4 layers209 × 97.3 mm
Keypad
JGilcreast/MetalHead
An opensource firmware and software drop-in replacement for the 85V Automatic Stirrup Bender by CRS Specialties Inc. ...short story behind the name...
206 parts
2 layers77.5 × 57.1 mm
Rx new full
rf-designers/transceiver2Repository containing the design for the YO6SSW SDR transceiver, version 2
- Size
- 77.5 × 57.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 197
- Nets
- 102
- Pads
- 520
- Tracks, vias
- 611, 48
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Sep 2020
- Updated
- 1 Jun 2021
Overview
Rx new full is an open-source printed circuit board by rf-designers, from the rf-designers/transceiver repository on GitHub, published under the MIT licence. It is a 2-layer board of 77.5 × 57.1 mm with 197 parts on 102 nets, routed with 611 tracks and 48 vias.
It is built around the OPA1662AID, OPA1664AID and 74AUP1G74DC, with the SN74CBT3253D, NC7SZ00M5X and TPS79101DBVREP among its other parts. Its parts include 82 resistors, 69 capacitors, 16 transistors, 12 ICs and 8 connectors. It belongs with the radio and wireless boards of this library.
Main components
10
OPA1662AID
SOIC-8-1.5V~18V、3V~36V -40℃~+85℃ 0.00006% 1.5mA 2-Channel SOIC-8 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers
OPA1664AID
SOIC-14-1.5V~18V、3V~36V -40℃~+85℃ 0.00006% 1.5mA 4-Channel ESD protection SOIC-14 Operational Amplifier ROHSTexas InstrumentsAudio Amplifiers
74AUP1G74DC
VSSOP-8-300ps -40℃~+125℃ 0.6pF 1 1 300ps 315MHz 4mA 4mA 5.8ns@3.3V,30pF 500nA 74AUP Series 800mV~3.6V Asynchronous Complementary D-Type Rising Edge Set and Reset VSSOP-8 Flip Flops ROHSNexperiaFlip Flops
SN74CBT3253D
SOIC-16-40℃~+85℃ 1.6ns@5V,50pF 3uA 4.5V~5.5V 74CBT Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders
NC7SZ00M5X
SOT-23-5-40℃~+85℃ 1 1.65V~5.5V 2uA 32mA 32mA 4.3ns@5V,50pF 7SZ Series NAND Gate Overvoltage-tolerant input、Local shutdown mode SOT-23-5 Logic Gates ROHSonsemiLogic Gates
TPS79101DBVREP
SOT-23-6-40℃~+125℃@(Tj) 1 1.2V~5.5V 100mA 15uVrms 170uA 38mV@(100mA) 5.5V 70dB@(10kHz) Adjustable Enable Positive SOT-23-6 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BC848
SOT-23SOT-23 Bipolar (BJT) ROHSTDDBipolar (BJT)BC858
SOT-23SOT-23 Bipolar (BJT) ROHSHTBipolar Transistors - BJTBAT64-04
SOT-231 Pair Series Connection 250mA 2uA@25V 40V 750mV@100mA 800mA SOT-23 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
BC327
TO-921 PNP 100MHz 45V 5V 625mW 630 700mV 800mA PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
README
README.mdYO6SSW SDR transceiver
Tayloe enabled SDR frontend.
Designers
- Frédéric Boes
- Adrian Scripcă
Parts
197| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C11, C16, C17, C20, C21, C23, C31, C33, C34, C37, C40, C42, C43, C44, C46 +11 |
| 25 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C10, C13, C14, C15, C22, C24, C32, C35, C36, C39, C41, C47 +9 |
| 14 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R21, R22, R30, R43, R44, R45, R46, R47, R48, R49, R55, R56, R60, R61 |
| 9 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R31, R32, R33, R34, R51, R52, R53, R57, R74 |
| 9 | 47u | custom_library:CP_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C6, C9, C12, C18, C19, C20, C38, C42, C45 |
| 6 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q3, Q5, Q6, Q12, Q13, Q15 |
| 5 | BC848 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3, Q7, Q9, Q11 |
| 4 | 0.22u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C25, C26, C27, C28 |
| 4 | 330k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R25, R26, R28, R59 |
| 4 | 3K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14, R15, R17, R19 |
| 4 | 47 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R67, R68, R69, R70 |
| 4 | BC858 | Package_TO_SOT_SMD:SOT-23 | Q2, Q4, Q8, Q14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 4 | NF | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R8, R9, R29 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R25, R27, R58 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R26, R65, R71 |
| 3 | 1E | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R7, R66 |
| 3 | 33k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4, R10 |
| 2 | 100E | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R23, R24 |
| 2 | 10k? | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12, R13 |
| 2 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2 |
| 2 | 15K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R36, R40 |
| 2 | 27K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R18 |
| 2 | 27k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R62 |
| 2 | 33K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R35, R39 |
| 2 | 3K3 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R38, R42 |
| 2 | 680K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12, R13 |
| 2 | 74AUP1G74 | Package_SO:VSSOP-8_2.4x2.1mm_P0.5mm | U7, U8 |
| 2 | 820k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R50, R73 |
| 2 | 8K2 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R37, R41 |
| 2 | AD797 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 2 | ADT4-6WT | RF_Mini-Circuits:Mini-Circuits_CD636_H4.11mm | TR1, TR2 |
| 2 | NF | custom_library:CP_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C30, C62 |
| 2 | SN74CBT3253 | Package_SO:SOP-16_4.4x10.4mm_P1.27mm | U2, U11 |
| 1 | 0.01u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C13 |
| 1 | 1.8k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R63 |
| 1 | 120k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | 180 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 18k? | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R64 |
| 1 | 1n0 | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C29 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R20 |
| 1 | 27E | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R54 |
| 1 | 33kk | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | 4052 | Package_SO:SOP-16_4.4x10.4mm_P1.27mm | U9 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R72 |
| 1 | 4LO_IN | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J4 |
| 1 | 5.6K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 56k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 6k8 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | BAT64-04 | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | BC327 | Package_TO_SOT_THT:TO-92_Inline | Q10 |
| 1 | IQ_IN | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J6 |
| 1 | IQ_OUT | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J3 |
| 1 | LM4040DBZ-3 | Package_TO_SOT_SMD:SOT-23 | U12 |
| 1 | LOGO | benzen_logos:benzene_only_logo | G*** |
| 1 | NC7SZ00M5X | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U5 |
| 1 | OPA1662 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | OPA1664 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | PWR_IN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | RF_IN | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J1 |
| 1 | RX_GAIN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | TPS79101DBVREP | custom_library:Texas_Instruments-TPS79101DBVREP-Level_A | U1 |
| 1 | TX_OUT | Connector_Coaxial:SMA_Amphenol_901-144_Vertical | J7 |
Questions
How big is the Rx new full PCB?
It measures 77.5 × 57.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rx new full use?
197 parts, built around the OPA1662AID, OPA1664AID, 74AUP1G74DC and SN74CBT3253D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rx new full KiCad files?
From the rf-designers/transceiver repository on GitHub, at the commit this page was made from: the board is rx-new-full.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rx new full design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers150 × 100 mm
- 4 layers120 × 94 mm
Alfred
mkol-ME/A1-4RD
Local voice assistant with a character: Whisper and a 26B LLM on a reflashed datacenter GPU, a custom voice, a 3D-printed body and a KiCad PCB
125 partsMIT - 2 layers127 × 114.3 mm
- 4 layers280 × 100 mm
- 2 layers65 × 128.5 mm
MiniOSC
benjiaomodular/MiniOSC
A schmitt-trigger inverter based sawtooth and pulse oscillator module
82 parts36CC-BY-SA-4.0 - 2 layers105 × 56 mm
LCD FPGA
aeberbach/ReAnalog
Replacing the PSU, CRT and analog board in Macintosh SE and SE/30
68 parts1 - 2 layers80 × 80 mm
Motherboard
RICCIARDI-Adrien/Transistor_Christmas_Lights
A blinking Christmas lights using only bipolar transistors for its logic.
136 partsMIT