Skip to the content
1234

SG-210STF

Seiko EpsonExtended

-40℃~+85℃ 1.6V~3.6V 1.8mA 13MHz ±50ppm SMD2520-4P Crystal Oscillators ROHS

Part id
epson/SG-210STF
Category
Oscillators
Package
SMD2520-4P
Pins
4
In stock
0 at JLCPCB (C340934)
Used on
27 open-source boards

Overview

The SG-210STF is an oscillator made by Seiko Epson in a SMD2520-4P package with 4 pins. -40℃~+85℃ 1.6V~3.6V 1.8mA 13MHz ±50ppm SMD2520-4P Crystal Oscillators ROHS.

PCBKit's library has its KiCad symbol (Oscillator:SG-210STF, from KiCad's library) and its footprint (Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C340934). 27 open-source boards in 24 repositories on GitHub use it.

Symbol

1ST2GND3OUT4Vcc
Oscillator:SG-210STFFrom KiCad's library

Footprint

1234
Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mmFrom KiCad's library

Pinout

4
The pins of the SG-210STF
PinNameType
1STInput
2GNDPower in
3OUTOutput
4VccPower in

Open-source boards using it

27See all 27
  • 4 layers90.2 × 40 mmRadar v2, the printed circuit board in 3D

    Radar v2

    ckflight/FMCW-RADAR

    Frequency Modulated Continuous Wave Radar hardware and software design files with 26 dBm output power covering around 250 m.

    270 parts59GPL-3.0
  • 4 layers158 × 95 mmFHNW Pro4E FS19T8-3DPrinterBoard STM32, the printed circuit board in 3D

    FHNW Pro4E FS19T8-3DPrinterBoard STM32

    mnemocron/FHNW-Pro4E-FS19T8-3DPrinterBoard-STM32

    Marlin 2.0 compatible 3D printer board based on STM32F103 (KiCad)

    264 parts17GPL-3.0
  • 4 layers71.1 × 94 mmIpotcas, the printed circuit board in 3D

    Ipotcas

    SuperTails/ipotcas

    IP over Tin Can and String - Connecting to the internet over two tin cans and a piece of string

    75 parts12
  • 6 layers90.2 × 95.9 mmLora payload, the printed circuit board in 3D

    Lora payload

    dpmj/masters-thesis-lora-gateway-compute-module-cubesat-payload-pcb

    Hardware source (KiCad) from my master's thesis in telecommunications engineering at the Polytechnic University of Valencia, 2025.

    403 parts2CERN-OHL-S-2.0
  • 2 layers46.9 × 46.6 mmFourth, the printed circuit board in 3D

    Fourth

    Bhakti-A/Maya_V_FlightController

    This is a custom flight controller PCB designed for drones.

    84 parts1
  • 2 layers92.9 × 54.5 mmSaponseEx, the printed circuit board in 3D

    SaponseEx

    hide4096/SaponseEx

    91 parts1
  • 4 layers27 × 55.5 mmNS FPGA V2 iCE, the printed circuit board in 3D

    NS FPGA V2 iCE

    uzzambutt/NorthernStudios-iCE40-UltraPlus-FPGA-Dev-Board

    NorthernStudios iCE40 UltraPlus FPGA Dev Board

    70 parts1MIT
  • 4 layers100 × 75 mmProgrammaGull Sandpiper, the printed circuit board in 3D

    ProgrammaGull Sandpiper

    4n3m4i1/PG_Logic

    Open Source FPGA Development Boards for Education and Deeply Embedded Applications

    214 partsMIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SG-210STF?

Yes. The symbol is Oscillator:SG-210STF and the footprint Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SG-210STF?

SMD2520-4P, with 4 pins. Its footprint is drawn on this page.

Where is the SG-210STF datasheet?

Seiko Epson publishes it: the Datasheet link on this page opens it.

Where can I order the SG-210STF?

JLCPCB lists it as part C340934, with 0 in stock; the sellers' links on this page open their listings.

What can replace the SG-210STF?

Parts like it in the library: the MXO45-3C-13M000000 by CTS Electronic Components, the MXO45HSLV-3C-13M000000 by CTS Electronic Components, the 500SAAA13M0000ACF by Silicon Labs and the 500SABB13M0000ACH by Silicon Labs. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SG-210STF?

27 boards in 24 repositories on GitHub; the most starred are listed on this page, with their KiCad files.