Skip to the content
4 layers50 × 70 mmFPGA Board, the printed circuit board in 3D

It is built around the Lattice iCE40 FPGA, designed to be programmed over USB through the on-board FT232H. The SPI flash boots the bitstream on power-up.

Size
50 × 70 mm
Copper layers
4
Thickness
1.6 mm
Parts
106
Nets
90
Pads
407
Tracks, vias
812, 106
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
7 Aug 2026
Updated
24 Sep 2026

Overview

FPGA Board is an open-source printed circuit board by sneakylizard123-4, from the sneakylizard123-4/FPGA_Board repository on GitHub. It is a 4-layer board of 50 × 70 mm with 106 parts on 90 nets, routed with 812 tracks and 106 vias.

It is built around the ICE40UP5K-SG48ITR50, W25Q128JVSIQ and 93LC56BT-I/OT, with the FT232H, TLV75712PDBV and TLV75725PDBV among its other parts. Its parts include 38 capacitors, 24 resistors, 9 ICs, 3 connectors and 2 diodes. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.

Main components

9

README

README.md

FPGA_Board

A iCE40 FPGA devboard

Custom Features

  • ICE40UP5K-SG48ITR FPGA (5280 LUTs, QFN-48)
  • On-board FT232H flasher with EEPROM
  • 16MB W25Q128JVS SPI flash
  • USB-C with ESD protection
  • RGB LED, green config-status LED, reset button
  • 12MHz oscillator, 4-layer PCB

PCB Design

The board is a 4-layer PCB.

PCB 3D / layout image

It is built around the Lattice iCE40 FPGA, designed to be programmed over USB through the on-board FT232H. The SPI flash boots the bitstream on power-up. It is fully supported by the open-source yosys/nextpnr/icestorm flow.

Firmware

As the board uses an iCE40 UltraPlus, it is programmed with yosys + nextpnr-ice40 + icepack + iceprog/icestorm.

BOM

RefValueLCSC #MPNManufacturerFootprintQtyUnit $Ext $Link
C1,C2,C3,C4,C5,C12,C13,C14,C17,C24,C34,C3510uF 0402C307415--0402120.19002.28LCSC
C6,C7,C8,C9,C10,C11,C15,C16,C18,C19,C20,C21,C22,C23,C25,C26,C27,C28,C29,C30,C31,C32,C33,C37,C38100nF 0402C131394--0402250.00960.24LCSC
C364.7uF 0402C21120--040210.02000.02LCSC
D1LED_ARGB PLCC4C2786--LED_Cree-PLCC4_2x2mm_CW10.13000.13LCSC
D2Green LED 0402C2286--040210.01000.01LCSC
FB1,FB2,FB3Ferrite Bead 1.5kC82155BLM18HE152SN1DmuRata060330.03000.09LCSC
J1USB-C Receptacle 14PC165948TYPE-C-31-M-12Korean Hroparts ElecUSB-C10.19000.19LCSC
J3,J4Pin Header 2x12 2.54mmC492423PZ254V-12-12PXFCNThrough Hole20.07000.14LCSC
R1,R25.1k 1% 0402C259050402WGF5101TCEUNI-ROYAL040220.00400.01LCSC
R3,R422R 1% 0402C23200--040220.00400.01LCSC
R5,R6,R10,R11,R19,R20,R21,R23,R2410k 1% 0402C25904--040290.00400.04LCSC
R71k 1% 0402C25898--040210.00400.00LCSC
R8,R9,R140R 0402C25887--040230.00300.01LCSC
R12100R 1% 0402C22861--040210.00400.00LCSC
R1812k 1% 0402C25913--040210.00400.00LCSC
R222.2k 1% 0402C25901--040210.00400.00LCSC
SW1Tactile Switch EVQPUDC158289EVQPUMPANASONICSMD10.20000.20LCSC
U1USBLC6-2SC6C7519USBLC6-2SC6STSOT-23-610.18000.18LCSC
U2TLV75712PDBVC485515TLV75712PDBVRTISOT-23-510.18000.18LCSC
U3TLV75725PDBVC485516TLV75725PDBVRTISOT-23-510.18000.18LCSC
U4TLV75733PDBVC485517TLV75733PDBVRTISOT-23-510.18000.18LCSC
U574AUC2G240C2652105--VSSOP-810.72000.72LCSC
U6ICE40UP5K-SG48ITRC2678152ICE40UP5K-SG48ITRLatticeQFN-4818.56008.56LCSC
U7W25Q128JVSC113767W25Q128JVSWinbondSOIC-812.52002.52LCSC
U8FT232HC51997FT232HLFTDILQFP-48110.620010.62LCSC
U993LC56BT-I/OTC19027193LC56BT-I/OTMicrochipSOIC-810.45000.45LCSC
Y1SG-210STF 12MHzC17426037SG-210STFSeiko Epson2.5x2.0mm10.37000.37LCSC
PCBBare PCB———50x70mm120.000020.00—
STENCILTop stencil———100x150mm118.000018.00—
Total—————79—65.33—

Full CSVs: LCSC BOM KiCad generated BOM Pick and place

Production

Production files in Prod Files This board assumes JLCPCB's standard 4 layer

  • HASL Lead Free
  • 1.6mm thick board

Parts

106
QtyValueFootprintReferences
250.1uFCapacitor_SMD:C_0402_1005MetricC10, C11, C15, C16, C18, C19, C20, C21, C22, C23, C25, C26, C27, C28, C29, C30 +9
1210uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C12, C13, C14, C17, C24, C34, C35
12TestPointTestPoint:TestPoint_Pad_1.0x1.0mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12
910kResistor_SMD:R_0402_1005MetricR5, R6, R10, R11, R19, R20, R21, R23, R24
60RResistor_SMD:R_0402_1005MetricR8, R9, R14, R15, R16, R17
4FiducialFiducial:Fiducial_0.5mm_Mask1mmFID1, FID2, FID3, FID4
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3BLM18HE152SN1DInductor_SMD:L_0603_1608MetricFB1, FB2, FB3
3TestPointTestPoint:TestPoint_Pad_2.0x2.0mmTP13, TP14, TP15
222Resistor_SMD:R_0402_1005MetricR3, R4
25.1kResistor_SMD:R_0402_1005MetricR1, R2
2Conn_02x12_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_VerticalJ3, J4
10Resistor_SMD:R_0402_1005MetricR13
1100Resistor_SMD:R_0402_1005MetricR12
112kResistor_SMD:R_0402_1005MetricR18
11kResistor_SMD:R_0402_1005MetricR7
12.2kResistor_SMD:R_0402_1005MetricR22
14.7uFCapacitor_SMD:C_0402_1005MetricC36
174AUC2G240Package_SO:VSSOP-8_3x3mm_P0.65mmU5
193LC56BT-I/OTPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU9
1FT232HPackage_QFP:LQFP-48_7x7mm_P0.5mmU8
1GREENLED_SMD:LED_0402_1005MetricD2
1ICE40UP5K-SG48ITRPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm_ThermalViasU6
1LED_ARGBLED_SMD:LED_Cree-PLCC4_2x2mm_CWD1
1LOGOlogo:linuxpenguin-maskG***
1LOGOlogo:linuxpenguin_cuG***
1SG-210STFOscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mmY1
1SW_PushButton_Switch_SMD:Panasonic_EVQPUM_EVQPUDSW1
1TLV75712PDBVPackage_TO_SOT_SMD:SOT-23-5U2
1TLV75725PDBVPackage_TO_SOT_SMD:SOT-23-5U3
1TLV75733PDBVPackage_TO_SOT_SMD:SOT-23-5U4
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U1
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1
1W25Q128JVSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU7

Similar boards

  • 6 layers100 × 75 mmSTM32H743, the printed circuit board in 3D

    STM32H743

    sneakylizard123-4/STM32H743

    This board puts an STM32H743XIH6 and an iCE40 UP5K on the same PCB. The H743 handles control, USB, Ethernet, storage, and audio.

    171 partsCERN-OHL-P-2.0
  • 2 layersDancing dots pcb, the printed circuit board in 3D

    Dancing dots pcb

    softminus/dancing_dots

    The Fastest Flip Dot in the West

    1,349 parts
  • 4 layers115 × 85 mmDual adc usb, the printed circuit board in 3D

    Dual adc usb

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    175 parts10
  • 4 layers62 × 22.2 mmUPduino v3.0, the printed circuit board in 3D

    UPduino v3.0

    tinyvision-ai-inc/UPduino-v3.0

    UPduino 3.0: new 4 layer layout, various other improvements

    116 parts365MIT
  • 4 layers27 × 55.5 mmNS FPGA V2 iCE, the printed circuit board in 3D

    NS FPGA V2 iCE

    uzzambutt/NorthernStudios-iCE40-UltraPlus-FPGA-Dev-Board

    NorthernStudios iCE40 UltraPlus FPGA Dev Board

    70 parts1MIT
  • 4 layers95 × 67 mmLoRaDongle iCE40, the printed circuit board in 3D

    LoRaDongle iCE40

    marrrk/LoRaDongle

    A Risc-V Based LoRa custom PCB

    145 parts4
  • 4 layers100 × 100 mmFpga, the printed circuit board in 3D

    Fpga

    Atlantix-EDA/CopperForge

    Companion PCB Release & Manufacturing Tool for KiCad

    413 parts24MIT

Questions

How big is the FPGA Board PCB?

It measures 50 × 70 mm and has 4 copper layers, 1.6 mm thick.

What parts does the FPGA Board use?

106 parts, built around the ICE40UP5K-SG48ITR50, W25Q128JVSIQ, 93LC56BT-I/OT and FT232H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FPGA Board KiCad files?

From the sneakylizard123-4/FPGA_Board repository on GitHub, at the commit this page was made from: the board is kicad/FPGA_Board.kicad_pcb and its schematic kicad/FPGA_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FPGA Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask sneakylizard123-4 before reusing the design.