
Pi compute device
marcbperez/pi-compute-device
A portable device built with the Raspberry Pi Compute module.

Blank KiCad schematic for creating a project with the Pi CM3L.
Pi Compute-3-Lite BLANK is an open-source printed circuit board by tmtrcreations, from the tmtrcreations/Pi-Compute-3-Lite-BLANK repository on GitHub. It is a 2-layer board with 33 parts on 136 nets.
It is built around the PAM2306AYPKE, AP7115-25SEG and MF-MSMF200-2. Its parts include 18 capacitors, 6 resistors, 4 ICs, 2 connectors and 2 inductors.
PROJECT HAS BEEN UPDATED TO KICAD V5.0!
The schematic will require some custom parts that can be found in our other repository RPi_CM3_Parts. The schematic contains everything required to get the CM3L to run. The rest of the pins are free to be used for any project. These files are meant to help jumpstart a project that wants to build around the CM3L.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100k | Resistors_SMD:R_0402 | R1, R2, R3, R4, R5, R6 |
| 6 | 47uF | Capacitors_SMD:C_1206 | C2, C12, C14, C15, C16, C17 |
| 4 | 10uF | Capacitors_SMD:C_0805 | C1, C4, C6, C7 |
| 3 | 1uF | Capacitors_SMD:C_0402 | C8, C11, C13 |
| 3 | 4.7uF | Capacitors_SMD:C_0603 | C3, C9, C18 |
| 2 | 100nF | Capacitors_SMD:C_0402 | C5, C10 |
| 2 | 4.7uH | Pi-Library:SRN4018-4R7M | L1, L2 |
| 2 | USB_OTG | Pi-Library:USB_Micro-B_10103594-0001LF | J1, J2 |
| 1 | 1040310811 | Pi-Library:uSD_1040310811 | U4 |
| 1 | AP7115-25SEG | Pi-Library:AP7115-25SEG-7 | U2 |
| 1 | DDR2_SODIMM_CM_3_Lite | Pi-Library:Socket_SODIMM_DDR2 | U3 |
| 1 | MF-MSMF200 | Pi-Library:MF-MSMF200 | F1 |
| 1 | PAM2306AYPKE | Pi-Library:PAM2306AYPKE | U1 |

marcbperez/pi-compute-device
A portable device built with the Raspberry Pi Compute module.

tmtrcreations/The_Ark
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.

tmtrcreations/R2W_Pi_PGS
Open source handheld gaming device based on the Raspberry Pi CM3L

will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"


M2I-HABET/CyStack
This is the electronics stack and associated software for a module payload stack

CopperPilot/rpi-zero-2w-kicad
KiCad port of jonny12375/rp3a0: Raspberry Pi Zero 2W's RP3A0 on a Pi Pico-sized board

s13n/AES42HAT
A digital audio interface in the shape of a Raspberry Pi Hat for AES42 microphones and more.
33 parts, built around the PAM2306AYPKE, AP7115-25SEG and MF-MSMF200-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tmtrcreations/Pi-Compute-3-Lite-BLANK repository on GitHub, at the commit this page was made from: the board is Pi-Compute-3-Lite_BLANK.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tmtrcreations before reusing the design.