Skip to the content
12345

TLV75725PDBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 1A 2.5V 25uA 46dB@(100kHz) 5.5V 71.5uVrms 750mV@(1A) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Soft Start、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV75725PDBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
2,165 at JLCPCB (C2872563)
Used on
4 open-source boards

Overview

The TLV75725PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 1A 2.5V 25uA 46dB@(100kHz) 5.5V 71.5uVrms 750mV@(1A) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Soft Start、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TLV75725PDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 2,165 are in stock at JLCPCB (part C2872563). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:TLV75725PDBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the TLV75725PDBV
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

4
  • 6 layers150 × 105 mmGimlet mgmt bringup, the printed circuit board in 3D

    Gimlet mgmt bringup

    oxidecomputer/hw-gimletlet

    More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab

    322 parts4MPL-2.0
  • 4 layers50 × 70 mmFPGA Board, the printed circuit board in 3D

    FPGA Board

    sneakylizard123-4/FPGA_Board

    It is built around the Lattice iCE40 FPGA, designed to be programmed over USB through the on-board FT232H. The SPI flash boots the bitstream on power-up.

    106 parts
  • 6 layers100 × 75 mmSTM32H743, the printed circuit board in 3D

    STM32H743

    sneakylizard123-4/STM32H743

    This board puts an STM32H743XIH6 and an iCE40 UP5K on the same PCB. The H743 handles control, USB, Ethernet, storage, and audio.

    171 partsCERN-OHL-P-2.0
  • 2 layersDancing dots pcb, the printed circuit board in 3D

    Dancing dots pcb

    softminus/dancing_dots

    The Fastest Flip Dot in the West

    1,349 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV75725PDBV?

Yes. The symbol is Regulator_Linear:TLV75725PDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV75725PDBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TLV75725PDBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV75725PDBV?

JLCPCB lists it as part C2872563, with 2,165 in stock; the sellers' links on this page open their listings.

What can replace the TLV75725PDBV?

Parts like it in the library: the MD7219E25QC3 by Shanghai Mingda Microelectronics, the XC6220C251MR-G by Torex Semiconductor, the S-816A25AMC-BAAT2G by ABLIC and the S-816A25AMC-BAAT2U by ABLIC. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV75725PDBV?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.