source FPGA Development Boards for Education and Deeply Embedded Applications
It measures 38.1 × 19 mm and has 4 copper layers, 1.57 mm thick.
29 parts, built around the MAX32660GTG+, STTS751-1DP3F and SG-210STF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bkfast/MAX32660_BRKOUT repository on GitHub, at the commit this page was made from: the board is MAX32660_BRKOUT/MAX32660_BRKOUT.kicad_pcb and its schematic MAX32660_BRKOUT/MAX32660_BRKOUT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bkfast before reusing the design.