Skip to the content
12345

TLV75712PDBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1.2V 1A 25uA 425mV@(1A) 45dB@(100kHz) 5.5V 71.5uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Soft Start、Thermal Shutdown SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV75712PDBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
3,964 at JLCPCB (C1509296)
Used on
5 open-source boards

Overview

The TLV75712PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1.2V 1A 25uA 425mV@(1A) 45dB@(100kHz) 5.5V 71.5uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Soft Start、Thermal Shutdown SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TLV75712PDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 3,964 are in stock at JLCPCB (part C1509296). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:TLV75712PDBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

15
Supply, least
1.45 V · VIN, recommended operating min · p. 4
Supply, most
5.5 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
6 V · VIN, absolute max · p. 4
Junction, hottest
150 °C · Junction temperature, absolute max · p. 4
Takes working
25 µA · IGND, typical at TJ = 25°C, IOUT = 1 mA · p. 5
Takes asleep
100 nA · Shutdown current, typical, VEN ≤ 0.4V · p. 5
Gives
1 A · IOUT, continuous output max · p. 4
Current limit
1.55 A · Output current limit, typical · p. 5
Dropout
1 V · Typical at IOUT = 1A, 1.2V ≤ VOUT < 1.5V, TJ ≤ 85°C · p. 6
Dropout
1.1 V · Max at IOUT = 1A, 1.2V ≤ VOUT < 1.5V, −40°C ≤ TJ ≤ 125°C · p. 6
Junction to air (DBV (SOT-23))
100.8 K/W · EVM PCB, typical · p. 5
Junction to air (DBV (SOT-23))
231.1 K/W · JEDEC PCB, typical · p. 5
Junction to board (DBV (SOT-23))
67.8 K/W · EVM PCB, ψJB characterization parameter · p. 5
Junction to board (DBV (SOT-23))
64.4 K/W · JEDEC PCB, junction-to-board thermal resistance · p. 5
Junction to case (DBV (SOT-23))
118.4 K/W · JEDEC PCB, junction-to-case top thermal resistance · p. 5

What it is and has

5
Quiescent current
25μA typical · p. 1
Soft-start
Built-in, monotonic VOUT rise · p. 1
Protection
Foldback current limit · p. 1
Output discharge
Active · p. 1
Package
2.9mm × 2.8mm SOT-23-5 (DBV) · p. 1

Around it

2
cap 1µF or larger
between IN and GND; Required input capacitor; effective capacitance at the pin must exceed 0.47uF. · p. 3
cap 1µF or larger
between OUT and GND; Required output capacitor; effective capacitance at the pin must exceed 0.47uF. · p. 3

Specifications

48
ParameterConditionsAs printedPage
Supply voltage VINOver operating free-air temperature rangemin -0.3 · max 6 V4
Enable voltage VENOver operating free-air temperature rangemin -0.3 · max 6 V4
Output voltage VOUTMaximum is VIN + 0.3V or 6.0V, whichever is smallermin -0.3 V4
Operating junction temperature range TJmin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; rating ±1000 Vmax 1000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per JEDEC specification JESD22-C101; rating ±500 Vmax 500 V4
Input voltage VINmin 1.45 · max 5.5 V4
Output voltage VOUTFamily output-voltage rangemin 0.6 · max 5 V4
Enable voltage VENmin 0 · max 5.5 V4
Output current IOUTmin 0 · max 1 A4
Input capacitor CINmin 1 uF4
Output capacitor COUTmin 1 · max 200 uF4
Enable toggle frequency fENmax 10 kHz4
Junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJADBV (SOT-23), 5 PINS; EVM PCBtyp 100.8 °C/W5
Junction-to-top characterization parameter ψJTDBV (SOT-23), 5 PINS; EVM PCBtyp 23.3 °C/W5
Junction-to-board characterization parameter ψJBDBV (SOT-23), 5 PINS; EVM PCBtyp 67.8 °C/W5
Junction-to-ambient thermal resistance RθJADBV (SOT-23), 5 PINS; JEDEC PCBtyp 231.1 °C/W5
Junction-to-case (top) thermal resistance RθJC(top)DBV (SOT-23), 5 PINS; JEDEC PCBtyp 118.4 °C/W5
Junction-to-board thermal resistance RθJBDBV (SOT-23), 5 PINS; JEDEC PCBtyp 64.4 °C/W5
Junction-to-top characterization parameter ψJTDBV (SOT-23), 5 PINS; JEDEC PCBtyp 28.4 °C/W5
Junction-to-board characterization parameter ψJBDBV (SOT-23), 5 PINS; JEDEC PCBtyp 63.8 °C/W5
Output accuracy–40°C ≤ TJ ≤ 85°C, VOUT ≥ 1Vmin -1 · max 1 %5
Output accuracyVOUT ≥ 1V; –40°C ≤ TJ ≤ +125°Cmin -1.5 · max 1.5 %5
Line regulation (ΔVOUT)ΔVINVOUT + 0.5V ≤ VIN ≤ 5.5Vtyp 2 mV5
Load regulation ΔVOUT/ΔIOUTDBV package; 0.1mA ≤ IOUT ≤ 1A, VIN ≥ 2.4Vtyp 0.06 V/A5
Ground current IGNDTJ = 25°Ctyp 25 · max 31 uA5
Ground current IGND–40°C ≤ TJ ≤ +85°Cmax 33 uA5
Ground current IGND–40°C ≤ TJ ≤ +125°Cmax 40 uA5
Shutdown current ISHDNVEN ≤ 0.4V, 1.45V ≤ VIN ≤ 5.5Vtyp 0.1 · max 1 uA5
Output current limit ICLVIN = VOUT + VDO(MAX) + 0.25V; VOUT = VOUT - 0.2V, VOUT ≤ 1.5Vmin 1.2 · typ 1.55 · max 1.78 A5
Short circuit current limit ISCVOUT = 0V, VIN = VOUT + VDO(MAX) + 0.25Vtyp 755 mA5
Dropout voltage VDODBV package; IOUT = 1A, –40°C ≤ TJ ≤ +85°C; 1.2V ≤ VOUT < 1.5Vtyp 1000 · max 1050 mV6
Dropout voltage VDODBV package; IOUT = 1A, –40°C ≤ TJ ≤ +125°C; 1.2V ≤ VOUT < 1.5Vmax 1100 mV6
Power supply rejection ratio PSRRf = 1kHz, VIN = VOUT + 1V, IOUT = 50mAtyp 52 dB6
Power supply rejection ratio PSRRf = 100kHz, VIN = VOUT + 1 V, IOUT = 50mAtyp 46 dB6
Power supply rejection ratio PSRRf = 1MHz, VIN = VOUT + 1V, IOUT = 50mAtyp 52 dB6
Output noise voltage VnBW = 10Hz to 100kHz, VOUT = 1.2V, IOUT = 1Atyp 71.5 uVRMS6
Undervoltage lockout VUVLOVIN risingmin 1.21 · typ 1.3 · max 1.44 V6
Undervoltage lockout hysteresis VUVLO, HYSTVIN fallingtyp 40 mV6
Startup time tSTRtyp 550 us6
EN pin high voltage (enabled) VHImin 1 V6
EN pin low voltage (enabled) VLOmax 0.3 V6
Enable pin current IENVIN = 5.5V, EN = 5.5Vtyp 10 nA6
Pulldown resistance RPULLDOWNVIN = 3.3V (P version only)typ 95 Ω6
Thermal shutdown TSDShutdown, temperature increasingtyp 165 °C6
Thermal shutdown TSDReset, temperature decreasingtyp 155 °C6

Pins, by the datasheet

5
1 IN
Input supply; connect a capacitor of 1uF or larger to ground. · p. 3
2 GND
Ground pin. · p. 3
3 EN
Drive above VHI to turn on the regulator; drive below VLO for shutdown. · p. 3
4 NC
No internal connection. · p. 3
5 OUT
Regulated output; connect a capacitor of 1uF or larger to ground. · p. 3

Open-source boards using it

5
  • 4 layers50 × 70 mmFPGA Board, the printed circuit board in 3D

    FPGA Board

    sneakylizard123-4/FPGA_Board

    It is built around the Lattice iCE40 FPGA, designed to be programmed over USB through the on-board FT232H. The SPI flash boots the bitstream on power-up.

    106 parts
  • 6 layers100 × 75 mmSTM32H743, the printed circuit board in 3D

    STM32H743

    sneakylizard123-4/STM32H743

    This board puts an STM32H743XIH6 and an iCE40 UP5K on the same PCB. The H743 handles control, USB, Ethernet, storage, and audio.

    171 partsCERN-OHL-P-2.0
  • 2 layersDancing dots pcb, the printed circuit board in 3D

    Dancing dots pcb

    softminus/dancing_dots

    The Fastest Flip Dot in the West

    1,349 parts
  • 4 layers115 × 85 mmDual adc usb, the printed circuit board in 3D

    Dual adc usb

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    175 parts10

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV75712PDBV?

Yes. The symbol is Regulator_Linear:TLV75712PDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV75712PDBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TLV75712PDBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV75712PDBV?

JLCPCB lists it as part C1509296, with 3,964 in stock; the sellers' links on this page open their listings.

What can replace the TLV75712PDBV?

Parts like it in the library: the XC6220B121MR-G by Torex Semiconductor, the TLV75712PDYD by Texas Instruments, the R1172N121D-TR-FE by Nisshinbo Micro Devices Inc. and the XC6220C121MR-G by Torex Semiconductor. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV75712PDBV?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.