2 layers100 × 100 mm
Feather LORA
M2I-HABET/CyStack
This is the electronics stack and associated software for a module payload stack
10 parts3
2 layers230 × 70 mm
CyCompute
M2I-HABET/CyStack3This is the electronics stack and associated software for a module payload stack
- Size
- 230 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 100
- Pads
- 578
- Tracks, vias
- 11, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Dec 2018
- Updated
- 21 Aug 2022
Overview
CyCompute is an open-source printed circuit board by M2I-HABET, from the M2I-HABET/CyStack repository on GitHub. It is a 2-layer board of 230 × 70 mm with 29 parts on 100 nets, routed with 11 tracks and 0 vias.
It is built around the LAN9514-JZX, PAM2306AYPKE and IP4234CZ6, with the SP2526A-2EN-L/TR and RJ45 among its other parts. Its parts include 18 connectors, 7 ICs and 3 capacitors.
Main components
5
LAN9514-JZX
QFN-64-EP(9x9)0℃~+70℃ 1.8V、3.3V 480Mbps Hub USB 2.0 QFN-64-EP(9x9) USB HUB Controllers ROHSMicrochip TechnologyUSB Converters
PAM2306AYPKE
WDFN-12L-EP(3x3)-40℃~+85℃ 1.5MHz 1A 2 2.5V~5.5V 40uA Adjustable Buck Buck Built-in Yes WDFN-12L-EP(3x3) DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
IP4234CZ6
TSOP-6-40℃~+85℃@(Ta) 100W 100nA 3.1pF 5.5V 6V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 TSOP-6 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
SP2526A-2EN-L/TR
SOIC-8-40℃~+85℃ 110mΩ 2 3V~5.5V 600mA Active Low Load Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Over Temperature Protection SOIC-8 Power Distribution Switches ROHSMaxLinearPower Distribution Switches
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdCyStack
This is the electronics stack and associated software for a module payload stack
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | RJ11 | Connector_RJ:RJ12_Amphenol_54601 | J9, J10, J11, J12, J13, J15 |
| 6 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J1, J2, J3, J4, J5, J14 |
| 2 | CAP100n | Capacitor_SMD:C_0805_2012Metric | C11, C15 |
| 2 | IP4234CZ6 | gsg-modules:SOT457 | U4, U5 |
| 2 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J16, J17 |
| 1 | 15pf | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | Board_RPi_CM3lite_200pConnector | Pi_Sodimm:sodimm_pi | MD1 |
| 1 | CAM0 | cam:FPC_22 | J6 |
| 1 | CAM1 | cam:FPC_22 | J7 |
| 1 | Conn_01x04_Female | Connector_Molex:Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal | J18 |
| 1 | LAN9514 | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP7.3x7.3mm | U2 |
| 1 | P82B715DR | P82B715DR:P82B715DR | U3 |
| 1 | PAM2306AYPKE | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | Pi Std header | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J8 |
| 1 | SP2526A-2EN-L | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
More from M2I-HABET/CyStack
2- 2 layers110 × 70 mm
CyBack
M2I-HABET/CyStack
This is the electronics stack and associated software for a module payload stack
8 parts3
Similar boards
- 4 layers145 × 57 mm
- 4 layers26.4 × 56 mm
RPI5-SDexpress Hat
will127534/RPI5-SDexpress-Hat
ctrl-c "RPI5-CFE-Hat" ctrl-v "RPI5-SDexpress-Hat"
51 parts37MIT - 2 layers
Pi Compute-3-Lite BLANK
tmtrcreations/Pi-Compute-3-Lite-BLANK
Blank KiCad schematic for creating a project with the Pi CM3L.
33 parts30 - 2 layers95.3 × 69.9 mm
Pi compute device
marcbperez/pi-compute-device
A portable device built with the Raspberry Pi Compute module.
67 parts11Apache-2.0 - 2 layers71.9 × 98.6 mm
Ark
tmtrcreations/The_Ark
PCB design files and configuration files for a Raspberry Pi CM3L based tablet.
112 parts9MIT - 2 layers171.7 × 76.2 mm
R2W Pi PGS
tmtrcreations/R2W_Pi_PGS
Open source handheld gaming device based on the Raspberry Pi CM3L
45 parts5 - 8 layers35.5 × 25 mm
- 6 layers60 × 20.4 mm
Rp3a0-mini
CopperPilot/rpi-zero-2w-kicad
KiCad port of jonny12375/rp3a0: Raspberry Pi Zero 2W's RP3A0 on a Pi Pico-sized board
124 parts1
Questions
How big is the CyCompute PCB?
It measures 230 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CyCompute use?
29 parts, built around the LAN9514-JZX, PAM2306AYPKE, IP4234CZ6 and SP2526A-2EN-L/TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CyCompute KiCad files?
From the M2I-HABET/CyStack repository on GitHub, at the commit this page was made from: the board is CyCompute/CyCompute/CyCompute.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CyCompute design in my own project?
Its repository states no licence, so its author keeps all rights: ask M2I-HABET before reusing the design.