Skip to the content

Boards using the MF-MSMF200-2

19 boards

Boards in 13 GitHub repositories, designed in KiCad, that use the MF-MSMF200-2 by Bourns (-40℃~+85℃ 20mΩ 2A 2W 3.2mm 40A 4A 5.4mm 80mΩ 8V 1812 Resettable Fuses ROHS). See how each wires it, with its parts, size, README and files; the MF-MSMF200-2’s symbol, footprint and pinout are on its own page.

  • 4 layers150 × 95 mmSkysweep32 rev c, the printed circuit board in 3D

    Skysweep32 rev c

    bobberdolle1/SkySweep32

    Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype

    103 parts33GPL-3.0
  • 2 layersPi Compute-3-Lite BLANK, the printed circuit board in 3D

    Pi Compute-3-Lite BLANK

    tmtrcreations/Pi-Compute-3-Lite-BLANK

    Blank KiCad schematic for creating a project with the Pi CM3L.

    33 parts30
  • 2 layers95.3 × 69.9 mmPi compute device, the printed circuit board in 3D

    Pi compute device

    marcbperez/pi-compute-device

    A portable device built with the Raspberry Pi Compute module.

    67 parts11Apache-2.0
  • 2 layers71.9 × 98.6 mmArk, the printed circuit board in 3D

    Ark

    tmtrcreations/The_Ark

    PCB design files and configuration files for a Raspberry Pi CM3L based tablet.

    112 parts9MIT
  • 2 layers171.7 × 76.2 mmR2W Pi PGS, the printed circuit board in 3D

    R2W Pi PGS

    tmtrcreations/R2W_Pi_PGS

    Open source handheld gaming device based on the Raspberry Pi CM3L

    45 parts5
  • 6 layers313 × 259.5 mmOpen8-vga motherboard, the printed circuit board in 3D

    Open8-vga motherboard

    adham404/Open8-VGA

    An 8-bit computer from 74HC logic: microcoded CPU, VGA, PS/2, on-board editor and assembler. Play it in your browser.

    322 parts3MIT
  • 4 layers58 × 35 mmESP HI PLUS, the printed circuit board in 3D

    ESP HI PLUS

    dyu134/ESP-HI-PLUS

    The Robot sub-module is a high-performance actuator and sensing expansion board for the ESP-HI-PLUS, designed to transform the device into a mobile or interactive robotic platform.

    88 parts
  • 4 layers100 × 100 mmPhmod, the printed circuit board in 3D

    Phmod

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    234 parts
  • 2 layers83.1 × 34.9 mmTube, the printed circuit board in 3D

    Tube

    llextv/leTube

    LeTube is a DIY project to build a set of 10 LED tubes for stage lighting.

    34 parts
  • 2 layers105 × 98.1 mmLimbo main, the printed circuit board in 3D

    Limbo main

    madmecodes/pcb-limbo-test

    Limbo ESP32-S3 single-PCB and two-PCB prototype designs

    59 parts
  • 6 layers90 × 40 mmSTEREOPI, the printed circuit board in 3D

    STEREOPI

    pavithvishnu/STEREOPI

    This repo contains StereoPi schematics in KiCad. Originally, all schematics have been created in Altium, and now we're in the process of porting them to KiCad.

    187 partsApache-2.0
  • 4 layers76.5 × 75.5 mmPIC18, the printed circuit board in 3D

    PIC18

    pixelatedknight27/PIC18

    Pinai's PIC18 Development Board

    75 parts
  • 2 layers52 × 22 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    13 parts2
  • 4 layers100 × 100 mmAmod a, the printed circuit board in 3D

    Amod a

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    188 parts
  • 4 layers100 × 100 mmAmod b, the printed circuit board in 3D

    Amod b

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    147 parts
  • 4 layers100 × 100 mmAmod c, the printed circuit board in 3D

    Amod c

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    211 parts
  • 4 layers100 × 100 mmAmod m, the printed circuit board in 3D

    Amod m

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    207 parts
  • 4 layers100 × 100 mmIq mod, the printed circuit board in 3D

    Iq mod

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    186 parts
  • 4 layers100 × 100 mmRf mod, the printed circuit board in 3D

    Rf mod

    gallicchio/AMOD-and-RFMOD

    The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

    168 parts