
Pi Compute-3-Lite BLANK
tmtrcreations/Pi-Compute-3-Lite-BLANK
Blank KiCad schematic for creating a project with the Pi CM3L.

Open source handheld gaming device based on the Raspberry Pi CM3L
R2W Pi PGS is an open-source printed circuit board by tmtrcreations, from the tmtrcreations/R2W_Pi_PGS repository on GitHub. It is a 2-layer board of 171.7 × 76.2 mm with 45 parts on 164 nets.
It is built around the PAM2306AYPKE, AP7115-25SEG and MF-MSMF200-2. Its parts include 18 capacitors, 10 switches, 7 resistors, 4 ICs and 3 connectors.
Open source handheld gaming device based on the Raspberry Pi CM3L
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100k | Resistors_SMD:R_0402 | R1, R2, R3, R4, R5, R6 |
| 6 | 47uF | Capacitors_SMD:C_1206 | C2, C12, C14, C15, C16, C17 |
| 4 | 10uF | Capacitors_SMD:C_0805 | C1, C4, C6, C7 |
| 3 | 1uF | Capacitors_SMD:C_0402 | C8, C11, C13 |
| 3 | 4.7uF | Capacitors_SMD:C_0603 | C3, C9, C18 |
| 2 | 100nF | Capacitors_SMD:C_0402 | C5, C10 |
| 2 | 4.7uH | Pi-Library:SRN4018-4R7M | L1, L2 |
| 2 | USB_OTG | Pi-Library:USB_Micro-B_10103594-0001LF | J1, J2 |
| 1 | 1040310811 | Pi-Library:uSD_1040310811 | U4 |
| 1 | 10k | Resistors_SMD:R_0805 | R7 |
| 1 | 40_Pin_LCD | Pi-Library:LCD_Molex_Connector | J3 |
| 1 | A | Pi-Library:E-SW_SMD | SW8 |
| 1 | AP7115-25SEG | Pi-Library:AP7115-25SEG-7 | U2 |
| 1 | B | Pi-Library:E-SW_SMD | SW10 |
| 1 | DDR2_SODIMM_CM_3_Lite | Pi-Library:Socket_SODIMM_DDR2 | U3 |
| 1 | DOWN | Pi-Library:E-SW_SMD | SW9 |
| 1 | LEFT | Pi-Library:E-SW_SMD | SW5 |
| 1 | L_BUMP | Pi-Library:Tact-switch_right_thru_hole | SW2 |
| 1 | MF-MSMF200 | Pi-Library:MF-MSMF200 | F1 |
| 1 | PAM2306AYPKE | Pi-Library:PAM2306AYPKE | U1 |
| 1 | RIGHT | Pi-Library:E-SW_SMD | SW6 |
| 1 | R_BUMP | Pi-Library:Tact-switch_right_thru_hole | SW1 |
| 1 | UP | Pi-Library:E-SW_SMD | SW3 |
| 1 | X | Pi-Library:E-SW_SMD | SW4 |
| 1 | Y | Pi-Library:E-SW_SMD | SW7 |

tmtrcreations/Pi-Compute-3-Lite-BLANK
Blank KiCad schematic for creating a project with the Pi CM3L.

marcbperez/pi-compute-device
A portable device built with the Raspberry Pi Compute module.

tmtrcreations/The_Ark
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.

will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"


M2I-HABET/CyStack
This is the electronics stack and associated software for a module payload stack

CopperPilot/rpi-zero-2w-kicad
KiCad port of jonny12375/rp3a0: Raspberry Pi Zero 2W's RP3A0 on a Pi Pico-sized board

s13n/AES42HAT
A digital audio interface in the shape of a Raspberry Pi Hat for AES42 microphones and more.
It measures 171.7 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the PAM2306AYPKE, AP7115-25SEG and MF-MSMF200-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tmtrcreations/R2W_Pi_PGS repository on GitHub, at the commit this page was made from: the board is R2W_Pi_PGS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask tmtrcreations before reusing the design.