2 layers36 × 48.3 mm
SA818 BREAKOUT
galopago/dil-breakout-pcb
Open source breakout boards for "stamp like" rf modules. Good for experimenting on a breadboard or to be used as sub-boards.
14 parts2MIT
RF
143 boardsKiCad boards from 46 GitHub repositories tagged “rf”, the most starred first; open any of them in PCBKit.
- 2 layers17.8 × 22 mm
A7139-Breakout
mcauser/A7139-Breakout
Breakout board for the A7139 433MHz RF transceiver module
2 parts2MIT - 6 layers268 × 230 mm
Rf board
PE1RGU/hf-antenna-switch
Remote HF antenna switch: 3 radios x 4 antennas (path to 8), outdoor relay unit with a hardware safety chain, controlled over Cat6 from a shack interface. KiCad 10, open hardware, designed together with an AI.
357 parts2CERN-OHL-S-2.0 - 2 layers77.5 × 57.1 mm
Rx new full
rf-designers/transceiver
Repository containing the design for the YO6SSW SDR transceiver, version 2
197 parts2MIT - 4 layers50.2 × 40.2 mm
LIONv3
RodrigoCAndrade/LIONv3-Mini
The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.
88 parts2 - 2 layers86.5 × 92 mm
- 4 layers58 × 31 mm
- 4 layers65.5 × 39 mm
- 4 layers67.3 × 55.2 mm
Isno super v1.0
Isno-Open/OpenSuperRF
Design ouvert de la carte radio ISNO Super v1.0 (ESP32-S3, CC1101 433/868) pour firmwares radio comme OpenProfalux. CERN-OHL-S v2.
101 parts1CERN-OHL-S-2.0 - 4 layers80 × 160 mm
PCB V3.1
Jonathan-0101/skeletonKey
BEng Dissertation; Penetration-testing device to highlight security system vulnerabilities
299 parts1GPL-3.0 - 2 layers20.3 × 20.3 mm
CC2500-Breakout
mcauser/CC2500-Breakout
Breakout board for the CC2500 2.4GHz RF transceiver module
2 parts1MIT - 2 layers
TAS RX-900-C3
mhalaba/tas-elrs
TAS-ELRS is an open-source, jamming-resistant radio link for drone control: encrypted RC commands (ChaCha20), anti-replay, EW-status telemetry to the flight controller, deterministic FHSS channel rotation, and…
5 parts1GPL-3.0 - 4 layers48 × 33 mm
Stm32-bt board
OdaiJ/stm32-bt-board
My attempt at following the Phil's Lab KiCad V7 tutorial on YouTube
60 parts1 - 2 layers76 × 61.5 mm
Bt jammer 1.0
Romemu1810-tech/bluetooth_jammer_experimento
Proyecto personal y experimental para el aprendizaje de electrónica, RF y comunicaciones Bluetooth, desarrollado con fines educativos y de investigación.
12 parts1 - 2 layers85 × 49 mm
2db per div
benishor/w7zoi-sa-2dB-per-div
2dB per division mod for W7ZOI/K7TAU spectrum analyzer.
27 parts - 2 layers
CoinCellSensor
frankie-eight-days/mochiRadio
A 915MHz radio w/ temp sensor, pressure sensor, LED and ATMega328p
4 partsMIT - 2 layers60 × 60 mm
Rf lna
Jakcar22/rf-lna
915 MHz GaAs MMIC Low Noise Amplifier (LNA) PCB built around the Qorvo SPF5189Z. KiCAD design (DRC clean), LTspice bias and supply-filter simulation, planned ADS S-parameter analysis and VNA validation.
10 parts - 4 layers
Lora node
Mehdi-Ldj/lora-ble-sensor-node
Off-grid LoRa/BLE sensor node — 868 MHz LoRa, 2.4 GHz BLE, solar/LiFePO4
110 partsCERN-OHL-P-2.0 - 2 layers40.1 × 40.1 mm
RFSWITCH01
mlab-modules/RFSWITCH01
The module featuring two RF switches. Designed for radio transceivers with separate input and output.
45 partsGPL-3.0 - 2 layers85.6 × 54 mm
Rf proto card
siliconwitchery/rf-proto-card
Business card combined with an RF prototyping board
54 parts - 4 layers38.9 × 37.7 mm
Synthesizer VHF
wa1hco/Synthesizer-VHF
35 MHz–4.4 GHz ADF4351 synthesizer: ATtiny1616 + USB-C, 10 MHz ref in/out, JLCPCB-ready KiCad board for a Hammond die-cast box
85 partsGPL-3.0 - 4 layers46 × 69 mm
- 2 layers8.5 × 41 mm
- 4 layers44 × 39 mm
Ad9864 breakout
loxodes/vna
Under development open hardware microwave vector network analyzer
83 parts205