2 layers66 × 50.8 mm
Adafruit adafruit tfp401 hdmi to 40pin tft pcb adafruit tfp401 to 40pin tft
oomlout/oomlout_oomp_project_bot_v_2
92 parts
2 layers71.9 × 98.6 mm
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.
- Size
- 71.9 × 98.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 206
- Pads
- 588
- Tracks, vias
- 1,740, 203
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Aug 2017
- Updated
- 24 Apr 2018
Overview
Ark is an open-source printed circuit board by tmtrcreations, from the tmtrcreations/The_Ark repository on GitHub, published under the MIT licence. It is a 2-layer board of 71.9 × 98.6 mm with 112 parts on 206 nets, routed with 1,740 tracks and 203 vias.
It is built around the MCP73871EV, FAN5333BSX and PAM2306AYPKE, with the AP7115-25SEG, MF-MSMF200-2 and BRL3225T150K among its other parts. Its parts include 36 resistors, 27 capacitors, 8 ICs, 7 connectors and 6 diodes.
Main components
8MCP73871EV
-ModulesMicrochip Technology
FAN5333BSX
SOT-23-5-40℃~+85℃ 1 1.5A 1.5MHz 1.8V~5.5V 30V Analog、PWM Boost Built-in DC-DC Over Voltage Protection、Over-Temperature Protection (OTP) SOT-23-5 LED Drivers ROHSonsemiLED Drivers
PAM2306AYPKE
WDFN-12L-EP(3x3)-40℃~+85℃ 1.5MHz 1A 2 2.5V~5.5V 40uA Adjustable Buck Buck Built-in Yes WDFN-12L-EP(3x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
AP7115-25SEG
SOT-353-40℃~+85℃ 1 150mA 2.5V 200mV@(150mA) 5.5V 50uA 50uVrms 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-353 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MF-MSMF200-2
1812-40℃~+85℃ 20mΩ 2A 2W 3.2mm 40A 4A 5.4mm 80mΩ 8V 1812 Resettable Fuses ROHSBournsResettable Fuses
BRL3225T150K
121015uH 530mA 684mΩ 700mA ±10% 1210 Power Inductors ROHSTaiyo YudenPower Inductors
MBR0540
SOD-123-55℃~+150℃ 1 Independent 20uA@40V 40V 5.5A 500mA 510mV@500mA SOD-123 Schottky Diodes ROHSonsemiSchottky Diodes
SMAZ24-TP
SMAUncategorisedTECH PUBLIC
README
README.mdThe_Ark
PCB design files and Raspbian distribution files for a Raspberry Pi CM3L based tablet.
Enabling touch screen
- Add Distro/pullup.dtbo to /boot/overlays
- Add Distro/touchscreen.dtbo to /boot/overlays
- Replace /home/pi/.bashrc with the Distro/.bashrc provided
- Make sure you are using the provided Distro/config.txt in /boot/
Enabling buttons
- Add Distro/buttons.dtbo to /boot/overlays
- Make sure you are using the provided Distro/config.txt in /boot/
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1k | Resistors_SMD:R_0805 | R13, R15, R17, R19, R21, R23, R25, R28, R29, R34, R35 |
| 8 | 100k | Resistors_SMD:R_0402 | R2, R4, R5, R6, R7, R8, R26, R36 |
| 8 | 10k | Resistors_SMD:R_0805 | R9, R11, R12, R14, R16, R18, R20, R22 |
| 7 | 10uF | Capacitors_SMD:C_0805 | C3, C4, C6, C7, C21, C25, C27 |
| 7 | 33 R_PACK4 | Resistors_SMD:R_Array_Convex_4x0603 | RP1, RP2, RP3, RP4, RP5, RP6, RP7 |
| 7 | Test_Point | Pi-Library:Test_Point | PP1, PP2, PP3, PP4, PP5, PP6, PP7 |
| 6 | 47uF | Capacitors_SMD:C_1206 | C1, C12, C14, C15, C16, C17 |
| 6 | SW_PUSH_SMALL_H | Pi-Library:Snapdome_SW | SW1, SW2, SW3, SW4, SW5, SW6 |
| 5 | 1uF | Capacitors_SMD:C_0402 | C9, C11, C13, C19, C20 |
| 4 | 100nF | Capacitors_SMD:C_0402 | C5, C10, C22, C26 |
| 3 | 4.7uF | Capacitors_SMD:C_0603 | C2, C8, C18 |
| 3 | CONN_01X01 | Pi-Library:Fiducial | P5, P6, P7 |
| 2 | 0R | Resistors_SMD:R_0402 | R1, R3 |
| 2 | 1.87M | Resistors_SMD:R_0805 | R27, R31 |
| 2 | 4.7uH | Pi-Library:SRN4018-4R7M | L1, L2 |
| 2 | MF-MSMF200 | Pi-Library:MF-MSMF200 | F1, F2 |
| 1 | 100uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Reflow | C24 |
| 1 | 1040310811 | Pi-Library:uSD_1040310811 | U4 |
| 1 | 12 | Resistors_SMD:R_0805 | R10 |
| 1 | 15k | Resistors_SMD:R_0805 | R33 |
| 1 | 2.2uF | Capacitors_SMD:C_0603 | C23 |
| 1 | 200k | Resistors_SMD:R_0805 | R30 |
| 1 | 270k | Resistors_SMD:R_0805 | R24 |
| 1 | 340k | Resistors_SMD:R_0805 | R32 |
| 1 | 40_Pin_LCD_Out | Pi-Library:LCD_Molex_Connector | P3 |
| 1 | 6.8uH | Pi-Library:ASPI-0615FS-6R8M-T2 | L4 |
| 1 | 6_Pin_Touch_In | Pi-Library:Touch_Molex_Connector | P4 |
| 1 | AP7115-25SEG | Pi-Library:AP7115-25SEG-7 | U2 |
| 1 | BRL3225T150K | Capacitors_SMD:C_1210 | L3 |
| 1 | Blue | LEDs:LED_1206 | D3 |
| 1 | DDR2_SODIMM_CM_3_Lite | Pi-Library:Socket_SODIMM_DDR2 | U3 |
| 1 | FAN5333BSX | Pi-Library:FAN5333BSX | U5 |
| 1 | Green | LEDs:LED_1206 | D5 |
| 1 | JST 2-PH | Pi-Library:JST_2_PH | BT1 |
| 1 | MBR0540 | Diodes_SMD:D_SOD-123 | D1 |
| 1 | MCP73871 | Pi-Library:MCP73871 | U7 |
| 1 | MMUN2133LT1G | Pi-Library:MMUN2133LT1G | Q1 |
| 1 | Orange | LEDs:LED_1206 | D4 |
| 1 | PAM2306AYPKE | Pi-Library:PAM2306AYPKE | U1 |
| 1 | Red | LEDs:LED_1206 | D6 |
| 1 | SMAZ24-TP | Pi-Library:SMAZ24-TP | D2 |
| 1 | SPDT_switch | Pi-Library:spdt_switch_MHSS1105 | U8 |
| 1 | TPS61090RSAR | Pi-Library:TPS61090RSAR | U6 |
| 1 | USB_A | Pi-Library:Wurth_USB_732-11179-1-ND | P2 |
| 1 | USB_OTG | Pi-Library:USB_Micro-B_10103594-0001LF | P1 |
Similar boards
- 2 layers
Pi Compute-3-Lite BLANK
tmtrcreations/Pi-Compute-3-Lite-BLANK
Blank KiCad schematic for creating a project with the Pi CM3L.
33 parts30 - 2 layers95.3 × 69.9 mm
Pi compute device
marcbperez/pi-compute-device
A portable device built with the Raspberry Pi Compute module.
67 parts11Apache-2.0 - 2 layers171.7 × 76.2 mm
R2W Pi PGS
tmtrcreations/R2W_Pi_PGS
Open source handheld gaming device based on the Raspberry Pi CM3L
45 parts5 - 4 layers56.5 × 48.1 mm
Display driver
tangles-0/cyberdeck-scout
// #ifndef PINPA0 // #define PINPA0 11 // #endif // #ifndef PINPA1 // #define PINPA1 8 // #endif // #ifndef PINPA2 // #define PINPA2 9 // #endif // #ifndef PINPA3 // #define PINPA3 10 // #endif // #ifndef PINPA4 //…
62 parts6 - 2 layers96 × 34.1 mm
- 2 layers120 × 66 mm
Io daughterboard
kbob/MinimumViableSynth
A virtual analog synthesizer with lots of knobs and buttons.
136 parts28GPL-3.0 - 4 layers166.6 × 94 mm
Panel
nrdsp/rvPhone
The goal of the this project is to develop a privacy enhanced, simple and fully featured mobile phone.
319 parts
Questions
How big is the Ark PCB?
It measures 71.9 × 98.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ark use?
112 parts, built around the MCP73871EV, FAN5333BSX, PAM2306AYPKE and AP7115-25SEG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ark KiCad files?
From the tmtrcreations/The_Ark repository on GitHub, at the commit this page was made from: the board is Schematics/Ark.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ark design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).